วีดีโอ

I used 1.5mm galvanized sheet. good luck

@@matevzlah3870 A.C.Šempeter, l.p.

JUS, ima se, može se...

Vsekakor original.

Thanks for the encouraging comment and have a nice day

Hello. Thank you for your inquiry, but we are currently overloaded and cannot accept additional work. Thank you for your understanding and have a nice day

It is recommended to reset the computer after each replacement of electronic parts. The thermostat is controlled electronically, so I recommend using a suitable diagnostic device. Thank you for your inquiry and have a nice day

Of course, we bleed the brake fluid through the brake cylinder with a special device that is intended for this purpose. However, the video is made to focus on damaged brake shoes that have come off. We wanted to show where the cause of the bike blocking is hidden, so that people with such a problem can find their way around. Thank you for your inquiry and have a nice day

In your case it would be good to replace the oil pressure sensor because that is the least expensive. If the problem is still present, it is necessary to measure the oil pressure and if the oil pressure is too low, then it could be a mechanical fault...it could be that the connecting rod bearings are worn out and the oil is leaking...or something similar. I wish you luck with the repair. Thank you for your inquiry and have a nice day.

Jel to onaj šaraf što gleda u sic

If the hydraulic jumps, then this is a sign that there is an oil leak somewhere. Most often, oil leaks on the master cylinder or the piston seal is worn out... but oil can leak in many other places. I wish you the best of luck with the repair. Have a nice day

Thanks

​@@MadMaxTheProducerpozdrav, odakle ste

Hello, the current price in Slovenia is an electronically controlled thermostat, the retail price is 264,30 EUR. Thank you for inquiry. Max

@MadMaxTheProducer 264 very goog price it's over 400 in ireland have you got a link ? To buy

What tractor model and year is your tractor?

thank God, I'm glad you're satisfied, best regards

Brother ​@@MadMaxTheProducer I mean , will this solve my problem with the blue smoke ? Has this for you solved that problem with the blue smoke ?

@@bromohamad81 Hello, It's best to remove the valve cover and if the membrane is damaged, the problem must be there. we solved the problem by replacing the cover. Thank you for inquiry. Max

yes i think you are right but be careful. thanks for watching and nicely written, and best regards

I fix everything that comes and goes, but I'm very busy with work right now, so I'm not looking for anything extra. Thank you for inquiry. Max

Project prices are very rubbery...thanks for your inquiry and have a nice day

Two liters is not enough for the hydraulic system. The catalog for this tractor states 12 liters.

I used a 36 wrench to install and remove the main shaft pulley. Warning, the thread is left!

12 liters of S3 SAE 15W 30 engine oil go into the hydraulic system.

2litre.0k

Hello Thanks for the warning. Apparently, it is an error in the part where the V-SEAL number 2:48 time is displayed. The correct catalog number is 347 1299. You can view and order on this page. Thank you. trgovina.agrocenter-sempeter.eu/catalogue/manseta-bata-hidravlike-td-4506-5506-tx55-td-45-48-_35836/

Thanks very much

I'm glad you resolved the situation. Greetings

Thanks for the nice write up. This thermostat is really hard to come by and I'm glad you found the video useful...regards

A different thermostat is installed in your vehicle. SU001A2479 is an original TOYOTA CATALOG number. copy of VERNET no. TH7144.83J and can be in the following vehicles: Cooling system thermostat (83°C, in housing) fits: DS DS 5; CITROEN C4 GRAND PICASSO I, C4 II, C4 PICASSO I, C5 III, C8, DS4, DS5, JUMPY II; FIAT SCUDO; FORD C-MAX II, FOCUS III 2.0ALK-3.0D 07.04-, greetings.

You're right. However, the car had very low miles and the interior was like new, so we decided to have this procedure done.

Thanks

good luck

Resnično moram narediti prispevek o temu...Obstaja sredstvo "pasta" ABRO GRINDING PASTE za prilagoditev ventilov na glavi. pravtako jo lahko uporabite za prilagoditev glave na valj. Prvič uporabite grobo pasto in vrtite glavo po valju toliko časa, da je sled poliranja enakomerna po vsej površini, ki jo polirate. Potsopek ponovite še z fino pasto in to je to. Postopek lahko opravite na tudi na stružnici, vpnete valj v stružnico, vklopite majhne obrate in pritisnete glavo na valj...Ali glavo zamenjate. nova je cenovno dostopna...l.p. I really need to do a post on this...There is an ABRO GRINDING PASTE to adjust the head valves. it can also be used to adjust the head to the cylinder. For the first time, use a coarse paste and rotate the head on the roller until the polishing mark is uniform over the entire surface to be polished. Repeat the dip with fine paste and that's it. You can also do the process on a lathe, clamp the cylinder in the lathe, turn on small revolutions and press the head onto the cylinder...Or replace the head. new is affordable...

Najlepša hvala! Če kupim novo glavo jo moram prav tako spolirati na valj? Ali jo samo tako kot je namestim in zategnem.

@@miranvigali2549Samo zmontirate in mora delat...

Pozdravljeni. Naročamo predvsem v AGROCENTER šempeter. So zelo prijazni in pripravljeni svetovati, pošljejo pa tudi po pošti. Mislim, da lahko naročite tri vrste zavornih oblog, razlikujejo se pa po kvaliteti. Naročite najboljše, ne bo vam žal...Želim vam uspešno zamenjavo... Hello. We mainly order from AGROCENTER Šempeter. They are very friendly and ready to give advice, and they also send by post. I think there are three types of brake pads you can order, and they differ in quality. Order the best, you won't regret it... I wish you a successful exchange...

Cilinder in bat morata biti gladka brez grobih poškodb za optimalno delovanje. Če je cilinder poškodovan lahko na stiku kjer se dotika tesnilo pride do puščanja olja. To pa povzroči nestabilno delovanje oz. Hidravlika ne dvigne bremen...