วีดีโอ

Thank you brother now I see why warter be going under the carpet of toya floor and now I know how to clean it myself and fix it.

Great video. I replaced the digitizer today. The key things are: 10mm for the 4 bolts, you don't need to take the side brackets off, but it is easier, careful with the clips that hold the cables to the circuit board, the little doors swing open, then the ribbon comes out. Reverse slide the ribbon in, and then the little door closes snug and holds the ribbon in. Make sure you have a micro screw driver set, the screws damage easily. Take your time and take pictures of how it's set up, etc. So you can put it back together. BTW, Toyota quoted me $1000 to repair or $3000 to replace the unit. The trickiest part for me was the little ribbon doors. They break easily. I had to repair one, wasn't easy.

Need new links to buy touch screen esp for 2014 corolla

Super helpful. Thank you. Thank you. Thank you.

Thank you so much for this. My son and I was able to get this repair done in less than 30 minutes. Good as new.

Great video Does anyone has a link to purchase a touch screen

Your breakdown was more than enough for me to do it myself. $20 on Amazon for the part and 30 minutes to do it. Size 0 and 00 screwdrivers helped avoid stripped screws.

Here in 2024. Product link no longer works, but I bought the part a few months back. 100% Successful install! Thank you and make sure you read the other comments for some pro tips

Some notes from my experience: - Make sure when installing the digitizer, that the pins on the ribbon are facing DOWN towards the circuit board. The digitizer I received had a ribbon with bends in it similar to the existing one, but the bends were oriented in the opposite direction, causing me to install the digitizer backwards initially. - Be careful not to get fingerprints on the inside of the digitzer screen, or to wipe them off before installing! Installation went smoothly other than the above issues. Thank you for the great video!

Can you assist me to solve close problem on my corolla? Please write me your email address or whatsap number

I just used your video to fix my stereo. Worked perfect!! Thank you for the upload and sharing. Saved me some money brotha.

thanks just saved $300!

Tengo un corolla S ' 2014 y me fslla el touch , alguien sabe donde puedo conseguir la pantalla ( el touch ) para remplazar

Very helpful video, what's the part number for 2016 Toyota Corolla?

Thanks for the how-to. Worked perfectly for my daughters Corolla. 👍👍👍

I did the screen swap today. Took me 1 hr just because I didn't have the right screwdriver size and when reinstalling everything, I didn't tighten the 4x screws for the screen tight enough so I had to remove from call and redo. Very happy now that the touch screen is functioning

THANK YOU SO SO MUCH … followed your video and you saved me a couple 100’s

Screen black now anybody with that problem fixed it?

Did this today, got the part off of Amazon $25. When I first put it back in it didn’t turn on at all. Took it back apart, stripped one of the screws, but I didn’t put one ribbon back in correctly. Put it back in and worked perfectly! No more dead bottom half!

Anyone know where to find replacement screws for the four holding the screen in? Like others, mine are mostly stripped now.

Good explain.

Don’t like doing work on small electronics but it saves me hundreds. Will be doing it maybe this weekend

worked perfect on my 2015 Corolla LE. thanks for making the video and offering the part for sale at a reasonable price! 10

Worked for me! Thanks!

Thanks bro

I have a blue tooth module not connected after I changed the digitizer how to I clear that in a Corolla 2015 ? PLEASE HELP

I replaced mine but the problem didn't go away... now i see the line that shows it loading but it not processing anything / just gray any ideas

Great video.

I just got a new phone and needed to hit the “add” button to Bluetooth, bottom left side and couldn’t(hasn’t worked since like year 2). I called Toyota and they said it would be $4,000 to fix. I LOLED. I am so glad I found this video last night. Ordering the part today. Really hope this works or else I’m getting a new car lol

Great video solved all my problems with a $25 screen from amazon. One tip is your gonna need the smaller screwdriver set to get the screws when you get to the actual radio itself. starting with the 3 in the bottom. the screen clips can be annoying but they will come off. THANKS FOR THIS VIDEO SAVED ME SOO MUCH $$$$ I DONT HAVE.

Very helpful video. Where did you find and purchase the replacement touch screen? Thank you

Ordered the $18 replacement screen from Amazon. It came in and I tried this. Yes! Success! Took me about 30 minutes to get it done. Thank you very much for uploading this vid.

Thank you having the same problem with my 2014 Camry

thanks for making the video

I’m looking for the screen, where can I find one?

worked perfectly on my 2015 corolla s

será que se podrán cambiar las placas de radio de un toyota corolla 2014 con un 2017

Toyota radio is kinda junk!

This works, I can’t believe it. It save me a lot of money.

Seen two video guys put underneath the vechial that work too?

Great video. On my 2014 Corolla LE equipped with gps navigation and XM radio, things were a bit different. On it, there is a module (xm/gps module?) mounted to the bottom of the radio that has three short jumper cables from itself to the main radio body. If you remove it, you will discover the access cover for the front panel connection does not exist. So, don’t bother removing it and read on. You can leave the jumper cables in place as well. This radio’s marked with Toyota PN 86100-02100. To remove the front panel assembly, find 4 small phillips screws in a row along the panel bottom. Remove them. At that point, the front panel assembly is held on by just the black plastic latches. Starting at one end, lift them up while pushing the panel forward until you release the panel. As you free the panel you will find a short flat cable that connects from the panel assembly to a connector in the main radio chassis. Flip up the latch on the main radio connector to free the cable. Now, the front panel repair is same as in the video. My panel off eBay seller tom_autoparts is working perfectly.

Jervis, so I just tried this and my screen is not responding. Is it possible that I put the touch screen on upside down?

What's the size of the screen? (Inch)

This worked on my 2016 Corolla S and only took about 45 minutes! I and my bank account thank you sir!

My Corolla 2016 runs into the similar problem today, but not only the touch is not working but also the volume button as well. Is it also related to the touch screen panel or do I need to replace other part?

Will a hex/allen wrench/key work instead of using a socket wrench here? Also, what size is that tiny screwdriver?

This was very helpfull, i just change the digitizer on my toyota corolla 2015 and this video help me a lot

I do everything same like the video but when I put everything back, the screen doesn’t work. The radio sounds but but the screen looks black

I followed the video, except my radio has the satellite radio module mounted under it. It turns out that I don’t have a small access port on the bottom of my radio. So I popped the front off and just manipulated the radio with the main cable still attached. $17 for the digitizer and now my radio works like when it was new. Thanks.

Hello Sir, Thanks for this solution i want to ask , i have corolla 2013 - 2014 and sometimes when i drive the radio do restart by itself , is that problem related to the broken touch screen that i have ?