- 4
- 93 626
Adventures of Andrew & Meatball
เข้าร่วมเมื่อ 11 ต.ค. 2013
I'm a bit of an eclectic! From mountain biking, to brewing beer, to working on the car, and everything in between, my goal is to give friends and family videos to enjoy as well as helping people develop and explore new hobbies!
How to Brew Beer | Mexican Lager | All Grain | Brew in a Bag | Beginner Details Included
I take a deep dive talking about my process of brewing beer and why I do things the way that I do them! Brew in a bag is not nearly as intimidating as it sounds compared to extract brewing. Hope you enjoy!
RECIPE:
Water: Distilled + 0.65 g Baking soda + 0.2 g Gypsum + 0.5 g CaCl2 + 0.5 g Epsom salt
Grain: 5 lbs Pilsner malt + 3.5 lbs Marris otter + 2 lbs Flaked Corn
Hops: 1 oz Motueka @ 60 min + 1 oz Motueka @ 5 min
Yeast: 2 Sachets of SafLager S-23
Extra: 1 Whirlfloc tablet
RECIPE:
Water: Distilled + 0.65 g Baking soda + 0.2 g Gypsum + 0.5 g CaCl2 + 0.5 g Epsom salt
Grain: 5 lbs Pilsner malt + 3.5 lbs Marris otter + 2 lbs Flaked Corn
Hops: 1 oz Motueka @ 60 min + 1 oz Motueka @ 5 min
Yeast: 2 Sachets of SafLager S-23
Extra: 1 Whirlfloc tablet
มุมมอง: 1 715
วีดีโอ
2018+ Kawasaki Ninja 400 Swingarm Spool Installation with Front & Rear Stand Assembly
มุมมอง 2.8Kปีที่แล้ว
In this video, I show how to install spools on the swingarm of a Kawasaki Ninja 400 so you can use a rear stand! This is an important upgrade for any motorcyclist so you can clean your chain quicker, remove the wheels, and store the bike off the ground! Enjoy and feel free to comment with tips and questions! Swingarm Spools: www.amazon.com/dp/B0B5KQ6T76?psc=1&ref=ppx_yo2ov_dt_b_product_details ...
2011-2016 Hyundai Elantra Front Side Marker Light Replacement | Beginner Friendly!
มุมมอง 16Kปีที่แล้ว
Watch as I replace my front side markers with bright new LED bulbs! See the dramatic difference when I light them up at the end of the video! Link to Amazon: www.amazon.com/dp/B072JLWGQX?ref=nb_sb_ss_w_as-reorder-t1_ypp_rep_k0_1_7&=&crid=362XOAB1US64K&sprefix=168+led&th=1
2011-2016 Hyundai Elantra Headlight Replacement | Beginner Friendly!
มุมมอง 73Kปีที่แล้ว
I'm replacing both my halogen low beam headlights with LEDs. They turned out great and light up the road much better! I recommend keeping the old bulb that still works just in case you need a temporary fix for a future burnt out bulb! Product Link: www.amazon.com/forenner-H11-Brightness-H9-Installation/dp/B0BBW5F5KC/ref=sr_1_1_sspa?crid=1MZIWIDGCIXPK&keywords=H11 led headlight&qid=1674513237&s=...
Just installed mine but my plate doesn't fit to the head as the lamp is to large. Could you send the link to where you got your LED lamp? Also, is it safe to drive with the cap off. I'm using it without the cap off until I get a smaller LED lamp
@rumekpadamrophe912 You definitely want the plastic plate in place to prevent debris from getting inside. I would look for a low profile LED light. The ones I got are low profile and don't contact the plate.
@@andrewandmeatball Thanks
Hb3
Thanks...perfect description of how to do it!
Ok can i use them for my 2017 Hyundai Elantra se and how long do they last
I don't see a link to follow your videos. But this is the easiest clearest information I found on TH-cam of how to replace a blown headlight
pretty crappy vid, didnt show him actually taking headlite out & putting it back in, the headlite was already loose when he took it out, & installed when putting it in, its alot harder than this vid is showing.....
Would sylvania zevo cause hyper flash for that model car ?
love the tutorial. very detailed and informative. everything was explained precisely. keep it up! please post more elantra modification videos!
very well explained. thanks
Thank you!
Hi, are H11 LED bulbs only compatible with OEM assemblies or will they fit aftermarket assemblies too? Need to replace them entirely, but wanted to upgrade to LED. This is a great video to help me change them myself.
I was successful at completing the same swap of bulbs on my 2011 Elantra, using this video as a guide. Thanks!
Great video! One thing: at 10:24 clean gloves don’t matter if the bulb is burnt out already 😆
I found this video very helpful. Thanks for the information.
Great tutorial! So easy to understand. Followed step by step and was done in 30 minutes! Thank you!
Completely relevant and spot on instructions, keep it up. Thx
Crazy the easy and smooth teaching video to go through replacing your lights . Big thanks to
Will this work on a 2016 SE? I’ve heard that I’ll need a load equalizer since factory came with halogen
@NoodLe-cf1wo I believe it depends on the LED bulbs that you get. The bulbs I used come with that tech built in to prevent flickering.
Very good video thank you
What about the steam light around .
@@eddoll216 the glowing white strip lights up when the headlight is on. It doesn't have its own light source. Good question!
Really an excellent video, very well done and very well explained, thank you very much!
Really an excellent video, very well done and very well explained, thank you very much!
A-1 , very well done . Excellent video
This is an EXCELLENT video ! Very well done . Much appreciated.
Why mine is h7
Cheers was not sure of the O ring placement on my set of bobbins- cheers i guess correct checked later lol.
I tried putting it back apparently I have a small gap on the bottom I’ve done it before and it went back and perfectly, but when I changed the lights and decided to put it back but it didn’t go back in fully
I'm choosing to BLIND people by "upgrading" to the bluest light available at specs that any sane municipality would make illegal... Anything above 4500k should be illegal and really anything above 4000k. It's not the lumens that hurts peoples eyes most of the time it's the temperature... Other than that great video...
Thank you so much sir.
Pregunta..en este video usted solo cambia las luces de alta H11..las de baja H7 se pueden cambiar también?..Gracias por sus videos
Great instructional vid. Thank you!
Are those led lights polarity sensitive? Some don't work,but when turned around it does. 🤔
I don't believe so. The plug is shaped in a way that you physically cannot plug it in backwards.
@@andrewandmeatball yes, LEDs are always polarity sensitive.
Can the fog lamp be changed to led??
Yes, if your car trim comes equipped with fog lights
Excellent - very detailed. I was looking for something that would provide a novice like me proper level of details. Thank you very much!!
New LED'S are game changer, but they are loud!
Yes, after a while I noticed the hum in mine are getting a little louder. I only notice if I'm not driving or listening to music for now...
Would you follow this same method if buying new headlights on eBay and replacing them?
Yup, you could follow the steps and replace just the bulbs or you could just unplug the assembly and replace the whole thing with these steps and tools. Thanks for watching!
@@andrewandmeatball Thanks so much, great video by the way!
Classic brewing. Well done.
Thanks for watching!
Where did you buy your headlights
Amazon
One of the best and thorough auto DIY I've ever view. I hope you are, if not, consider teaching at an automotive school. Was able to replace my low beam driver side bulb in less than an hour on my 2016 Elantra. Thanks for your help!
Thanks man really helpful
Great video. thanks for putting in the bulb model #'s. Nice bike also!
Excellent video, especially for the beginner. You’re right, the BIAB method is a super easy and clean method for brewing beer. I wouldn’t even try to brew an all grain recipe without a bag. So how did your Mexican Lager turn out? Were you happy with it?
I ended up using more Maris Otter than I should've so it ended up tasting more like a German Festbier but it was still a good easy drinking beer! Thanks for watching!
Good job
Thanks
Best video ever! very informative!!
Steering bearing maintenece is expensive to keep those bearings greesed, the Abba stand is what i've seen to work best on kawasaki, it lifts the bike from the center frame making it easy to work on your tripple tree.
This is incredible. Thank you so much for sharing.
Happy to help! Thanks for watching!
Does that white thing light up, I´ve seen some that the white part lights up
It lights up because light shines through it, but there's no bulb or LED strip that powers it. Thanks for watching!
Why I have bulbs 9005HB3 in my Elantra 2014 limited ??
Someone before you might have installed incorrect bulbs
My car burns through bulbs a lot, and my mechanic told me these Elantras do that. I want brighter, longer lasting bulbs, but I don't want to blind people like I've been blinded by some cars and especially trucks. Can anyone recommend any brands of LEDs that have worked well ? Not ready to spend $100. A pair of Sylvania H11 SilverStar: Halogens are about $50 USD at Advanced Auto. Thanks !!
Speaking from experience, the LEDs that I installed in this video almost a year ago are still going strong without issue. They also level off (if you're not using your brights) to avoid shining too high and blinding oncoming traffic. Thanks for watching!
These Elantra headlights distribute the light throughout the headlight so as not to dazzle. Older cars do get stuck because their headlights are not designed for that function and the light comes directly out.