วีดีโอ

What about the crank shaft the keeper should be faced noon up i also had to replace right cylinder head so I put everything back on and worry were to set the crank shaft

Awesome bro Where did u get the longer bolt for the rail

That mustang is still da shit 😎

What happened to the video between this one and the head install where you install the cams?

I did exactly the same job on my engine my only error was using the same timing chains I replace tensioners and guides and when I put everything back together I had a rattling chain sound do u think that it can be that my timing chains stretch ? Or can it be my oil pump ? I would really appreciate your respond thank u

Great video

im painting my chin spoiler I cant wait!!! I have a tropic green 03 v6 :)

How do you know when it's top dead center?If the cylinder comes up twice once for the compression and one forful exhaust, how do you tell the difference?Help me please

Great video

Good vid man.

Really appreciate this video. Perfectly explained process. Thank you

It takes 16 full complete rotations for the timing DOT and Timing Link to match up again..... After doing these over the past 20 years, I've learned this....

Thank you so much. I’m about to do timing chain on my 2000 crown Vic this weekend and this video helped me out so much! I’ll be back with an update when it’s finished.. Thank you 😎

I watched a handfull of other videos, But nothing made it seem so easy and make me confident in working on this, im so happy I found this video. And the camera perspective is helpful, but i got really motion sick watching

I need this

I need yo change my valve seals and don't want to remove heads,I'm worried about removing the cam,any videos?

Not liking this kit anymore after seeing how you dealt with the harness.

How do you know if you not up on compression or exhaust on the pistol the number one?

Can I just slap the timing chain on or do you have to time it and is it as simple as bolt ons

I love girls

What do you think about this a decade later OP?

Late comment but are you running 18x10 all around

I’ve been searching high and low for this exact information !! I’m glad I came across your video before selling my left arm for a mechanic to time mine for me

Gay

Who built the block?

Who built your short block

Someone plz help, i need to do the timing chain on my 4.6 2v f150, its rattling, and its either a broken chain guide or a rocker arm, anyways, how do u get the mark to point at 6 o clock if motor is still in my truck?

Hey i was replacing a 97 lincoln ford 4.6l 2v v8 head gasket and when i set the crankshaft to top dead cent the cams where totally off but my engine ran smooth its weird , while the heads were off i forgot to turn the cams into the timing position and bolted them onto the heads and now when i try to turn cams to the timing position i can feel valves hitting pistons, do i gotta take the heads back off ?

You know ...I have built many older V8 engines that ran forever with out dam cam chains ..internal camshaft ..did they run any better. .hell yes....so much for progress !!! 🤣🤣

Did you use cam holders ?

I wonder if that’s the same motor as my 2003 F150 4.6 ?? I also bought the Ford timing chain kit Also why the other bolts -ARP ?? Thanks great video

Thanks for the video is good information

Hello I have 2 questions for the timing cover how many lbs of torque you put it; and if you bleed your lifters before put them. Thank you very much for your help.

Thanks for the video it halp me

Great video.very simple, straight to the point, yet accurate and complete. Thank you!! 🤟

You didn’t show shit

hey man great video - I'm about to do this job for the first time on my 2011 Crown Vic Police Interceptor. I watched a ton of videos and many say once you lock the cams with the cam locking tool to not rotate them again with the chain off, or it could mess up the timing. but then most videos end up rotating them slightly with the tool off, to line up the chain properly? little confused by this

I was worried about number one being at TDC before I take it all apart. I did the screw driver trick and ended up with a bent screwdriver. I don’t have the heads off yet. Hopefully I don’t have a ruined piston too.

Just finished a timing job on my 4.6 and didn't know that the timing marks on the chains won't line up with the dots on the gears after rotating the engine and was starting to worry that I did something wrong! Thanks for the video telling me about that they will only line up when you first put them on. After rotating the engine twice all three timing marks lined up like they should. Thanks for the video great job!

You got insta bro????

I changed my mind ima keep mine 2000 v6 manual

Hi my name is Sammy b I'm putting a oil pump on my 2004 gt mustang. Turning my crank to top dead center my chain doesn't line up with my cam dots it's one whole tooth off.when I put it back together do I set it with the marks on the chain and the cam dots .

Which chain tensioner guide goes on which side. They are different.

But you did not have it balanced and blue printed

❤

Thanks dude, you make it look easy!

Great job and explanation this is the type of video walkthroughs we need 👏👏👏

Great video. You answered the question I had. I was concerned that after I rotated the motor the timing marks and chain links didn’t line back up. Yours was the only video that indicated that wasn’t a concern. Great job, thanks a lot

Pinché takuache

How do you like the coilovers?