- 13
- 147 059
Project 46
เข้าร่วมเมื่อ 1 ม.ค. 2017
project46_official?igshid=ZDdkNTZiNTM=
How I replaced my winshield cowl on my e46 BMW
In this video I show you how you can easily replace the windshield cowl on an e46 BMW.
- Cowel buying link: www.schmiedmann.com/en/product/1956454-new?product=51-71-8-208-483
- Cowel buying link: www.schmiedmann.com/en/product/1956454-new?product=51-71-8-208-483
มุมมอง: 646
วีดีโอ
how to restore your seat belt button!🚨
มุมมอง 1.6K11 หลายเดือนก่อน
how to restore your seat belt button!🚨
Replacing both oxygen sensors on my BMW e46
มุมมอง 6Kปีที่แล้ว
In this video I go over all the steps needed to replace both oxygen sensors on the bmw e46 platform especially for the 316i and 318i models with the M43B19TU engine. Parts cost: BOSH O2 sensors parts n°11 78 1 247 406 and 11 78 1 739 845 60€ each incl. VAT total= aprox. 120€
Camshaft potsition sensor EASY replacement e46 BMW m43 engine (code P034)
มุมมอง 5Kปีที่แล้ว
In this video I show you how I replaced my faulty camshaft position sensor on my BMW 316i from 1999, engine code: M43B19TU If you need to get rid of a P034 engine code this is the way to do it.
How to remove soft touch coating from plastic parts HUGE TRANSFORMATION! WITH FINAL RESULTS!
มุมมอง 83Kปีที่แล้ว
In this video I show you how to restore old soft touch plastic parts by removing the coating and repainting the parts using only simple tools and products! This transformation was performed on my 1999 BMW 316i.
Installing bluetooth in my e46 BMW
มุมมอง 41Kปีที่แล้ว
The car used in this video is a 1999 BMW 316i The total cost for this project was about 58€ -Blue music bluetooth adapter: 40€ -Clips: 10€ -Trim removal tools: 8€ Blue music bluetooth adapter: www.amazon.fr/Adaptateur-musique-Bluetooth-pour-broches/dp/B08HN9STRX/ref=sr_1_2? mk_fr_FR=ÅMÅŽÕ%C 3&crid=1E6WJBQIGIH1L&keywords=bluemusic e46&qid=1676393148&sprefix=bluemusic e46,aps,71&sr=8-2 Trim remo...
Exterior detail on my BMW e46
มุมมอง 5972 ปีที่แล้ว
The car used in this video is a 1999 BMW 316i The total cost for this project was about: 132.98€ - Scratch remover: 21€ -Wax: 38€ -Microfiber towels: 15€ -Washmitt: 10€ -Drying towels: 12.99€ -Applicator pads: 20€ -Car shampoo: 13.90€ -Masking tape: 2€
How to repair e46 mirror cap with broken clips
มุมมอง 3.5K2 ปีที่แล้ว
The car used in this video is a 1999 BMW 316i This is an quick and easy tip on how to repair a e46 mirror cap with broken clips the only required tools are: - a drill - and 2 zip ties
Replacing Brake discs on my BMW e46
มุมมอง 5142 ปีที่แล้ว
The car used in this video is a 1999 BMW 316i (torque specs may differbetween different models) The total cost for this replacement was about: 65€ (without shippement) - 2 Febi Bilstein brake rotors: 56,42€ - threadlocker: 2,67€ -brake cleaner: 4,23€ -metal free lubricant: 1.31€ Before posting it in the comments I know you have to replace brake pads as well but mine have plenty of life left and...
e46 windshield washer pump replacement
มุมมอง 7052 ปีที่แล้ว
The total cost for this replacement was about: 11€ -pump 6.43€ -strainer 4.89€ prices may differ based on where you live
Project BMW e46 (316i 1999)
มุมมอง 1K2 ปีที่แล้ว
Hello viewers, Here is my first ever video. I always wanted to own a BMW and last year that dream became a reality, since then I stared at it during multiple hours and gave it much attention. I hope you like the video :) (For the US viewers the bmw e46 316i has a petrol 1.9 liter naturally aspirated engine producing aproximatively 105hp) and was sold only in Europe.
clean Work. now I know it's same like mine 😅 how much ? km/h you have on board?
I have 120 000kms on the tachometer, thank you for the compliment🙂
hy dude 😊 1 questions witch e46 you own, and if its 316i. when yes online says me i have 4 to remove but cant see it . however in 4 days i will replace it , mb you answer . peace
I have the pre facelift version of the 316i so it has the m43b19 engine wich has 2 O² sensors, the facelift variants so the ones after 2001 have the n42 engine if i'm not mistaken wich have 4 sensors, hope this helps🙂
Nice
Daha fazla video yüklemelisin. Merakla yeni e46 projelerini bekliyorum kardeşim 🇹🇷👏
How is quality on phone calls?
Hello, I have a 1999 E46. I installed everything correctly. I am connecting to the Bluetooth no problem and I can even skip songs with the arrows, but there is no sound coming from the car at all. Can you help?
Best method so far! Tried 5 or 6 different methods, this one was the best by far! Be careful to not let the product sink for more than 5min, otherwise it will turn grey/white
Hello friend, I have the n42 engine 318i e46 2002 my car drives me crazy for a misfire in cyl 3 but when I get some rpms and speed and get low the car don’t show the misfire, I checked with inpa las time and get the 2823 error oxygen sensor heater before cat but the car have 4 sensors and I can’t realize which sensor I have to replace, because this sensor may be it’s the reason of the misfire cyl 3 . Can you tell me witch sensor it’s? Thank you
Well if you do have 4 oxygen sensors, there are probably 2 sensors before the the catalytic converters and 2 after, the ones after are only there to tell if the catalytic converters are doing there job. The ones before comunicate with the ecu so if you have misfires, those could be the faulty ones I would try replacing both of the front ones🙂
@@_Project46_ thank you for the reply? You tell me that the after cat don’t cause misfire correct? That’s important, becouse 2 sensors are from the exhaust so the engine immediately cyl 1 and 4 and 2 and 3, then other sensor before cat and one after cat . In the real oem page the diagram name ones as lamba probe and other monitor oxygen so, what’s the difference and which one is the faulty? Thank you
Thank you for a very clear explanation of how to do this replacement! Bonus points for including the torque spec for the wiper arm nuts too :) This is on my list of things to do on my 2004 E46 once I've got the more important mechanical jobs out of the way. Thanks again! I assume the clips didn't come with the cowl; they're a separate part(s) right?
Hi there! Im glad you liked the video, and thank you so much for the support, I really appreciate it🙂. Actually the clips are included with the cowl as well as the rubber gromets for the wiper arms so its pretty much all ready to be mounted. I wish you good luck with your project🙂 Kind regards Project 46
I installed mine but the bluetooth keeps disconnecting. It will play the sound from my phone for a second, and then its like it restarts. Maybe a faulty module? 😢
It could certainly be a faulty module, it never happened to me before, maybe a compatibility issue with your phone?
I just soak the parts in dot3 brake fluid over night and it comes off very easily, it doesn't react with the plastic either.
I mean, if it works, it works, might be faster as well🤔
Did this today, works like a charm! For those who don't have a drill like me, some patience, a thin screwdriver, and a lighter work great! Only do a hole wide enough that the zipties can move in it freely, it's easy to burn the whole plastic off
Love you're suggestion! Thank you for sharing it with us🙂👍
So the whitte conector must be reconected in the new arnés???
The white connector is the one that goes to the cd changer so its useless🙂
I have had good results removing the sticky paint with isopropyl alcohol as well, it leaves a scratch-free surface ready for priming and painting. We used that kind of paint on equipment ment for use on a ship's bridge, but man, that became just a sticky goo after 8-10 years.. Also, for better scratch resistance, you may consider 2k paint.
Great suggestion! might be faster than the scraping technique😅
Well done and great Explanation. Thank you!
Glad it was helpful!🙂
It worked perfectly on my business CD. The name of the adapter is Bluemusic. Beware that many fake ones only use the AUX input. I live in the USA and only found it on Amazon in Germany. But it was worth it! It looks like it's OEM and it works to move forward and backward on the steering wheel controls
Very nice job,i will try it on my interior soon.thanks for tip
Glad you liked it, and good luck🙂
This is absouletly not worth the time, scraping all this shit off. just buy new or stick foil over it.
The issue with these solutions is that in both casses the finish won't be as durable as a painted surface, and they'r also more expensive but sure it could work🙂
Hi can you help me,When i press the button mod says no tape and does not switch to the changer
Must be a connection issue, does your phone connect at least?
I can connect to it and play music but I can only hear the sound from one side of the car (right side). I tested on radio and both sides are playing fine. Confirmed with the balance settings and it seems that the left side are not audible.
Well thats surprising, have you verified your phone's sound settings to verify if the sound is stereo and not mono?
moi j'ai poncé direct mais sur les baguettes de finition + le plastique du levier de vitesse. pour le petit tiroir en soft touch je vais reessayé car j'ai pas assez poncer je crois, j'ai pas obtenu l'aspect lisse.
How in the name of god do you remove that white connector?
There is a blue latch holding it in place🙂
i'm sure the e46, 325i touring i'm waiting for at the moment (i already bought 😃) will get some of this treatment. 😊
Honestly, its the biggest improvement that you can make interriorwise, it makes the interrior look like new again🙂
What were BMW thinking coating parts with goo.
Did your radio have 2 10pin connections on the bottom of the main connector?
No, I only had one white connecter for a cd player, the other one might be for navigation but i'm not sure🙂
Greetings from America. Thank you for putting this together. My Bluebox is on the way from Germany. Good tip on the female clips.
Glad it was helpful! Hope everything went/will go well🙂 Greetings from France
Hi would this work with my oem bluetooth? I have a 2006 and its has bluetooth conection for phone calls but its doesnt work for music, i wonder if both can be connected in same time
To be honest I don't really know, but I do think that the two systems are seperate units so if you have a standard buisness cd radio it could work...
I’m finding it impossible to get the harness back into the left corner. Do you have any specific advice? Did you use a tool?
I also had a very hard time getting the connector in place thats why its so important to release the white connector from the big one, I did not use any tools just persevearance. Hope this helps🙂
Bon travail et bonne accent français
Impossible pour moi de remettre le poste en place avec tout ces cables et la prise blanche est elle obligatoire detre remis en place ?
Je connais le problème, sa m'a pris beaucoup de temps pour remettre le poste en place moi aussi par contre le cable blanc qui était surement déja là c'est le cable de l'échangeur cd en option, sit tu n'as pas d'échangeur, il est inutile🙂
Shits a pain to fit the raido back in lol been trying to figure it out for the past 1hr … annoying af
Yeah I know the pain... It also took me a long time to figure it out, thats why its so important to release the cd changer cable from the connector before pushing the unit back in place🙂
What is the first wire you pulled out behind the radio do?
The first wire that I disconected was the FM radio antenna wire that goes to the rear window🙂
I have tried your approach on some test pieces of plasic and found that as the colour is black the resulting surtace shows up scratches very easily,, more so than the original soft touch - I have tried matt lacquer on top also but this doesn't improve things. How is your interior holding up?
Hi Jaap, I'm sorry that this method did not work for you, to be honest I was worying about the same thing before I did it but after thurough testing with nail scratches I did not see any visible scratches apear, to be fair I haven't tried it with any metal object but but in general the finish on my parts stayed the same ever since. Maybe its a different paint or a different type of plastic?
Great video, will be doing this on my 325ci trim!
Really glad you liked it! I wish you good luck, don't hesitate to comment how it went once your done🙂
Hi, i have problem "lean to rich sensor threshold" is it related to the oxygen sensor ?
Hi, thank you for the comment, the O2 sensor is the main component used for monitoring the engine's air fuel ratio and running conditions, if the ecu tells you the A/F ratio is to lean, it is getting that information from the pre cat o2 sensor, it might be a faulty sensor but it could also mean you have an issue with the injection system, a vacuum leak... Causing the engine to run lean.
Can u show how to fix/ instal new on beck windshild engine 😅
J'ai acheté l'adaptateur et je l'ai installé mais impossible de passer en mode CD (NO DISK), et si jamais j'insère un cd du coup c'est le cd qui est joué (je ne vois pas le bluetooth), tu sais d'où pourrait venir le problème ?
Sa dèpend si tu as une radio avec lecteur cd ou avec cassette comme moi, normalement le mode cd normal ne serviras pas pour la bluetooth, il faudrait que tu essaie d'appuyer sur "mode" plusieurs fois pour que sa affiche cd-01, si sa ne s'affiche pas sa doit être un problème de communication entre la radio et le module bluetooth🙂
Use Methylated spirits and a bit of "elbow grease" and a microfibre cloth for perfect results and avoid nasty caustic oven cleaner. Thank me later
whats the symptoms my m43b19 has random idle and stalling when going slow or braking on traffic
Well the best way to find out where the problem is would be to use an obd scaner to look for fault codes, I personally had the same symptoms with a permanent camshaft sensor code so if you don't have a scanner, replacing that sensor would be the first thing to try.
@@_Project46_ the problem is so random one day it will happen then when i restart the car its back to normal then i replaced the brake booster hose its cracked the problem went away then it came back when my mechanic scans the car no fault codes
@@mr.bricktop4894 yeah I know how it is, my problem was exacltly the same sometimes it ran perfectly fine and other times the idle would be eradic and the engine would stall...
@@_Project46_ am gonna replace the camshaft sensor and tps fist then see if it'll fix the problem
@@mr.bricktop4894 sounds like vacuum leak. Should make a smoke test
Salut, t'aurais un lien vers les outils que t'utilises et les clips de remplacement stp ?
Oui bien sur, j'ai mis les liens dans la description🙂
Tanks you so much for the video my coupe e46 has the same issue. Lov the video!!!!
Well thanks a lot for the feedback, i'm glad you liked it that much🙂 thank you so much for watching my videos, i really apreciate it🙏
hi dude, how u diagnose?
Well sometimes, I had random fault codes popping up saying there was an issue with the pre cat 0² sensor, and on top of that, a rough running engine with unstable rpm's after starting can indicate that the sensor preheater is bad. I hope this helps and I wish you good luck🙂
Salut, du coup on ne peut plus utiliser le lecteur CD une fois le récepteur bluetooth installé ?
Oui c'est le désavantage malheureusement...
Salut, merci pour le tuto, cest bien utile! Par contre, le bluetooth fonctionne (mon téléphone s'y connecte) mais quand j'appuie sur "mode" la radio affiche "No tape" as-tu une idee de ce que pourrait être le problème? D'avance, merci :)
Est ce que sa le fait encore si tu appuie plusieures fois sur mode? Si non je pense que l'adaptateur est mal branché ou défectueux, regarde bien si le petit connecteur est bien branché surtout😉
Beautiful video with clear instructions and perfect results. I love the epic music as you reveal the before and after. Thank you!🙏
Well, you just made my day🙂 i'm so happy you liked it🥲 i'm really apreciate your comment and i'm happy to hear positive feedback from my work thank you for watching my videos🙂
Yea that coating was a horrible idea. I did this to my 04 BMW, and other equipment. Rubbing alcohol did the trick.
I poured boiled water over the soft plastic from a Renault Laguna 3 center console. It didn't work. Best bet is to use acetone and a microfiber towel.
I didn't think of acetone but yeah that could work quite well i'll definitely try that next time🙂
i like it, good work.
I'm glad you liked, really apreciate your coment🙂, thank you for watching my videos... Of nee bedankt voor het kijken😉
Very nice repair. I also bought the same painting products as you did. Motip is a good company. I will try tomorrow on a Renault Laguna 3 to pour very hot water over the center console (which is full of this crap soft coating) to see if the soft coating will flake away. That car has a hopeless interior and very, very rattly.
Can't wait to hear from you if it worked with the hot water trick, keep me posted! As for the paint choice, it is indeed a good brand and I always got great results using motip. If I remember correctly, the laguna 3 has quite a lot of soft touch coating so I wish you good luck and thank you for watching my videos🙂
I don't have aux mode if i connect this cable well be appear the aux mode?
You won't have aux conectivity but you will have bluetooth🙂