วีดีโอ

I'd like to know if yours has held up since your video. I bought the more expensive one from HF. Looks a lot like yours but blue, it's commercial-grade Earthquake XL . I mounted mine like you did on the front wall of my shop. A person should always charge the airline before dispensing hose or retracting the hose, which keeps the hose from stretching unnecessarily, and stand relatively close to the reel to pull the hose off of it, then go use it. Pulling on 40 feet of hose outside your garage will stretch and cause a lot of wear on the hose. If need be, unreel 20 feet, pull it outside, then come back and pull off another 20 feet, etc,.. I'm glad you mentioned guiding the hose back to the reel, I've seen too many guys unlock the reel and let it fly like a tape measurer.

Great idea. Thanx

Mind didn't come with attachments

Why do you talk in such a strange way?

Great video review! Btw, for anyone buying this unit, it's a compressor. It's not meant to be quiet. If you find a compressor that runs without making noise let me know.👍

Where do you get the double light socket?

Great vid

Great review. Do you use any of the nozzle attachments to inflate a car tire?

Breaks down and they don’t honor their warranty at all. They don’t even reply

Worthless two yr warranty. They say to write to their email address, but they simply don’t respond! No wonder Amazon stopped selling their products

And how to fix it. The part where it connects to the rim, mine broke.

Unreal the hose It makes it an awful lot lighter, just a thought

Isn't the metal stop on the belt sander part, supposed to be mounted on the opposite end so it stops the wood form flying off? That's what my old craftsman did anyway. That way it acts as a stop instead of just a guide. Maybe the video is just making the belt look like it's going the opposite way.🤷 Thanks!

double the speeed at just cruising levels vs walking; more than quadruple the speed if you're racing somewhere

Neat video - does the miter guide attach into place somehow? Or is it just sliding around in the groove? Can't figure out how to keep mine in place.

Tire Inflator (Affiliate links for which I may be compensated): amzn.to/3EGz1TB

Want this setup? Get it here! (Affiliate links for which I may be compensated) Amazon Hose Reel: amzn.to/3GyNMtN Harbor Freight Hose Reel: www.harborfreight.com/38-in-x-50-ft-retractable-hose-reel-93897.html Drill Template: www.etsy.com/listing/1371736968/ 1/4" NPT Fittings: amzn.to/3ClUyk6 1/4" NPT Quick Connectors: amzn.to/3VBqAiQ 3/8" inch Air Hose Barb: amzn.to/3Zawydi

TOPDON TB6000Pro (Affiliate links for which I may be compensated): amzn.to/3koV2zJ ($20 off coupon available as of 1/18/23)

Have you encountered getting a sooner ball needle stuck down in the valve??

Доброго время суток, в автомобиле заряд вашего акб 12.5в. Прибор покал 100% заряд. На самом деле 12.5в. Это 90% Выходит прибор показывает не верно?

Доброго арем

It would make a selling!

So i need to plug it into my car to use it. I wanted get one for my lawn mower but i was hoping it was something i can just keep charged up and use cordless

how fast can i go to work with longboard when my work is 4,3km from home?

Why they say air/water but no one ever talks about the water part of these hose reels

Doesn't appear to be all that accurate was showing 35.5 psi on tires inflated to 32. I need to test it some more but will probably end up returning.

Thanks for this video, very well done. Based on this video, I did purchase one of these.

Im surprised you dont have more subscribers. You're good. From the UK shag. Het some more content up mate 👌 subscribed.

Last point. The ball on the hose is to stop the winder and leave a pigtail on most hose reels you can adjust the balls position so it can't wind all the hose Up to where you can't reach it without a ladder. You can move where the ball is on the hose.

DO YOU YELL AT PEOPLE WILE YOU TALK TO THEM LIKE ITS SCRIPTED MATERIAL? Seriously, just talk to your viewers like you talking to a friend Go over the steps like your telling how you did it, you can teach that way without YELLING AT US. Go ahead and say me and my dad, He decided the best way to do this was lag into the studs, personally I would have cut out the drywall and put in 2x8 horizontal boards put the drywall back up and then drilled to bolt the plywood to the wall. Remember the wall studs are only held up with 16 penny nails And the bottom might be toenaild the top nailed down the real load is dispersed by the drywall when your pulling the hose reel off a wall. Your better off going into a ceiling joist, that joist is designed to carry load better. Also you can't be sure You hit a wall stud center, if you only catch an edge the wood can split, for this to work you have to know where the center of the stud is, 15" on center can get you in the ballpark, but its best to probe with a finnish nail on both sides of the wall stud to find the center. You must drill or you will split the wall stud. A drop celings in a garage is legal there? It should be 5/8" drywall 2 hour fire block. That would not pass code here.

ok how about jogging w/ skitching

Do you actually talk like a robot? I had a hard time watching with the sound on...

Thanks man. I commute now metro system in LA. I wake up super early to make it to the rail but no buses at that time. So I walk almost 40 minutes downhill. Long board will cut that down easily.

Do you find that pva glue creeps over time?

Is it chargeable?

What's a good option for a turbo manifold for a 2016 ND1 MX5 2L it's been very difficult to find one to build a custom kit off of. Thanks in advance

THANK YOU for being the only video I could find about this unit that actually explained how to attach it to the valve stem!! I know it's probably common sense to most people, but it wasn't in the instruction booklet and I wasn't sure. Thank you thank you!

Hose didn’t last long before developing cracks and leaks. Always had mine in the garage.

Are you kidding me? You couldn’t use your logic to figure skate boarding was faster than walking??? How the hell are you in college ? Why are you in college ??? Omg I’m terrified of americas future.

What is the brand of buffing compound and what kind is it

Do you need to keep the car engine running while inflating the tires?

Here are the buffing compounds he uses in the video The first coat: (MEGUIARS M8532 BSP "DIAMOND CUT" COMPOUND QUART) The second coat: (MEGUIARS M20532 ULTRA FINISHING POLISH - 32 OZ)

Nice video. I have the one from Harbor Freight. I like everything about it except the swivel joint seal at the air inlet. It's not a well machined part which causes the O-ring to fail often and requires disassembly for replacement. When I forget to valve off the reel, I find the next day that my large storage tank is empty and have to have the 6hp compressor pump it up again. I'm looking for a higher quality reel.

te a quedado sorprendentemente genial

it does not last

What happens if you accidentally drop the hose while feeding it back in probably goes whipping around? Which is not a problem unless it's near your cars.

A drill hole template are you serious? If you need a template to mount this thing, then you shouldn’t be using an air hose lol.

Those blue connectors are for 12v not suitable/safe for mains power.

I’m currently in the process of going turbo on my 1990 and have been following your build series 👍 You do an excellent job at explaining and I love the improvement on the recent videos! Recently bought a speedyefi and have been street tuning while NA.

It doesn’t have a home plug to use at home