- 11
- 43 023
GTOVRIT
United States
เข้าร่วมเมื่อ 9 มิ.ย. 2011
Get Over It:
Get out there and do something! Explore, build, or experience something :)
Get out there and do something! Explore, build, or experience something :)
Flex 24v Tools - Bit Holder Mod (Free!)
Hey!
This is just a little mod that makes my life easier.
I obviously bought into the Flex line of tools, let me know if you think videos about them will be helpful.
Enjoy the crappy edit!
I hope that it helps someone or gives you new ideas :)
- Remember Get Over It! (GTOVRIT)
This is just a little mod that makes my life easier.
I obviously bought into the Flex line of tools, let me know if you think videos about them will be helpful.
Enjoy the crappy edit!
I hope that it helps someone or gives you new ideas :)
- Remember Get Over It! (GTOVRIT)
มุมมอง: 942
วีดีโอ
DIY truck bed ladder support (Short)
มุมมอง 912 ปีที่แล้ว
Quick 2x4 Ladder support project. It's funny how little things make life so much easier! Anyways, its a simple video but I hope that it helps someone or gives you new ideas :) - Remember Get Over It! (GTOVRIT)
Is the Decked Drawer System worth $1,400?! + MODS!
มุมมอง 6K3 ปีที่แล้ว
Hey! This is my Daily truck, but I camp and off-road a lot with it. For any major construction projects, I just bring the trailer. So I, wanting to make storage of my tools and items much more convenient, decided to try out the Decked Drawer System. 😊 In this video I set it up for my truck and talk about a few MODs that I’ve made. I go over what I like and don’t like and explain why I think thi...
BAK Industries Revolver X2 Sucks? Why?
มุมมอง 2.5K3 ปีที่แล้ว
Hey! I really wanted to like this truck bed cover and used it for 5 years, (not 3yrs). Most of this was because I just didn’t want to give up on it. But I’ll Get Over It! In short, it just doesn’t hold up to real world use. There are newer versions of this out now so I’m hoping that these issues have been fixed. If you’re looking at getting this or a new one for yourself, keep an eye out for th...
Quick Tips: The BEST way to roll/fold/store straps?!
มุมมอง 733 ปีที่แล้ว
Hey! I finally got around to making this quick tip video. This method has been very handy for me over the years and is even better when you add rubber bands. [Unplanned video and on 1st take :p] I hope that it helps someone or gives you new ideas :) - Remember Get Over It! (GTOVRIT)
ARB Air Compressor Bluetooth Pressure Control - Set up and Test
มุมมอง 8K3 ปีที่แล้ว
Skip to 10:44 for load test! Hey! So basically, the is a Bluetooth air pressure gauge, inflator, and deflator all in one. It is a really cool idea and I’m really excited to try it out! In this video I set it up for my truck and demo it for you. I’m going to be putting it to the test on the trails soon but I couldn’t wait to show y’all it. At the time of recording this, I can’t find anything els...
Harbor Freight (HF) DIY Internal Knee Pads
มุมมอง 8K3 ปีที่แล้ว
Hey! This is a simple DIY project for making internal knee pads for your work/tacticool pants. I tried out several pre-made ones on the market including 5.11's, Carhartt's, and an USM style set. They were all terrible and I found myself with this very easy and simple design. HF Anti Fatigue Mats www.harborfreight.com/4-piece-anti-fatigue-foam-mat-set-94635.html HF Anti Fatigue Roll www.harborfr...
Chat: Cold Start Shooting Drills (CCW)
มุมมอง 83 ปีที่แล้ว
Let’s Chat! This is series opens the topic at hand for discussion for those with constructive mindsets. Cold Start shooting drills: you start you training off cold with no warm up and then score yourself. This initial score, i.e. 3/10 hits (30%), is your final score for the day. Afterwards you practice your desired shooting maneuvers to build up skill and muscle memory for your next training da...
Headless Man tells you about the BEST Gun Gloves for the modern shooter!
มุมมอง 333 ปีที่แล้ว
Hey! I finally found a pair of shooting gloves that I like, and they are not even “tactical” gloves! They are good for long guns, pistols, and most importantly your cell phone 😊. They are way comfortable and just surprisingly natural to wear. These are Framing gloves designed for use with Nail guns and other Air tools. Reasons I love them: • Very Comfortable • High Dexterity • Works well with p...
Laser CNC Steel Target + DIY Stand
มุมมอง 413 ปีที่แล้ว
Put together this cheap and reliable stand for my new steel target! I hope that it helps someone or gives you new ideas :) - Remember GeT OVeR IT ! Target: www.amazon.com/gp/product/B0141T35Y8/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 Stand Clamps: www.amazon.com/gp/product/B01MSZP19L/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 Stand Chain: www.harborfreight.com/14-in-x-4-ft-trailer...
Harbor Freight (HF) Ammo Box project - DIY
มุมมอง 18K4 ปีที่แล้ว
This is a simple and neat storage box idea. I hope that it helps someone or gives you new ideas :)
This is happening to mine as well 😮
About what size are the screws?
Had ours pro installed , if thoee tabs dented the cab thats installed badly
Had our 5 years it broke due to 75 mph crosswinds, bent it backbin place still works. We keep ours outside in South Dakota. Never greased it either. I dont know what type you can buy thats better to be honest. ?? If you know please tell me. I think yours went wrong when someone modified it. Temp never bothered ours. Trying to find parts. Our vinyl is good still. It gets 100s here in summer.
Awesome video dude ty ❤
Question: the anchors in the side utility track you got, could you remove or add them before you cut the top platform? It looks like the top platform would allow them to slide but not to be added or removed. I'm thinking about this product but I can't live without my utility track anchors. Thx.
Would’ve had a better argument if you had bought it new and unchanged by the previous owner of the cover. Just bought this one to replace the G2. We’ll see…
I bought mine new. Installed on F350 with a Thule TracRac SR. It all worked very well together for about 4 years. It was very water tight for the most part and I (even now) have had very few problems with it not closing or buckling. But after 4 years, in the same winter/summer location, the glue suddenly started giving way. The black vinyl covering just began to shrink quite a bit, and even if I were to glue it down, there's no way to stretch it far enough anymore. It now looks like crap. 3 year warranty long gone as I'm now in year 5. It still covers my cargo ok, but it's hideous. Junk construction and no excuse for this.
OMG, MAN…….then you have spray painted wheels and those bumpers!!!!! What the fuck man. Oh, the humanity….you can’t open the drawers with the tailgate up!?!?!? NO SHIT!!! I’m surprised you didn’t get a sawzall and hack off your tailgate. I think that everybody who’s watched this video has the opinion that you should go and engineer your own bed deck drawer system since all of your ideas are so much better than what this man put out your truck is a joke.
Trying to be ultra-frugal and ends up looking like a tweeker went wild on his truck bed….SMH…..PLEASE STOP MAKING VIDEOS, ABOUT ANYTHING….THANK YOU.
This guy is talking shit about a product that is not even made for his truck…..you can legitimately reject everything he is saying. Seriously, look at the shovel and the Sanford and son plastic ghetto ‘Molle’ thing it’s attached to.
I immediately said “do this” to myself when I went to install both. Saw this and said “Yep!”
There’s a reason they’re not insulated already, it will make your ammo sweat. JS
Maybe open up the casing so you could put a nut on the screw, along with maybe some thread-locker so it doesn’t work itself loose from vibrations.
My dude! I work in industrial plants that require FR (Fire Resistant) clothing. Well, they don't make FR pants with knee pad pockets. After watching your video, I decided to cut up some old jeans to make my own knee pad pockets with. Now I have 6 pairs of my favorite Carhartt FR pants that have internal knee pad slots. And the fatigue mat works great. So cheap and you get so many pairs out of it. Kneeling on steel grating, scaffolding, steel tanks, concrete, wood..my knees have never been happier at work. And after one day, the mat does start to mould to your knee for a perfect fit. Very much appreciated.
How did you ground it? I'm building a portable system as well and that's the only thing I haven't figured out yet.
The foam in the ammo can would be good to keep electronics in for an emp
no…. It wouldn’t….. foam would not stop an electromagnetic pulse from frying your devices. Unless there was foil in the foam ?
Great lemonade from lemons. You can also clean up the edges with an angle grinder and sandpaper.
You buy a used item that another man cut into with a hack saw, beat the shit out of it for another three years and it still covers your shit, and your telling me it sucks, I'm sorry bro, but the bed cover isn't the one sucking in this scenario....... Utah kid Get over it
Anybody watching this considering buying one, please go watch a couple real videos reviewing this product
anyone know the srew dimentions?
Thank you man. My wife is gonna be mad but I'm about to sacrifice one of her yoga mats 😁
Why did the compressor cycle while filling?
Lol OShen! 😂
Thanks for sharing a very unique perspective no one ever talked about. I’m planning on getting one, but didn’t realize that much wastage of space with this system
Hi, can you put the link of all of your plumbing parts?
Did you take it apart to cut it? Going to do the same to mine
Actually, I was able to cut it while it was installed. I would highly recommend a good jig saw (metal&wood combo blade) and/or a oscillating tool (metal blade). :)
Noice 🇦🇺👍
I appreciate the design of this, but will be trying to make my own pocket on existing (heavy) jeans or just sew a set into the jeans w/o a "pad pocket". I fabricate and repair boat canvas, and other heavy duty applications, and instead of having a huge table in an even bigger workroom, I have to lay everything out on my basement floor, which is covered in indoor/outdoor carpeting. I have blue knees already, so I will let you know what works for me, But the hourglass design is very helpful. Thanks!
Ohhh that could be pretty sweet. I've always had trouble you finding the right work pants in general. Let me know if it works out for you!
I’m installing one tomorrow
How do you like it? I just ordered mine today.
The best thing on the planet If you work out of your truck, I have had for about two weeks, it's nice to go out to truck open a drawer and see what you need and grab, and you be surprised how much you can fit in the drawers.
And the crazy part is that they come with two screws. You have enough screws to install both on both tools, but only one hole.
Thanks bud, I sure appreciate the share. Save me some time , I had considered buying some but I wanted to try and make’em first. This is exactly what I’ll do with all my pairs of kolossus work pants ! I might even double it, got a bad knee! ✌️
You can add a lock nut. I have seen people do it with a Kobalt xtr.
Where did u get that foam?
Harbor Freight fatigue mat
What is the raggae music at the end name
Pedestrian by O-Shen Probably my favorite of his !
It's a shame that you had to force kabolt to stab his own brother flex like that
Amazon
I found that for some reason nobody really makes an ideal knee pad insert. All reviews on the ready made ones are always conflicting as to how good they are. Had some from Tru-Spec too and even told them what I found bad about them and made some suggestions, but nothing new yet. Anyway I thought about making my own as well and will try your method and material. Thanks.
I would agree haha, oddly enough internal knee pads seem to be a very "personal" decision. Yeah, give it a shot and let me know about any fine tuning you do that works!
just wondering how you do a recalibrate?
How have these knee pads worked out for you ?
yes! I've noticed that I wear them allllll the freaking time. They can bulge in the pant so not great for your social occasions but very functional. I would recommend making 2 sets at the time. I use them so much that I probably go through 2-4 sets a year and its just more convenient to have them premade and slip them in as needed.
👍👍👍
I have a feeling he watches wranglerstar
1k views but no likes?? wow, take my like
Haha. You the best 😀
Thanks for the review. This is great. Question, does the exhaust port unscrew? Don't want the air to exhaust into my vehicle, looking to add a tube to exhaust outside the vehicle when deflating.
Yes! It does but it is incredibly small and the exhaust port does have a filter of sorts but I'm not confident that it will keep outside debris from entering it when not in use. Sorry, work caught up with my so I have not had time to respond.
Whats the tyre attachment you're using called?
Hear you go:) Haltec H-5265 Standard Bore... www.amazon.com/dp/B01938M8MW?ref=ppx_pop_mob_ap_share Sorry, work caught up with my so I have not had time to respond.
How long did it take to deflate from 33 to 20?
Soo this will heavily depend on your tire size but in the 28ish inch jeep tires like ... 1min if that. I'm waiting for some time off work to finish up a new testing video
Good idea
Where did you find the air port adapters? The manual indicates 1/8 BSP
They're annoying! You pretty much have to lock yourself into the arb parts on that one. They're the only ones I could find with a 1/8" to JIC-4 37*
Thanks, I was able to find a ntp to bspt adapter on Amazon.
Ahh, soo yes get the ARB ones ahah But I actually picked those up late one night at homedepot. There were part of an air Guage kit with several adapters. I think it was like $8 for the kit.
@@marksuehrstedt4713 from where did u find ntp tp bstp
Curious, does the valve hold the line pressure after the unit is turned off? Was considering this for an air suspension system connected directly, would be great if you could inflate the bags and they stay lifted after the unit is off, but if it releases the pressure that wouldn't work..
I just installed one. From preliminary testing, it seems that unless the release solenoid is powered, it won't let out air, therefore off = no problem (assuming no leakage loss in your air system)
@@chrisjohnsonphotography163 Thanks Chris, I emailed ARB, and of course all the did was recommend the much more expensive Linx system. Think I'll give this a try.
@@erickeiffer6641 Good luck! I hope that does the trick for you... What pressure are you usually running your bags at? I assume <100psi?
@@chrisjohnsonphotography163 Haven't got them in yet, but max for them is 100 PSI.
@@chrisjohnsonphotography163 100% correct so far in my testing!
I was looking for some explanation on how to fix it as I have speedflate system and I wanted to ensure that it would fit. Thank you so much, stay safe and enjoy the outdoors
Thank you very much for the video, excellent idea.