วีดีโอ

Thank you so much

Hi Gary! I don’t know the actual setting as I am out of the shop on vacation however using the compression fitting for the spindle I adjust it down so that the bristles are in contact with my work piece and tighten the bolts. There is more than enough “float” that way to make proper contact. Is this what you are asking?

@@the_crafty_studio_official Yes, it was that. I've got my spindle set all the way up in the compression fitting and still have a gap to the work surface with most bits. Thank you for the quick reply, and for the video!

@@garypetersen you can lower it. DM me on my Instagram w a photo

I can promise you that all that mess is real. If I were to edit it would be clean. 😂

I am happy with it. I do not use lasers in my workflow very often so I’m still learning so it’s hard for me to judge speed. That being said it is very easy to use and I find the learning curve to be very manageable. I haven’t tried to cut with it yet but have been using it mainly for logo burning and etching and it is a solid performer.

Yes that will work as well but depending on the depth of your pour the exothermic reaction it could fail

Hi Tom! Linear foot pricing of which part the resin topcoating?

Sure, or the whole thing.

It’s poured at 1 oz per square foot and then spread thin w a shower squeegee

My website moved. I’m sorry need to update the link www.thecraftystudio.org

Yeah it wasn’t a planned day…I can assure you that 😂

Thank you so much

Hi. Yeah my website has been problematic. I am rolling out a new one www.thecraftystudio.org. Let me know if you have any problems

My wife wouldn’t allow me to take out a home loan…I sold one of my kids…no I didn’t…🤔

Thank you it’s one of my favorites

StoneCoat Countertops Quick Coat Epoxy

@@the_crafty_studio_official Thanks!

Hi David! Thanks for asking. The design had a lot of cross hatching and was running at 200 inches per minute. As I remember it was a 5 hour burn give or take.

Hi Victor. I have the 25/50 super max mounted on it.

Thank you for asking

@@the_crafty_studio_official so a 19-38 should fit perfectly on it too

@@the_crafty_studio_officialim trying to buy the plans from your website but can’t seem to find them

Thank you for joining me. We will be doing more of these as part of our normal content plan. 🤘🏻

Funny, I didn’t realize that you were such an expert in washed-up looks! Got a mirror handy?

Hi! Thanks for asking. Which bits and what are you carving?

It seems this guy does not want to share this information. Someone else asked the same question and has received no response also. Kinda annoying that he makes money off of our watching his “informative” videos but doesn’t share information which would help us get up to speed on our own similar projects without toasting a bunch of bits/cash.

Well since speed and feed depends on the material and bit size so I’ll ask again. What material and bit size so I can answer your question

Hey Mike. Not at all. Great question and thanks for asking. Resin acts as a glue and has more than enough holding power therefore bow ties are not necessary. When you purchase from StoneCoat Countertops Epoxy use my discount code thecraftyweiner for 10% off your purchase and reach out with any questions. 🤘🏻

What sort of fun video would that be? Of course I covered it.

Isn’t that all part of the fun? 🤩

I’ve never done a comparison w a stop watch 🤔 Maybe I should?!?

Interestingly enough, editing isn’t even in my numbers. That is an in between admin function that just keeps me from my tools in general. All that though, I love what I do!

Oh I get it…that being said when working on CAD for my CNC it’s just easier to use calipers and add two numbers. 🫣🤣

I do. Let me check the website. I am sorry for the inconvenience.

Now that’s a glass half full view of life. 🤘🏻🤣 Love This!

I was showcasing my ADD but it seems you’re showcasing your PhD in pettiness. Stay amazing! 🤟🏻

Thank you so much. It’s a design toss up. Some people like to see the rings on the ends. Thank you for sharing your perspective and yeah check them out. Wonderful organization 🤘🏻

🤟🏻

I haven’t had that experience. DM me some photos so I can see what challenge you are sharing.

@@the_crafty_studio_official I'm using the Kreg PRS 2100 table and after taking advantage of the table’s asymmetry, I’m able to get 4” of the 6” possible fence travel. The last paragraph on page 1 of the instructions calls attention to the need for a “shop-built table extension must be added to the back of the typical table” to get the full 6” of fence travel. What model # is your Kreg table?

Thats the point…my brain calculated 7’0” as 70 inches.

I wish I had been drinking before. The mistake would’ve made more sense. 🤣

Oh man if they were only a thing lol

thats the point…I did…my brain saw 7’0” as 70 inches.

That’s a perfectly good word for the kerfuffle

It was a charity based project and I considered that but ended up going w breadboard ends. Gave me an excuse to learn how to do them. You can see the whole project here: th-cam.com/video/AtzfU21_4Ic/w-d-xo.htmlsi=S7IYWNffq_BabPiQ

That’s awesome! I gave it away as a gift to a disabled veteran as part of a charity build. 🤟🏻