วีดีโอ

@@MichelPidner thanks man! I have to admit, the phone makes it sound brighter. When testing it it had more low end. Next time I'll have to remember to add a little more bass when recording

@@louismartinez4467 lol

@@JonAncel oh I seen those. Thats true.

@@lootbaglarry8.2 haha thanks man. Love your work too 🤘

Lol thats funny! I never heard that one. Looks like "a Delorien from Temu". I like that lol

There was lots of parts i wanted but for now I just took the radio, radiator fan, radiator coolant reservoir and some screws and bolts. It had nice gray interior but mine is tan so I passed

@@BarkingBadTV whatever speaker you go with make sure its an 8ohm for this amp. I did a 4 cuz I was impatient and I regretted it. I have the original speaker in it now but in the future ill get a upgrade speaker with the correct 8ohm. I'm glad you found this video helpful. I too like this amp

@@davidalpaerts4151 you're awesome man! 🤘

@@inputmig6625 wow! That's is cool! Nice find! And I didn't know they had that problem with the foam. Good to know, thanks. I was just cleaning cuz I like to clean lol I really need to get a head for this so I can jam on it

@@ant_yep aye i wish you good luck on finding an amp head, cant wait to see a vid on it!

@@choppedandscrewedcustoms Nice! That gold looks beautiful! Great pedal, I really love intonating on it

​@@deathmetalcoverz5865 maybe. If it was abused and still has the factory tube. That tube is like 30 years old. But even mine doesn't sound as heavy alone, it needs help. It's really hard to say cuz I actually have 3 vs100 and not one of them sounds the same, the other 2 are on the lighter side of gain/distortion. The one i use for YT sounds the best. I always wanted to try a new tube and see if anything happened but never got around to it. I mean on my videos it's all amp, I use no pedals. But compare to other amps it is a bit less distorted

@@joaokleber1668 these are two celestion G12T-75 @ 16ohms wired in parallel = 150w, 8ohms. I think two 50w or 60w @ 8ohms each would be a nice match for this head. = 100w or 120w @ 4ohms. So it can really get them speakers moving. I have a 4x12 cab with G12T-75 and with the same head it sounds thicker/"basier." So i have to lower the bass on the head

@@deathmetalcoverz5865 NO WAY! Dude thats awesome! And 50 Bucks!.. NICE! Can't wait to hear man!

@@ant_yep tomorrow i will make tons of vids i have lots of covers and tone tutorials to record

@@deathmetalcoverz5865 nice! Hella working i see. So interested in your tutorials. I could use some help in tone. Especially in leads, I sound so thin and dry lol Good luck man, may the metal gods bless you 🤘

@@ant_yep yes thank you man! Ill let you know when i post videos of covers and tutorials. I might start with tutorials first

@@foofy14 Nice man! Sweet setup 🤘

@@deathmetalcoverz5865 I just checked and mine sounds like AC/DC with headphones. Yeah thats definitely not how it sounds with a cab

@@ant_yep yeah thank you man. Like i switches headphones and it sounds better but still not nearly as good as it would with a cab. Also i still havent decided on a cabinet to get or anything. Im a noob with this stuff cause ive only used combo amps, but the back of the valvestate has 2 identical loudspeaker inputs on the back that are both 4 ohms right? So do i need a cab that has a 4ohm port on the back? (Im not going for full stack just one 4x12 or something)

@@deathmetalcoverz5865 yeah it's the headphone port, I'm having the same issue. And no worries, ohms are weird. I always have to triple check myself. So yes on that head there's 2 speaker outputs (total of 4ohms) they share the same ohms. So let's say you have a cab or speaker that's 4ohms, thats it, you can't add another. You reached the minimum. But if you have two 8ohm cabs or speakers, them 8ohms turn into a 4. You can plug 2 8ohms in that head. Or you can plug 2 16ohms. Cuz 2 16s turn into a 8. 4ohms is perfect for that head. Anything higher won't hurt but the sound suffers. Example... them 2x12s I'm using are both 16ohms = 8. Its ok. But if they were both 8s = 4. That would be perfect. Or if you get a 1x12" box and put a 100w 4ohms in it that would do too.

@@deathmetalcoverz5865 ah I overlooked the part where you said you're going for a 4x12 cab. So yes you want a 4ohms cab to match perfect. But if you did get a 8 or 16 thats still ok but the sound would be lacking. Its when you get into 2ohms or 0ohm that would be dangerous for this amp

@@ant_yep alright so to recap, if i had just one cab like a 2x12 cab and thats the only one i wanna use i would use one cord from the loudspeaker input of the amp and then that goes into the 4ohm section of the cab. But if i wanted to use a full stack i would do the same thing but for both loudspeaker inputs of the amp i would plug them into the 8ohm section cause 2 eights turn into 4? Is everything i said correct? (Also sorry for commenting so much you are great help and i have the same amp as you but i need to learn about ohms and cabs before i buy one)

@@deathmetalcoverz5865 that one is the vs100. I mostly play that one. I do have a 8100 but somethings wrong with it. It doesn't sound right

@@ant_yep thank you man. i keep watching the vs100 vids like this one to get excited for the amp cause mines arriving in like 4 days and its my first amp head cause all ive ever had were combos and such. but i do not have a cab unfortunately but i have a few ideas on what i can do to still play it when its here. also I dont think so but ima still cask does this vs100 have a small built in speaker? or do i need a cab for sure

@@deathmetalcoverz5865 tight! I totally understand. I too watched a lot of valvestate videos lol. And no there's no speaker in there. And its a 4ohm head so whatever you use as long as it equals 4ohm and up you are safe.

@@ant_yep sweet thanks man and also i seen a video of someone plugging a guitar right into an amp head and then they took another cord and plugged it into the marshalls headphones spot and then the other end into a combo amps fx loop. Do you think that would work? I have a fender champ 100 that id possibly use until i get a real cab

@@deathmetalcoverz5865 I have no idea. I don't know that trick. Pretty cool. I'm definitely curious, ill look that up

@@deathmetalcoverz5865 nice! Enjoy man 🤘

@@ant_yep thanks im trying to play death on it and i might boost the amp for early cannibal corpse tones

@@deathmetalcoverz5865 thats cool man! I just seen your channel, I can't wait to hear

@@ant_yep i will definitely make videos with it when its here🤘

@@Valandos888 wow. 2x15??,... and a mesa tube... wow. I can't even comprehend that. NICE!

You're 100% right!

if you can, whenever you get a chance, that would be rad! I have a Valvestate head (VS100h) and a Peavey Mace and am hunting for the perfect 15" to pair with them

@@SenorDrewfus nice gear man. And ok sounds good. I meant to do a video on the peavey cab but I didn't have a bass head to test it. I didn't think to try a valvestate on it

Thanks! I was just messing around. Some was pieces of slayer tho.

Lol 😅

Nice! I like the t75's too. They can really take a beating and seems to like being played extremely loud. They're definitely a good work horse

Yo King! Nice to see you

Yes I do buddy. Hey hi, nice to see you. Oh cool. You have a TH-cam channel? I will subscribe 👍

Sweet man! 🤘

I do have the model 8100 (slightly different) paired with a 1965A, it fucking rocks when playing sum 41 and simple plan so give it a shot you wont regret it.

@@ozzy8791zig heck yeah brother 🤘 thanks!

No you're right, I definitely need more practice. In the future when I do this amp again ill go over my work cuz its still not working right. Thanks for the tips

@@ant_yep Good look buddy i love these amps too i have a couple of them. I like them so much I had one put in a custom made plexi cab. Looks awesome. I learned to solder as i mainly work on cb and amateur radio..

Dam thats cool. I feel bad cuz I still haven't used it. I was meaning to but I don't have a bass head and then time flew by. I had to look up T-40 bass cuz I didn't know it and MAN! They looks Amazing! What a great setup. Peavey 2x15 cab, Mark lll and t40 bass! NICE!

@@ant_yep yeah there’s tons of videos on the T-40s. Built like a rock and as heavy as one too. Peavy never skimped on making stuff lightweight lol. I got the bass and Amp still from 40 years ago lol!

@@patpompeo9354 wow... I can only imagine the weight. I'm definitely going to be watching video on the t40s. What... did the T stand for Tank lol And man thats really cool, really. Good stuff 👍

@@ant_yep 🤷🏻‍♂️ no idea. All the guitars and basses were Ts

Good I thought. I used to use that amp and one Marshall lead 1960 cad at shows all the time. It sounded tighter and punchier. Kinda like a quick punch. The full stack sounds fuller/thicker with a bit more bottom end. I wish there was a setting where these two cabs could come out to 4ohm together. That would be awesome

I have no idea really but I regret selling it. You make great points tho

You can run a valvestate into a 8412 cabinet. Cuz the valvestate is 4ohm and the 8412 is 8ohm. 4ohm can go into the 8ohm because its greater. Now if it was opposite thats a no no. 8ohm head should not going into a 4ohm cab. What helps me remember is always thinking about your head first. Whatever that number is you want your cab number to be the same (that is best performance) or higher. The higher the cab ohm number is not so great performance but still safe. You can even run 2 8412 cabs because a 4ohm head with 2 8ohm cabs = 4. Perfect match. 8ohm+8ohm=4ohm.

Lol "like GOD intended" Nice! You're absolutely right about that. And yes, I should of got the right ones from the start

You're absolutely right man. I still need to get on that. Thank you

Thats cool man! I love hearing stories like that. You got to jam on a lot of cool amps. Nice! And thanks! Just showing an old Peavey some love. I been wanting to get a head so I can jam on it but I'm not a bass player so I really don't know what's good or not