วีดีโอ

I love John Candy’s movies.

I currently have a 2inch lift on my leaf springs. Would it be wise to install this with the lift?

Hi where can I get this super spring I'm in Trinidad thanks.

Takes him 20 mins per side the average Joe will take an hour each side probably

You told us the tape measure was for measuring things but didnt tell whot the other tool were for

Looking at the first load there seems to be weight in the truck, it's squatted showing part of the frame then you add the weight on the fork lift. Then you take the weight out all of it and all the frame is showing. You need to measure the height from ground level the second time before your new install for true measurements

Holy shit! It's Aussie John Candy!

F 97&*

I put 810kg caravan on navara doesn't move a bit

Very good บักหำ 🇱🇦

If you now check the weight on the front wheels it will now be below factory figure because of the see-saw effect of all that weight behind the rear axle. The problem with all these dual cabs is the weight of the load is mostly behind the axle. The only correct answer is to lengthen the chassis in front of the rear spring mount by about 500-600 mm (which is what the manufacturers should do) to get the axle UNDER the load. How many big trucks do you see with the rear axle well forward of the weight?? Doing what this guy did makes the steering very light and dangerous especially in wet weather.

A very precise and clear instructional video. But I wonder why anyone would bother with a Great Wall. I had one for 9 years until I traded up to a BT50. The Great Wall is only good as an around town ute to take rubbish to the dump or the dogs to the park.

I need this

The US models of this truck recommend a mounting kit, but maybe I don't need it?

Hi, does this also raise the unladen ride height?

Are longer rear shocks needed with the use of the super springs?

Sounds like bullshit

My ranger was always hopping on highways becouse i am not carrying heavy loads permanent, we remove one of the main leafs of the suspensiyon and it became more comfy, i am wondering will it occur any problem in the future?

Supersprings Nissan Navara D40, please to make the purchase. send data and budget. for peru -lima

What holds the center of the spring from coming off the bumps top? I would think it could slide off one side or the other eventually.

Navara has payload of 975 kg.not 75okg

Is it John Candy from Canadian Bacon?

On a Nissan Navara D40 ?! .. you'd be NUTS to try this .. these frames rust so fast the Titanic has better steel quality !

Notice, he`s shifted the handbrake cable lower onto the spring.