วีดีโอ

Давить не надо, надо пилить легко. Как будто любимую песню поёшь

Can you post what air valve to get that will work? Thanks

I picked up one of these caddies for my dad for fathers day. I had/have some serious reservations about the quality of the hose and nozzle. I'm off to Amazon to order some parts....Pop's fuel caddy is about to get some upgrades. I appreciate the upload and the parts list!

Do you still recommend the Flo n go with all the upgrades needed?

hello, did you solve the problem?

Kane'ohe is the best. Grew up around there didn't know you could camp there like that. Gotta head back to camp in the windward rain and reconnect.

My Duramax Gas Caddy 14 gal does not have that type of cap, what would you suggest ?

Or, here me out…you could buy the upgraded version with better wheels and a 12v pump….

you just killed a big patch of grass where you filled up. LOL

I just did the hacks on mine, my new hose is such good quality it's like a gas station hose althought that adds a lot of weight to it. I also got a swivel for the tank connection end (3/4" female water hose connection to 3/4" female pipe threads) to help even more on the twisting of the hose. I don't see a difference in the threads except "water hose connection threads" has a washer in it. I hooked it up and no more leaks (for now anyway). My concern is the original valve coming out of the caddy. How would you replace or find one of those if it starts leaking? It must have a nut inside the tank that holds/seals it in. I'm afraid that one is going to start leaking then i'm screwed........there's no way to get inside that tank to put a nut on the back??? Does anyone know how replacing that shutoff valve right at the plastic tank is going to be accomplished???

Is a separate reservation required for black sand beach (time slots) if camping there?

Good hacks. I'm a Canadian and gas is super expensive here vs. you guys (our government with their high taxes🙄) so something like this makes sense when making road trips down to the good old U.S. of A 🇺🇸

Nice hacks!

Great hacks!

I have the same problem, I have replaced the oil presure swich 5 times it goes away for about 3 months but always comes back ! It only does it when the RPM drops below 500 rpms. I have also tried all the other fixes for the problem but always comes back !

Katanaboy 1000 is best

Not supposed to fill them in the bed should be on the ground

Glad I found this video…great info!

You could’ve used a 12 v rv pump to get the water onto the pads, and eliminated the 110 pump, completely eliminating the need for any 110

I found your video and ordered the parts to upgrade my fuel caddy. I installed this weekend. Took me a minute to realize the plastic collar was a hindrance around the garden hose and I removed it. But everything is so much better than the original inferior hose and nozzle they supplied. I hate smelling like gas every time I fuel my equipment. Thanks for your suggestions and parts list

I actually had a FACET Fuel-It pump before I got my Tank Caddy. Obviously, the upgrade i did was to replace the hand pump with the battery powered one. Works great.

Did you end up finding out ?

Thanks for the video and link to the parts. I have one of these tanks that I replaced the hose on and added the air valve, now the handle is leaking like yours was. I was given a 2nd tank but it's missing the hose and nozzle so I'm going to use your parts list to modify both of them. Thanks again.

Is the tank leaking gas on the ground? it sure looks like it. pressurizing a plastic tank? Plastic gets brittle as it ages. I'd be Leary about doing this.

Инструкцию то не читали???пилить нужно на себя, а не от себя..эта пила пилит по другому в отличии от стандартных ножовок..усилие делать на себя!!

Thanks for sharing; this is will be very helpful. 👍

Did you have to modify the cap that you are plugging in the ball inflator into???

I would caution using the electric pump on the shader valve where fumes live. I would either go manual there or a pump with hose away from the tank

What gas cap is on the can? Do it have an adapter on it for the pump?

Did your relearn and an hour mixed travel. Apparently good to go. Thanks, good info.

This is exactly what I was looking for . Don’t know if I can do it . Don’t have any electrical knowledge.

This is crazy. I’m going to give it a try. Several videos out there but this seems very logical. Thanks.

duramax has changed the gas cap and replaced manual vent with cheap flapper valve. I just order the old style cap from Bass Pro Shops

I have problem with my F-150 3.5

I have the same problem with my Ford F-150 3.5

Thanks for the info, quick question did the flow and go come with the air fitting for the pumps? Or is that something you have to add to it? Thanks again.

Excellent ideas!! A have a couple of questions: Do those little air pumps completely empty the portable tank of gas? Do you have any issues with gas leaking from (or at) the air inlet valve when transporting a full tank?

I have the same saw, Silky Katanaboy 650. Of course, the environmental conditions in which it is used are very different. Palm trees are clearly visible in your video, indicating a hot climate. In my case, this is the forest zone of the Northern Hemisphere, the European part of Russia. Dry hardwood logs are hard to find here. Since birch and oak, especially birch, are highly susceptible to rotting. Coniferous logs are much less hard, even when dry. Therefore, using such a saw allows me to very quickly prepare firewood for a fire, spending little time and effort. It seems to me that the long time spent cutting very dry hardwood in your case is due to slipping of the saw teeth. They do not bite into the material, but only scratch it. Therefore, wood dust is formed, and not large shavings when sawing. The position of the saw may need to be adjusted slightly with each movement to ensure better contact with the material. The speed of movement is also important; it should not be too high. In any case, this saw is the only opportunity to have a lightweight tool that you can transport yourself to cut logs up to 40 cm in diameter in the wild.

After the seeing all the problems with the duromax by septer I can see why ended up in the trash without the hose I looked at buying one but at 60.00 dollars and the amount I would use it I just left it in my shed until I moved to Drumheller Alberta and commuted to Calgary for work and found the prices for gasoline could be a large difference between the two places sometimes over 10 cents a litre that's 45 cents a imperial gallon almost 40 cents a US gallon so I filled the Flo and go as a backup without the hose and nozzle I did find a problem because my siphon pump packed it in and all I had was a peice of 1/2 irrigation pipe siphon it into my 5 gallon ¹gas can it got me to the nearest gas station also filled it up when prices were about to rise used it a few times for that reason then I parked the van for over a year now that fuel prices are about to go up by 10 to 20 cents per litre I drained it into my pt cruiser I did finally get smart cut 10 feet off the male end of a garden hose and attached it to the tank worked great and since my gas gauge does not work I put 2 gallons in my gas can and headed from east coulee 20 kilometers to Drumheller and refilled it and all my gas cans prices in Calgary are already up by 10 cents per litre so since I had a Doctor's appointment I filled while in town almost 300 dollars to fill my big cube van and all my gas cans including the duromax

The flo n go's are a good concept, terrible quality. I only ever used the stand alone pump that could syphon by squeezing. But they never lasted more than two seasons. I would pay more money for the same concept in a quality item, made of metal, and replaceable seals.

You can make your own spring rolls 1000x cheaper and tastier it’s just cabbage/carrots wrapped in rice paper. Don’t waste your money on that frozen crap.

What kind of saw did you use to cut the holes?

22:25 Where’d you get a bucket? I’m going through so many bags of these

16:57 MSG is a staple in my pantry😂 Don’t believe the hype

Farmstand Canopy amzn.to/42GiXNb

I can't wait to get my silky katanaboy 650 I ordered it to cut up free logs for my potbelly tent heater stove

Soo it was the censor?

Для сухого твёрдого дерева,у этой пилы слишком крупный зуб,так она реально пилит,это вам не трухлявую берёзу пилить.

Good upgrade. I would add, though, that the fuel thread sealant should be allowed to set for 24 hours before allowing fuel to run through the hose. I used all of your recommended products, and tested it right away, and something leaked a bit, dripping the blue sealant with it onto my driveway. That stuff isn't easy to remove (from skin either, so wear gloves when applying!) Otherwise... worked like a champ!

For Quick Hose Disconnects, Here is one with good reviews but I can't find one with an auto shutoff that is male threaded. Just remember, if you disconnect the hose, all the gas in the hose would leak out if you don't let it flow back into the tank. I would also get some gasoline resistant washers and O-Rings because fuel might eventually eat through rubber hose washers. I'm not sure what kind they come with so might as well just have some spares. Quick Hose Disconnect Adapter amzn.to/3OghgzU Gasoline Resistant Neoprene Washers amzn.to/3Hwz9He O-Ring Kit amzn.to/3S98jK6