- 2
- 25 159
TechGram
เข้าร่วมเมื่อ 30 ก.ย. 2010
Melting of PCM
Melting of OM35 in Aluminum cavity under 10 W heat input. Heat input is provided with a silicone rubber heater.
The specifications of the heat sink:
Melting temperature = 34-35°C
Latent heat = 171 kJ/kg
Density of liquid = 870 kg/m^3
Mass of PCM filled = ~39 g
Cavity inner dimensions: 40*40*30 mm^3
Complete melting took around 22 min
Video speed = 4X
It is observed that there is an inclination in the free surface of the liquid PCM. This is because the heat sink is not perfectly horizontal. The inclination of heat sink results in horizontal and vertical components of the body force. While validating the numerical results with experiments, this has to be considered. Hence, the heat sink has to be checked with spirit level carefully while doing experiments.
The specifications of the heat sink:
Melting temperature = 34-35°C
Latent heat = 171 kJ/kg
Density of liquid = 870 kg/m^3
Mass of PCM filled = ~39 g
Cavity inner dimensions: 40*40*30 mm^3
Complete melting took around 22 min
Video speed = 4X
It is observed that there is an inclination in the free surface of the liquid PCM. This is because the heat sink is not perfectly horizontal. The inclination of heat sink results in horizontal and vertical components of the body force. While validating the numerical results with experiments, this has to be considered. Hence, the heat sink has to be checked with spirit level carefully while doing experiments.
มุมมอง: 42
วีดีโอ
Crop protector from birds, Wind turbine
มุมมอง 25K6 ปีที่แล้ว
In India, nearly 65% of the people are directly or indirectly dependent on agricultural sector for economic survival. The annual income of farmers is significantly influenced by the yield of the crops, which is continuously decreasing due to natural phenomena and poor technological advancement. However, the particular attention should be paid to the damage caused by birds. In present study, the...
Bad boy
Could u please give contact number to buy this ?
Mughe banana hai
Super sir
Sir, where I will get this crop protector and furnish phone number.
How much cost for this machine please reply back
It costed us INR 5000 in total, the cost can be reduced by further modifying the design
I want this plz contact mi 9665500008
Thank you for your interest, It is under further development
Bgm off chesi video post cheyye ......
Super consept bava al the best
Excellent