วีดีโอ

That’s what it’s all about!😀 What’s your oldest plane that you still fly? I’ve got a few T28's that are old as dirt… and they look the part. 😂

Fine flying. I would want to know what is your opinion about slats? That's why because i want to fly slowly and of course do stol-landings.

This looks a gem of a plane. The cabin crew barely spilled a drop!

You might experiment with a Timber X spinner and two bladed 13x4 prop. It is noisier than the three-blade, but more powerful.

A very helpful, practical and realistic review and demonstration of this airplane.

Great flying plane! Love your content. Your voice is very relaxing as well. Thanks.

How do you rate the TT Evo against the much lighter Bigfoot? What I understood is, that the more it comes to bush flying, the lighter the better.

Thanks for your review for this wonderful plane. I have had my eye on it for a year now. One day. lol. I have wanted to ask you this for a while now. I too, fly at a sports field early in the morning on weekdays. No one around to bother me except for some dog walkers. Is there an RC club and field in your area? I have one close to me put prefer to fly on my own, until I am told that I can’t.

Dubro tires are nice and all but there made for planes with alot of wing area and power to save yourself from a premature stall cause as we all know the heavier the plane the faster and harder the stall is. Too reduce bounce on pneumatic tires is to let out a bunch of air

Nice piloting while keeping her in close for the camera. I got this model for myself for Christmas but have only flown it once. I liked it but I keep messing around with other models that have been giving me problems. I should put the problem models aside for a bit and just get out with my good flyers and enjoy myself. The problem planes can wait. [Easy to say but hard to do.]

Great review and it seems that you like it!

Lovin’ it! Checkout my 1300mm PA-18.. flown with FPV! 😁😁😁

Nice flying Crashed mine flying to slow. Those big wheels are heavy. Arrows Bigfoot is by far a better flying plane.

i flew mine in 35mph wind and it did amazing in it for such a small tiny plane i like the 1300man 3s battery in mine for best wind penetration

I had problems keeping orientation of that plane so i put 8 white invasion stripes on the underside of the wing and put 2 long stripes of white tape on both side of the front leading edge of the wings! Man what a difference that made you should try that yourself i think youd love the look of it as well. Cheers Buddy...

On small simple 4 channel Rc Airplanes i dont understand why you dont go with the much cheaper and affordable Spektrum AR410 anntena less Recievers? there only like $35 dollars in America

Touch and go is fun. The last one was butter

I bought this plane yesterday, build without the box. New and with a 4S 2200 smart battery for less then half the price total. I feel so lucky. Question, what smart charger do you have? Thx and greetings from the Netherlands 🇳🇱

I'd really like to see you match this model up against the new Super Timber. Judging from what I see here on YT I think you'd be liking the Super Timber more than this PA 18.

It's a good plane and like you said, flies off grass well, goes back in the box for storage, good gear, good build quality. But.... IMO it is quite underpowered as is the 1300mm version. I sold mine, would buy a V2 if they gave it a little more oooomph.

I really do like that plane. BUT, having said that, I will never purchase it thanks to the very poor FMS customer service in China. I had a problem with my only FMS plane. The SuperEZ. They had no intention of helping me with the problem after going back and forth with them for at least 6 months. I said, ok fine. I will never ever deal with your company again. I am sticking to my guns. I wonder if anyone else has had similar experiences with this company. I have only bought planes from Horizon Hobby ever since. They are a wonderful company with excellent customer service. Sorry for commenting on your channel in a negative way. Next comment will be a good one. I promise. Keep those wonderful reviews coming.

Your review sealed the deal for me. I mainly fly quadcopter fpv drones but I decided to give rc planes a try. Thanks for detailed and exciting video also. Glad you saved it!!🎉

Well done & so well explained. I just might order on as they are down by $100 here in Australia (A$240) Yellow is the go I think

👍👍 what is better Flying, or just relaxing and enjoying the beauty that surrounds you?

Love that sound.. Dang, I need to get the floats on a few of mine....

lol, that's old

Looks an excellent lake flyer. Well flown.🪃🇦🇺🦘

I watched this video and many like it, and decided not to buy this plane. After a while its good looks got the better of me and I bought it anyway in hopes they'd improved it and addressed the tip stall and other flight issues. To my pleasant surprise it does appear to be the case. It isn't great build quality (still hard to assemble wings and I broke one of the turning keys that pin the wings down) and I couldn't tell you how it flies compared to other planes, but the rudder does appear to have an extremely limited range of movement, though there have been zero tip stall issues and each of the many crashes have been entirely my fault. Over all I'm very happy with it and would recommend it to another beginner wanting a good looking plane with good features for not much money.

What the CG for 3s 2200?

What the CG for 3s 2200mah?

All those FMS 800mm series planes fly a 100 times better on 3s with the stock componants motor and 20amp esc are plenty adaquate. Best to run about 1000mah to 1300 mah battery all the way forward. Love the T-28 as well

An explanation or showing of how you did the carbon rod reinforcement would be greatly appreciated. Thanks.

I have had my Valiant for about four years now and still adore it. It is so friendly and capable. An unsung hero of the E-flite line.

One of my favorite planes. Super easy to fly, tough landing gear, and always fun to take out to the field. I took the wheel pants off off mine and added bush wheels. Love it! Thanks for the video.

I'm going through a similar journey with the fms 980mm p40. I purchased it used from Brian Phillips after watching his review on it. It's just too darn heavy because it's over motored. And the wheels on those front to back swinging retracts are too heavy, making it fly wonky. I had an Avian 45amp esc and the fms Pa18 1.3m motor handy. So, I swapped out the stock power system for those and found a set of ultra light 2.5 in. Wheels that fit perfectly. Now, that little bird is one of my favorite flyers. It's lighter wing loading makes it more stable at low speeds. It lands like a dream. And it's still blazing fast on 4s 2200 packs. It's an amazing feeling, after having a few setbacks and sticking with a project like this, to get it right. And sort of creat something YOU think is pretty darn cool 👍

Interesting to see those flaperons in action and elevator adjustement. I use flaperons on my Discovery. Also i have Multiplex Funcub. It is very good plane. Many thanks for your videos,they are vey good.😊

I can’t agree more, this is such a great plane. Just back from the field and I’m still smiling. Flew 5 2200 packs with a mild wind. Thx for sharing, greetings from the Netherlands 🇳🇱

You forgot to mention that the nx10 has Hall effect gimbals vs the dx8g2 potentiometers.

Nice. I would love to have one of these. But, the area where I live has made anything this size Prohibited to fly. Governments at work.

Interesting hearing all the waterbirds complaining about the mosquitos there too, mate! 🤔😜😂

Gorgeous airplane! Too bad they don't make it anymore. I am rebuilding my xk version of this cub with a horizon hobby board because it flew as bad as yours did! It's a lot of work but I will love it when its finished.

This is a really good flier. I have one and I fly it really gentle, I never use full power and I fly it on 3S 2200. I fly 20 minutes and when I land it, the battery is still with 75 to 80% of power…

Does it overheat on 4s battery? I am a complete beginner and was running it on full throttle on the ground by holding it to check everything ok. Does running it on the ground by stopping it from the hands make it overheat? Will it be okay when it is flying in the air?

Well done 👍✅ looking forward to receiving mine 😊

Cool video mr. Im like you when it come to 1.2 and 1,3 . For me is about having fun and dont get broke. Kult landskap rundt der 😊

Nice looking flyin' again there, Sven! 😉 1 of these days we might put the floats on my FMS SuperEZ v4 and find a waterhole somewhere. But mostly us Old Farts are sticking to the Minis. The Old Fellah still has his heavily glued Tundras but the light littlies are more our league. 😊

Beautiful place to fly!!

I also want to change the wheels; after loosening the black screw, the silver part remains in place; Is this threaded or can you pull it off?

well that was something different my friend. love the rv7 Im going to afto set it up on floats also and see how it goes. thanks for sharing bud.👍👍👍👍👍

That sounds the prop makes is not good. Mine started making tat growling noises when I got near full throttle so I landed and stood over the tail and checked the prop by throttling it up and the prop came flying off cracking the cowl zipping by my face. I put it back on and have to mend the cowl somehow. This poor plane went from pretty to a beater after three flights. First one had my buddy maiden it for me and it was going great at the local flying field then signal loss ran it into one of the two trees in the field, and that knocked it down at the edge of the river connected to our field. Snapped the wing and tweaked it really bad at the wing joiner ruining it so I had to just glue the wing onto plane and back together where it snapped. She still flys but us a little more rougher on the eyes.