- 13
- 236 427
TUKZAR AUTO
เข้าร่วมเมื่อ 10 ธ.ค. 2015
At TUKZAR AUTO we understand how frustrating it can be when you breakdown by the side of the road: it always seems to come when you’re least expecting it. help with a smile is a phone call away so give us a call, bring your vehicle and let us help.
It starts with a personalized preventive maintenance program customized to the needs of your vehicle and continues through every service we perform. From regular maintenance and checkups to major engine, brake, transmission and system repairs.
Best of all, our diagnostic approach to repair means that we only do the work that your car actually needs. Providing quality service like this at affordable prices keeps our customers coming back.
Note: Videos in our channel is for information purposes only, you are welcome to use the information to repair your vehicle but we do not take responsibility if our method of repair does not work for you.
It starts with a personalized preventive maintenance program customized to the needs of your vehicle and continues through every service we perform. From regular maintenance and checkups to major engine, brake, transmission and system repairs.
Best of all, our diagnostic approach to repair means that we only do the work that your car actually needs. Providing quality service like this at affordable prices keeps our customers coming back.
Note: Videos in our channel is for information purposes only, you are welcome to use the information to repair your vehicle but we do not take responsibility if our method of repair does not work for you.
วีดีโอ
Ford Mondeo Door Lock Replacement
มุมมอง 1.3K2 ปีที่แล้ว
Replacement of Door lock mechanism on Ford Mondeo MA MB & MC,
Mazda CX-5 engine light, traction control and TPMS lights on
มุมมอง 21K2 ปีที่แล้ว
Mazda cx-5 2013, engine light was on, traction control light was on and tyre pressure monitoring system was on, the coses would not clear and the transmission would kick in every gear without eniugj power to pull.
Ford Mondeo Key fob Programed
มุมมอง 7K2 ปีที่แล้ว
To program a remote to your ford Mondeo mk 4, Close the doors. Put the key in the ignition Turn the ignition on and off 4 times you will hear a beep. Push any button on the fob you wish to program to the vehicle. DONT REMOVE THE KEY FROM THE IGNITION YET. Turn the ignition on and off for the fifth time. Remove the key. Congratulations, you have just programmed a remote to your Mondeo.
Renault Koleos 2008-2013 service light reset
มุมมอง 1.5K3 ปีที่แล้ว
Renault Koleos 2008-2013 service light reset
Renault Kangoo 2011 clock adjustment
มุมมอง 73K5 ปีที่แล้ว
The aim of this video is to guide you through to setting up your time or clock on centre display panel on your Renault kangoo 2011 turbo diesel.
Ford falcon BA BF starter motor changed.
มุมมอง 45K6 ปีที่แล้ว
This process applies to all Ford falcon, fairmont and fairlane BA and BF non turbo versions.
Volvo XC90, 3.2Ltr alternator changed
มุมมอง 11K7 ปีที่แล้ว
I did this video for a friend and that’s why I haven’t put too much information, and now I thought I should be sharing it with everyone so that others may benefit from it as well.
Ford falcon BA and BF front engine mounts
มุมมอง 14K7 ปีที่แล้ว
I changed the front engine mounts on my falcon BF, same procedure applies to BA, BF and FG including territory SY and SX. This video is for educational purposes only and am
how to remove the 3rd row seats on Volvo XC90
มุมมอง 25K7 ปีที่แล้ว
a comprehensive step by step guide to removing the 3rd row seats on Volvo XC90.
Pcm fault code ? P2263 ?
Awesome video - thanks! I am stuck on the part at 0:41sec into the video that tells about the cover behind the 3rd raw seats that needs to be removed. I can't see those 8mm bolts. How do you access them? Thank you!
These photos were taken years ago, if I remember correctly, you will need to use a 3/8 socket set to access some of these hidden bolts, 3/4 or 2/4 sockets are too big to fit. Pull the edge of the The cover a little from each corner to access the 8mm bolts.
Thanks a lot, I see it now. This is SUPER helpful video!!
Ford mondeo 2008, doesn't work unfortunately. No peep noice comes after 4x turn I to II. Any tips?
I have the same issue, I have a 2007 keyless. Have you solved it?
@@Salpeteroxid yes, honestly I don't know how. I did this routine several times and tried some tips like "closing the doors" and "fasting seat belt" before trying it and after several tries and a lot of times on the same day finally it worked. I did it also more than 4 times in some tries. And also in different speed while turning key from I to II. That's all i can tell you, hope you'll succeed
@@yiddem2848Infuriating to say the least. First I couldn't lock the car. Then I wanted to remove the minus pole to reset the fault codes, has a small spark. After I removed the battery I had immobilizer come on. Managed to reset that by improving the ground and here I am. Just before winter (in Sweden) and having a car I need to unlock with a key. 😢
Just had alternator go yesterday .That lock tight idea for center screw is more than likely helpful . That collar belt trips up people . Bad alternator or loose center bolt ? Leading to the engine ?
What kind of stereo do you have?
its an aftermarket head unit, you can purchase from ebay and any electrician can install it for you
Thank you! I had no idea what those buttons were for and I needed to change the language.
My mazda is doing the same thing also same codes,I change that part and still has the same problem
Yes it helps thanks
hi, i’ve got a renault kangoo 2011 as well but when i go into system settings, i don’t get an option for “clock”. only two options i get is “language” and “default settings”? if you’d kindly help than that would be appreciated although you posted this video a while ago so not sure if you’ll reply but if you could than that would be greatly appreciated
Are you serious a brick
hello, what error codes do you have on that problem?thank you
Was it P2263??
no, it was U codes 0401 and 0442
then you will need to carry out DPF regeneration and clear the codes after
I am having the same lights come on my 2016 Mazda CX-5 but mine is not diesel. Anyone know if changing this sensor will help my car?
I am having the same lights come on my 2016 Mazda CX-5 but mine is not diesel. Anyone know if changing this sensor will help my car?
Hi, have you managed to sort it out
my car had this exact issue, all lights on dash, harsh transmission shift, no a/c, this one $50 exhaust pressure sensor part fixed it all! thankyou so so much!
Worked great thanks
I have the same problem with 2012 cx5 2.0 gasoline, is it the same thing that i need to replace?
Most of these instructions say to insert the drivers seatbelt as well as doors close. was your seatbelt on? I have a vehicle that the seatbelt doesnt work (something lodged) and I couldnt get my new remote to program. confirmed freq and functionality w my keytool.
I can confirm that the seat belt did not need to be out in
Hello sir ,, i have mazda cx5 2014 with the seem dtc u0401 ,with all lights on dash ,,,, should check the map sensor
I have same problem idont how to fix
Thanks for sharing 👍
2004 GTO
Good video, where can one buy this updated exhaust pressure sensor? Part number? Improved over the original plastic oem part?
Thank you, the programming has been completed
could you do it without removing trim?
Great great info 👍🏿
Thanks for this!
Hello..i am experiencing exact same with my Mazda 6 2014..got the throttlr body cleaned and MAF sensor changed..but the problem still exists..can you pls advise what is the possible fix for this
My 2015 was Doing the exact same thing. We checked for the code that it through and it was P0303 which was a misfire and it ended up to be one of the four coil thingies that are by the fuses. If you need to know the name I can ask my husband
got to do it soon 🔜
Need to slow it down a little
I dont have the reset button or the navigation buttons!!
Sweet as !
Thank you 5:58
lifesaver
Wow! Thanks a lot for sharing. I am changing my entire interior and I got stuck with the 3rd roll seats. This is extremely helpful.
At the slide of 0:11 there is a circle where a ring is. I cannot find a bolt or screw to unlock there... Does anybody know how to remove it?
Use a screwdriver to pull out the back of the hook plate. There is a tiny gap at to top
What about the chip.my remote works but won't start the engine
The chip needs to be programmed with a special tool, normally the locksmiths that can duplicate keys can help you with that.
Question...if you had used the extension lead which I presume comes with the kit and not plugged in the original lead, would the new exhaust pressure regulator have worked straight away? Have a 2015 cx5 and have exactly the same lights coming on
I don’t believe if it would, I didn’t have the extension lead connected at first, the wiring diagram on the connection from the original wiring harness is different to the extension which is supplied with the pressure regulator. You need to connect the extension lead. Hope it helps
Did this help? My 2015 just did this this morning and I’m praying it’s not some expensive fix, Lord knows I cannot afford it. Please help me understand what this means 🙏🏼
@@tukzarauto6227 please see above question 🙏🏼
Any suggestions for Ford Mondeo mk4 but with the start button because no place to insert the key?
According to another mechanic, the process is the same. With push start vehicle, you would push the start button twice to turn the ignition on and once to turn the ignition off, repeat this 4 times as per normal. Make sure that you are not depressing the brake paddle when trying to turn the ignition on.
Chur bro doing one today bloody good advice easy to follow just a bugger trying to get the top bolt off Beauty
Hi, getting a message on CX-5 -2015 2.2 “vehicle system inspection required”OBD reader error code U0235. Any help what could that be? Thanks
do you put the key you wish to programme into the ignition or do you put in the original key that came with the car when new ?
If you are programming a remote control, it doesn’t matter which key you use.
… thank you for having the zeal to have shared this… on the way home in the middle of no where and this happened to a 2014 CX-5…stopped… took out the iPad and googled… your video come up… and you described the issue to the point… and the fix… the stress from worry of the potential financial expense was put away… and all that it has left me with is the pleasure of having the knowledge of the problem and the simple fix to what seemed a big problem. Thanks again.
Thank you for the comment and we are glad to hear that our video has been helpful to you.
I used a 3/8" ratchet with 13mm socket and got top bolt off. It's tricky but it can be done
2016 cx-5 has this issue too. 4WD light on as well indicating the AWD is not working. 113k km, piece of junk if you ask me. Nothing but problems after 5 yr warrantee.. this is not cool when you are driving on the highway.
… just happened to me last night on the highway too in a 2014 CX-5 Sport FWD with 278,000 miles just after midnight 90 miles away from home and any help… stopped and googled and watched this… how relieving because, here was a diagnosis to what seemed a big problem and the worry of the financial expense was allayed. He discribed the issue exactly… very grateful for his generosity to share, without which, presenting the car to a technician would leave me to his whim if he is not a morally imbued person.
@@mounbakko5871 did it fix it? What he describes here?
@@angelbelieves7496 no., it did not… for one, the location of his MAF and mine turned out to be different… was finally able to identify where mine was and cleaned it… second, my symptoms were even of a more severe nature than just the MAF which I was able to identify and fix. It should be stated that his posting that video is commendable just for finding the time to do it and secondly it spurred me on to discover what my exact issues were… which I did myself… spark plugs and ignition coil… a $700 + job at a shop... also identified and cleaned the MAP… all the knowledge acquired was priceless and the savings, immense on top of $69 for a set of tools… ratchet wrench set. When you go to the shop without knowledge, you are bound to be fodder… there is no escaping it. Things that should cost little , balloon to exorbitant levels… what is the cost of four spark plugs, even at your local auto parts store? How long does it take to take them out and put in new ones? What is the labour charge? This is where the dishonesty takes hold with costs exceeding $700. Will be glad to share more with you f needed. Be informed.
Legend! thanks mate
Great tutorial. Thank you
Mine have all come on aswell. I think I'll do this as well thanks for the video .Top Man
Did you fix it? If so was it what he said?
Thank you
Hi. Thanks for that. Would you know how I can fit my new gear stick gaiter on my 2013 Kangoo. I am struggling to remove the gear stick knob. Thanks in advance if you can.
Where you able to put it back in place afterwards
Of course, it may look difficult but I guarantee one of the two things will happen when you finish the job, 1- you will say it was very easy 2- you will be glad you never have to do it again. If you are anything like me, you will look forward to next time. Hope it answered your question.