วีดีโอ

Thanks for the comment bro. I'll be making a video on my setup next week. Stay tuned!

@@velocistafpvlooking forward to it. I got the list of items you used from your other video but would love to see the wiring and how you got all the telemetry on the goggle screen.

Acro, probably but it's more of CG as the jet needed a wee bit nose heavy. I do have a timer but still figuring out what my flight time is. The battery voltage seems accurate enough as the O3 is connected to the flight battery via the AIO. Currently, the timer is set at 5 mins, but most likely the 2200mAh packs would only last 3 minutes or with an extra 30 seconds max. I'm running a GEPRC AIO but only for OSD and arming signal for the O3. I'm still flying with an RM ER8 ELRS PWM receiver mated to a Hobbyeagle gyro and not using Inav.

I'm using DJI O3 bro.

Slow and steady hands with a sharp surgical knife 🤣🤣🤣 I think analog would be better as it doesn't weigh as much as DJI. I had to upgrade the motors and ESC adding more weight causing the plane to have a very low stall speed.

@ I guess that’s the only option lol. I probably wouldn’t be able to use DJI either way because turns out I bought the 500mm version

@@uviolin593 Analog probably would be best as even the 750mm is a heavy fatboi with DJI.

Thanks bro! I don't have access to mini displays, so OSD would be needed. The Rafale isn't actually ready yet, I need to make some modifications to the cooling of the O3 air unit. Still gets too hot inside the fuselage. Hopefully I have time off work to work on it during the year end holidays to complete and maiden it! Thanks again!

Thanks, ma bro! Lets fly again! 😘😘😘

I would think those who would want to fly together should all switch on at the same time before take off, not in the middle of another's flight.

It was the G2 and O3 for the quad. My friend turned on his V2 and Vista on the quad. We sometimes have both goggles change channels on its own on power up.

I'll probably able to come up with a tutorial in 2 weeks or so. Keep a lookout! Thanks!

@velocistafpv okay

@@velocistafpv and when are you going to make it?

@@velocistafpv ?

Nowadays u know la how the weather in Bolehland. As long as there is a bit of sun, we go fly! Hahahaha

@velocistafpv ya man! Everyday! Full day raining🌧☔️⛈️🌧

I don't have a build video but I do have a parts video for the VX3.6. th-cam.com/video/SZkDQyg76cM/w-d-xo.html

Thanks bro. Pakai DJI Goggles V2 with Foxeer Wildfire module.

@@velocistafpv awesome!

It was supposed to be a few weeks ago but ran into an issue with one of the canards, so I didn't risk it. Going back to the workbench until I can find time off work to rectify it. Hopefully get to maiden in the second half of December.

@@velocistafpv we want to see max speed on fpv )))

Tak penah pakai 4S bang. Tapi rata2, 6S mmg akan rasa lagi power dari 4S...

@ ohh sbb sy masih pakai 4s baru nak try pakai 6s tu nak thu power dia jauh beza je mcm mana.. ok bro trima ksih

Thanks bro!!!

It was recorded via the V2 goggles (the Vista doesn't have on board recording for video nor audio).

Thanks bro!

Thanks bro!

@velocistafpv you're welcome!

Thanks bro!

I'm just using SupaFly's preset for 3.5" bro.

I'm using GEPRC SpeedX2 2105.5 bro

I'm thinking of doing a video soon once I'm back from work travels. Keep a look out on that one! Cheers bro.

@@velocistafpv this is nice, need tut :D

Angatkat satu brooo

Thanks bro!

Ntah. Aku kelam kabut je bila powerloop ngan natang ni. Maybe sebab pilot tak biasa bila loop tu takde momentum sbb ringan sgt. Hahahahaha

Tq bam!

Cincai slap together one. Hahahahaha

Thanks bamfu 😘😘😘

Tomorrow, joms fly bro!

Thank sbro!

Thanks bro!

Thanks bro!

We're going again on 21st Oct Monday morning bro. Joms!

Thanks bro!

Thanks 😁

Thanks bro!

Thanks ✌️

Thanks ✌️

The AIO was only there to provide arming signal to the O3 and OSD (OSD can be customized in Betaflight) and do not control the plane at all. The BetaFPV 14Ch receiver is ELRS, therefore u can set it in the configurator to output Rx and Tx via 2 PWM channels. These two will then connect to the AIO providing the arming singal to the O3 via the AIO. Plane control will still be via the 14Ch ELRS in PWM.

@@velocistafpv Thanks 😊.

Thanks man! Ur one of the reasons I'm getting into tinywhoops!

Thanks bro! Taking a break from FPV now. Will be a while until I come back to Bolehland.. sob sob.

@@velocistafpv ehhh where to ma bro?

@@CurlyFPV Singapore for work bro. Will be back this Friday for two weeks. Hopefully can find time to fly. 😅

@@velocistafpv ohhh ok la sg can still fly there ma. See this weekend wanna fly or not bro.

It is quite simple really, just need a 3D printed mount that replaces the stock one on the antenna. Will be making a video out of it but would need to wait as I'm travelling for work. Cheers bro.

Thanks!

Aritu pi Kota Puteri tapi tak jadi maiden. Canard problem huhu.

Thanks mate!

Thanks mate!

Thanks bro!

I listed all the parts in my video maidening the VX3.6. Only difference now is I replaced the TBS Crossfire with ELRS. th-cam.com/video/sLCI7ntfsbo/w-d-xo.html

Thanks dude! How does the 1300mm and 1700mm compare? I'd like the 1700mm but hangar space doesn't allow it. Lol

That is actually a Radiomaster 2.4G Moxon directional antenna which gives higher gain. I've sinced removed the Moxon antenna and modded a Radiomaster Pocket antenna to fit the Boxer. I don't think it is better in range, probably just similar. Reason to put it on is because it is foldable and need not be removed during transport. This short video shows my newly moded Radiomaster Pocket antenna on the Boxer. th-cam.com/users/shortsdQGbR9FXc1o

@@velocistafpv noce 10x for the info