วีดีโอ

@@MikeyGarrett-o7y Daystar

Watch the video at the 1:15 minute mark.

@@DMDLS8 the drawing is what the adapters that l designed look like, the measurements are missing as the fab shop used them and lost them. Look at the side profile as the bracket goes over the top and under the Liberty reinforcement bumper behind the bumper cover, the length depends on your new bumper and the spacing you want, and the front is prepped for the same prep as a Wrangler. Hope that helps.

@@adrianpenacerdan watch at the 5:40 minute marker

??? I have no idea what you are asking?

@@g.t.g1111 no, it's been sold

WOW!! It’s what they like!

Didn't have one

Not on this Liberty... I don't like anything under 18"

Thankfully thats just one person's opinion. So when you build one you can put what you want on it. To be honest they were not my first choice, but was descent for my price range for a used set with bolt pattern etc. Thanks for watching. 👍

Oh it is so, and the reason for all that work. I get to drive it till it sells too. Have to sell it at it's prime, not after years of wear and tear.

It was for what l needed and there isn't much out there for these as far as lifts and budget. It did the job well. I would buy and install again.

@@murcieme thanks, because I just got a 2005 Jeep liberty and I have been trying to find a good lift kit for it, have a good night.

​@@Sylvan_Cowlesno problem, anytime.

Everything is basically up to you on what you want and your needs. If it's just a street machine or if you want some mild off road abilities, if you want more clearance, going for looks etc. Do what you need to accomplish your desire for the rig to perform.

In that portion of the video it's described what year range l believe at the time it was 07-15 Wrangler they don't fit perfectly but they will work. And l purchased on eBay. They go behind the grill so it helps hold them in.

@@murcieme thank you so much ! And there are just the lids right? Because the angry eyes I have seen have a whole circle insert

Yeah they are only the portion you see with a recessed lip that tucks behind the Grille.

They are only Decals as l built to sell and l didn't want to risk putting something more permanent. So they are simply 1/2" Round Silver Decals and yeah l also purchased on eBay

I am always willing to answer questions but also appreciate your concern on repeats.

Wrangler Angry Eyes

Thank you l appreciate that. 👍

Thanks Ryder....

Thank you, even though l missed a lot of the start....

@@murcieme it's okay it was a long video 😁

@@monkeyhugs2434 yeah l know l was thinking too maybe it was for the best, but so much work took place before the 1st picture and the 3rd.... Would have been nice to see that too and find a way to consolidate the whole video down by less time on each photo....

The end of the video shows parts and misc. But l ordered through my local wrecking yard LKQ they brought them in from other yards. They are from the Renegade model OEM

Inside

Thanks buddy

I agree it was built for a purpose different than the Wrangler. All car manufacturers have many different options in different vehicles providing the variety needed for different needs and use. It's a common understanding yet some don't get it l guess.

@@murcieme I currently have my darker blue 2007 limited on 4 jack stands because the tranny went out at 250k miles. It used to belong to my dad and i remember the day it was new. It's been a family truck for years and we have towed many other family cars when they died. I mean nowadays there is a crossover epidemic because people want fuel efficient suv's. The new chevy trailblazers are a joke, you can't tow a small boat in that.

@@javieracevedo9352 that is a cool memory to have, sounds to be some sentimental value as well. Worth keeping it alive. 👍

​@@javieracevedo9352 I got mine from my dad too. And three weeks ago the engine died. I ended up buying a rebuilt one. And the hoist and book. Did it ask myself and I'm no mechanic. not hard and very possible. Do it!!

Through my local wrecking yard LKQ

Sorry I only speak English.

So there was a change in the grille and front bumper, if you notice the earlier Liberty the front bumper goes straight under the grille then up under the headlight the 2005 the bumper is straight across the Grille and Headlights then ties into the front fender flares. So the answer is yes but you would have to change and upgrade the Grille and Bumper and turn signals. There may be more in the bumper reinforcement, yet they may be the same l am not sure. If your planning on going with an off road bumper like l did then you just need a grille and turn signals.

Oh, the fender flares are OEM from the Renegade model and yes they fit like the std flares. And l contacted my local wrecking yard.

???

These are OEM for the Renegade model.

No link just type in the description on eBay.

They are Wrangler and do not fit perfectly but you can make them work

Thank you l am glad you enjoyed the video. 👍

The bumper is in the video and description purchased from eBay so there is no direct link, go to eBay and type in the description of the bumper. I lost the dimensions of the bumper brackets but did show in video what they look like so you fill in the dimensions and drill holes to fit the wrangler mounting points and as l mounted to the Liberty reinforcement bumper. It's not that difficult once you have access to the bumpers and device the distance you desire between the bumper to grille etc. The panel gaps l need a couple weeks to have made them shipped $250 + shipping

No l sold it , not much options on these for taillights

@@murcieme I found some bad azz aftermarket tail lights for mine and it completely changed the profile from the back…however currently tryna sell mine lol

@@fiveflames2636 cool, funny they share the same taillights as the Caravan. Yeah l wanted something else, l can't remember weather l didn't like what was available or didn't want to spend the money they wanted.

Thanks, glad to hear your experiences. 👍

Thank you so much l appreciate your kindness. I am glad you enjoyed the video.

The lift is in the video and not sure on tires didn't note that

You might be able to zoom in on tire size, but the lift is a 2.5" Daystar lift.

They did not fit perfectly but l did find a sweet spot where they held in place good

Thank you.

Its in the video but dimension's are not depending on your bumper and spacing desired you fill in the blanks

@@murcieme are they bolted on the tow hook part or the bumper reinforcement?

@@999herbalist They are bolted through the reinforcement bumper itself through the top and bottom as drawing shows. 👍

@@murcieme thank you. My bumper broke. Looking for a replacement and found your video

@@999herbalist anything is better than oem 👍

Yes l bought it cheap. I agree with you on the XJ's and the amazing 4.0L Straight 6 👍

$850

Thank you l appreciate it. 👍

$850.00

@@murcieme good deal, Thank you for the info

We will see 😂

Window regulators are a typical problem with these Liberty's how did the seller do you dirty did he change out the tires after you bought it? Enjoy the Jeep 👍

To do exactly what we did to this Mini. Full color change and a tricolor custom stripe paint scheme would cost around $12-$15K I am asking $12,500 for the car, Basically what the paint job would cost someone.

The video still exists on my youtube channel here.

Why were you so disappointed?.

Watch video at 6:54 to see the brackets l drew up. Unfortunately l lost the drawings that have the measurements l believe the fab shop had them but company changed owners and were lost. But it can be easy to figure out. By measuring the Jeeps reinforcement bumper that the brackets will slip over then determine the distance you want the bumper to be according to the mounting points then prep the front of the bracket to mount pattern for bumper.