วีดีโอ

What is a head blot? What size werench do I need?

I have a 2015 F150 5.0 and I can feel the clicking coming from the black piece right above the throttle body without taking the intake off. And I took the intake off and it is black all over (carbon), so I’ll clean mine and or replace it with a better one

Holy fuck you are long winded ...get to the point

Thank you for the video!! Has anyone found a fix for this?

I don't believe that is the cause of the ticking noise prevalent in this engine. That throttle tick is also a problem with the 5.0 and we clean the throttle body or replace it and re-initialize the computer and it takes care of that problem. It's caused by an error in the Idle control from the throttle plate not sitting correctly. The typewriter tap is different and comes from the valve train, probably caused by a design flaw in the oil passages and improper oil flow through the valve train. that's why it sounds like it's coming from the back of the engine.

You are a life saver thank you

Throttle body reset should fix the tick. Let engine completely cool first. Remove neg battery cable. Jump positive to disconnected negative cable for a minute or so. Drain all the capacitors to reset memory values to zero. Reconnect neg cable. Turn key to on, wait for gauge check to complete. Then start and let idle from cold to hot before driving.

Is the speedo gps?

Thank you for this. Took my truck to the dealer and they tried to tell me it was a l valve tick and that it lowered the value of my truck by like 5k

That’s just stupid cutting the trunk like that’s a sign of a lazy mechanic

How loud is it from underneath?

Great video! Comforting to know that it’s not a big issue….discomforting to know about the toy coolant hoses!🙄

Putting a new throttle body on will not fix this. It is a motor driven plate with redundancy with two position sensors any small readings between both position sensors will turn the wrench light on and kill the throttle nothing off closed throttle. So the throttle plate movement exclusively controlled by the PCM with inputs from the throttle pedal and checked 0% input and the plate clicks. This is a strategy in the PCM why? only the engineers know. Stop worrying it is normal. Yeah annoying like the coyote ticky rattle OH MY GOD my engine is going to blow up thrashed on it the last 7 years 110k now still has a ticky rattle not louder. Love this engine came from a 5.4 3v spicy for its day and lasted still going for my son it was overserviced.

While I have a 2017 doing the same thing and as a mechanic I see things that dont make sense the engineers do their job making no sense to us mechanics but it works. And on a 2nd gen coyote the last of the good ones it idles like silk and zero drivability problems. I think seeing other people seeing the same thing for all intents and purposes it is normal like the ticky rattle the coyote has. Why it does that only the engineers know.

Did this ticking increase a d decrease with acceleration but stop entirely just before 2000 rpm ?

Mine does the same thing, i was told if i pulled it apart and cleaned it... Might help. Never did 😅

I have the same exact sound! Also no driveability issues but when I took my truck to the dealer they said I’ll need a new engine block for $5,000 😂 So glad I didn’t go with that.

A lot of the trucks made in dearborn, MI have been having VVT issues. I got 120K on my 2016 5.0L and they are starting to act up

Hoping to do this to mine tomorrow. It’s 2014 so I should be good wish me luck thanks for your help compadre !

Yes! Thanks for posting this video. I cleaned my throttle body and it started making this noise. So I took the battery terminal off to clear the memory and then restored power. I turned the key to the on position to let the throttle body sweep. Then I started my truck and let it idle for 30 minutes and it relearned the idle setting and the noise went away! Thanks again!

Dude, hell yes! I just fixed my microwave by watching this video!!!

I got one for my 72 f-100, I'm not looking forward to installing it 😢 so far there are no videos on how to do a 72.

Do they come in a purple color?

Send a bunch of millenials to school give them a lap top , supervised by a man bun and tell them they are a mechanic, ooops sorry technician , mechanics know how to fix things with a computer

LMFAO! WTF!

Thanks for this video! Had the same issue. Excellent insight on the center switch...I glued a small piece of plastic to the lower door latch to properly engage the center switch button...problem solved!

Too much plastic louvres

Simple way to screw you so only Ford can fix it at a huge price

Is the 'fix' to just get a new throttle body or can you clean it or something else? 2016 V8 F150. Mine just starting with this ticking.

those this apply for a ford mustang gt cuz its the same engine and i have a tick

Thank you for this video! We have the same microwave and it’s doing the exact same thing. I try to fix stuff around the house myself to try and save a buck, but I know nothing about microwaves. This video gives me a great place to start, and hopefully resolve this issue.

He doesn't show how he took it out!!!

Every ford I have ever owned had ticking noise.

I could not get the screen filter in there. The hole was way too small! Anyone else? I changed my sender and it was good for about 5 days then I started getting the same fluctuations!!! ugh.... Today I an getting an adaptor and an actual pressure gauge to check things out... frustrating.

I’m a mechanic. My friend just came over with his 2017 f150. He called me and said that he was hearing engine knock. And when he came over I opened the hood and I heard that knocking or ticking sound and I could tell it was coming from the throttle body. And when I saw this video that’s exactly how it sounded. It has to be this because the moment I heard it my hand went straight to the throttle body. Great vid. Thanks.

Bought my 2016 5.0 new, been ticking on cold starts for 120k miles. I took it back in about 6 months after I bought it and was told no problems found

Well my ticking noise dropped 3 cylinders. BAHAHAHAHA 😂😂😂 9 months later after they said a new long block , still ticking. Lol Mine is because the correct oil pressure isn't getting to the tensioners. I think it's from bad casting in the block. And there is no way in hell they put a new block. Surly my luck ain't that bad to get 2 bad blocks. My dad seems to think that's the problem. He has 60 yrs experience and head mechanic at Ford for 20 years and owned his own shop for 40. He said ford had same problem in the mid 80s.

that just saved me a lot of hassle! that was exactly the problem with my microwave! thanks!

Our microwave tripped the breaker when we stopped the cooking cycle early by opening the door, if we let the timer stop the cycle or we stopped it before opening the door it was fine. We thought we had an electrical issue, after having it checked out by an electrician he suggested to us to research the microwave on youtube. After watching a couple videos we replaced the 3 switches and a couple other items and it still didn't work properly, then we ran across your video and after doing your suggested adjustment you saved us a few hundred dollars, my wife and I were going to meet at Lowes tonight after she got off work to buy another microwave. Thank you so much for your very detailed fix to this issue.

It's a ford, therefore garbage.

Who in the world made that front ford emblem? I am a Veteran. I need one of those

My mustang is doing the same issue, glad to see its not extremely major 😅

I thought it was my water pump, dealer thought it was intake, but couldn't get into it. Guess I know what to swap now.

Its just begging to be opened up, thats all

Another issue could be the switch holder. You can see the wearing track from the hooks at 3:33. That small groove is preventing the hook from hitting the normally open switch at the same time as the middle normally closed switch. The slight timing difference can blow the fuse. I had the same issue and replacing the switch holder solved it. Unfortunately this is the second time I replaced it. Next time this happens I will just disconnect the normally closed switch since I don't need the safety features it provides anyway.

What model of micro wave is this? My CGMV176NTF is doing the breaker flipping now as soon as power comes to microwave.

Perfect. I got 2016 yesterday and two ticks one on driver head and one exactly right here , glad I don’t have to chase one of them. You saved me 50% of my stress :)

Promo`SM 👊

Thank you huge help!

You sound like vern from bearing sea gold