วีดีโอ

120psi

Glad to help. It's a lifesaver for sure!

Great minds think alike!

Function forms 2's. Here's the video of the installation. th-cam.com/video/cLuYDg03NQU/w-d-xo.html

Thank you. It will change the car 100% I hope the old man will drive her a little more after the swap.

Thanks for the feedback. It's always nice to find out what people do and don't like about my videos.

The pan has to drop down far enough to clear the pickup tube and crank before it will slide backwards

I don't know.. Maybe the bump cut the flip view wire inside the loom?

As far as I know, it is. I would have to do a little research to figure out if there were any other controllers for just the drivers side. When I fixed the damaged wires, both seats started working.

I appreciate the reply, and I kind of figured it , going to do a little more research also! Thanks 👍🏻

@150zorba no problem

Can't win them all. Most of the footage for part 2 was lost. And my boy lost interest in the project shortly after. It's about 95% done it just has a few loose ends and needs tuned

Why wouldn't they? is a better question. The car is not original it's been a "hotrod" since the 80's. The power and drive ability is there. LS is just a better foundation.

I bought mine a Menards. Home Depot or lowes should have similar options

@FullThrottlePerformanceMike Are the new tracks smaller than the old one or about the same just doubled up?

@nicholausm8931 they were almost identical. The only difference was that the new ones were about 3/8" longer.

It took about 8 hrs doing it on jack stands.

It does. We have yet to drive it with the turbo installed due to weather. But there are a handful of people running turbos in one of the ACES Facebook groups I'm in.

I reached out to Aces this morning, and the promo code has expired. I will edit the title and description. Thank you for bringing this to my attention.

Glad to help

Yea I only really use mine to hookup my trailer.

I'm glad to help!

Have you checked for vacuum leaks. It's been a handful of years since I ported the intake, but I'm pretty sure you need to make a throttle body gasket that blocks the iacv hole that goes into the throttle body. If that hole is open, it will let air into the intake and cause it to rev

@ ohhh okay that makes sense, yeah I smoke tested the manifold and it was pouring out the bottom middle of the penelem I also think I cut that a little to far as well, I did use a lil of rtv there though😆

@abused.cg5 were you able to seal it up with rtv?

@@FullThrottlePerformanceMike the first time It didnt seal so I put more I’m still waiting for it to dry to try to smoke test it again

@@FullThrottlePerformanceMike that ended up being what it was I just needed to cover the iacv inlet thank you brother!🤘🏼

They for sure need tio be way more transparent in what is being auctioned off and who is the seller

Sorry to hear that. That is why I go inspect everything now. Tho they are making it harder and harder to get in the yard to look at stuff. At least in Nebraska idk how it is in other locations.

That would definitely help with the blind spot on that side. But I have an old modified bus seat on that wall and the cutting and welding to add the windows would mess up the patina so I don't think it's worth it.

Yea I think mine is 18 ga. The box it's self doesn't seem to be the issue. The fact the only had 2 slides on that massive drawer is the issue. It says it will support 120 pounds with 2 slides. But for how long I don't think I had more than 60 pounds in there and it lasted about 1.5 years

Thanks

Yes it can be. It's recommended to run a return but it can be dead headed.

👍

Thank you

@@FullThrottlePerformanceMike 4g ftw. It would be amazing to see the gauges from a stop in a very safe location during the day with it perfectly nice & dry.

@@TheOrderOfTheLightCommand are you asking to see the tach and rpms doing a pull?

@@FullThrottlePerformanceMike Yes, if you do decide to do it, be careful, please. Maybe even show the differences of having the VTEC kick in at 4,000rpm or 5,000rpm just to see what happens? Is that possible? Two pulls with different VTEC kick points?

@TheOrderOfTheLightCommand that will have to wait until the spring. As we have snow on the ground now.

Thank you! It has been a fun build.

I was in the same boat a few years ago. Glad to help. To many busted knuckles trying to force it.

Thank you. Did you see it at Sema on gone-gpn?

@@FullThrottlePerformanceMike i live in Pittsburgh, ill have to look for more videos of it. Awesome build and what kind of 20in wheels are those on the fleetvan

@feelthesteeltatt00piercing they are dodge truck transport wheels 5 on 5.5 patern

Thanks!

I made a few videos about porting the intake and plugging the egr and iacv. I'm pretty sure it is in this video. th-cam.com/video/10dPIlAoKYA/w-d-xo.html

Thanks. There is definitely a lot of stuff in those engine bays that doesn't need to be there. They look so much cleaner with all that stuff removed!

That would be funny!

It's been a fun build!!!

Thank you. I have this weird thing in my brain that makes me think I have to do everything and that I want to learn how to do everything.

@@FullThrottlePerformanceMike i can relate + i feel like - if someone else can do it for me - might as well do it myself as well :D

Lacquer thinner softened the oil base house paint it was painted with and the pressure washer blew it off!

Thank you it's been a fun build for sure

No problem!

Thank you . I would be more than willing to help someone else out on a build. But I don't need another mailtruck. I have to many other projects I need to get out of my and in to reality!

Hi mike this is sam from alabama What did you think about your airbag system on your snailmail? I am about to order a system. what do you recommend, what size of air line did you use to fill the airbags? A 1/4 or 3/8?

@samolvera9358 I have ss7 in the front on a mustang 2 front suspension and ss8 in the rear on a 4 link. I am running 3/8'' lines with a airlift performance 3p unit. I love the look slammed. It doesn't handle to bad driving around town. It does have a lot of weight transfer forwards and backwards under hard acceleration and or hard braking. Only gets dicey barking hard over 60 to 70 miles an hour. I do have front and rear sway bars as well.

Great !! That’s exactly what I got 7-8 bags and 3/8 air line thank you!! Stay safe!!!

It's pretty good and you are right 100% but the bag is nice!

I just held on to the pinion bearing with my hand.

@@FullThrottlePerformanceMike Thank you

Ain't far off

Should still work maybe it doesn't work on sale items idk

As of now we really like we haven't got a ton of drive time on it. And the car is currently tore down to add a turbo over the winter. I think that 90% of all the issues people have are install errors, exhaust leaks, and unreasonable expectations for what "self tuning" can do. You should expect to have to do some tuning before the self learn can take over. Unless you are on a 100% stock motor. Use my promo code and save 10%

No problem!

Thank you!

I would bet you can buy them from melling. If not email me I may have the one you need.

It was custom mixed.