- 47
- 257 014
Brett Wojack
เข้าร่วมเมื่อ 29 ก.พ. 2016
Garage walk through and 10+ sleds for this winters lineup
bringing some more snowmobiles home and going over each sled I have in my lineup for the upcoming season
มุมมอง: 1 704
วีดีโอ
Last ride in the mini boat for 2024 didn't go as planned
มุมมอง 2.7Kหลายเดือนก่อน
Last ride before winterizing and putting it away for the season did not go as planned. Forgot my key for the trailer lock, then only had 3 gallons of gas when I thought it was full, battery died, then ended up being too wavy. Also before anyone comments, I know waters are public. I wasn't hating on the wake surfers because I enjoy watersports too. Just saying this boat only does well on calm wa...
Building an ICEAGE bomber skid and getting sleds ready
มุมมอง 496หลายเดือนก่อน
2 of my sleds get new wraps and the M8000 gets a new bomber sled from ice age performance.
2007 LBZ Duramax Build Overview!!
มุมมอง 6K3 หลายเดือนก่อน
my 2007 LBZ duramax and what I've done to it over the past couple years
Johnson tilt and trim wiring
มุมมอง 945 หลายเดือนก่อน
took me a long time to track down what wire is what for the tilt trim system on my OMC 3 cylinder so if you are wondering what wire goes where or how to make your own wiring harness like I did I hope this video is beneficial for you. leave any questions in the comments thank you.
New transom and new motor on my 10 foot boat!!!
มุมมอง 8145 หลายเดือนก่อน
After 3 years I finally got to rebuilding and beefing up my transom along with getting a new motor for my boat!
Arctic cat pro cross headlight delete!!!
มุมมอง 2298 หลายเดือนก่อน
couple different options for headlight deletes on the pro cross chassis arctic cat consumer and race sleds!!
Snopro 600 mod at ERX Thomas ride day
มุมมอง 1369 หลายเดือนก่อน
2014 Snopro 600 Speedwerx open mod with 136" skid turning a few laps at the Thomas snosports ride day at erx motorpark. first time having this sled on the snow after building it.
m8000 short tunnel review
มุมมอง 11510 หลายเดือนก่อน
In this video I talk a little bit about what to watch out for when shortening your tunnel along with cooling and how the sled handles.
Cat Eye Silverado switchbacks the proper way
มุมมอง 9910 หลายเดือนก่อน
how to install LED switchbacks and wire them properly into your 03-07 Silverado.
How to shorten your M8000 tunnel for free!
มุมมอง 40411 หลายเดือนก่อน
doing a 6" tunnel cut and still using the factory bumper and tail light.
3 wheeler spring riding and long wheelies
มุมมอง 182ปีที่แล้ว
taking my 1984 Yamaha YTM200E shaft drive snow riding and road wheelies
Putting a sled deck in my duramax ft. the buick hauling a trailer
มุมมอง 2923 ปีที่แล้ว
picking up a new sled, putting a sled deck in my new truck, Buick hauling a trailer, plus a garage update. enjoy! don't forget to like share and subscribe (: that would be greatly appreciated brettwojack58 mischief.garage
My Truck is in the Shop and They Loaned Me This!?!?
มุมมอง 1294 ปีที่แล้ว
My Truck is in the Shop and They Loaned Me This!?!?
why I had to tear apart my motor and put it back together twice...
มุมมอง 1.7K4 ปีที่แล้ว
why I had to tear apart my motor and put it back together twice...
sounds like my VW
Is the xf a 2 stroke or 4
2 stroke 800
No airbox on the 650?
The modified one is jetted and setup to run open carbs, my yellow ice racer is as well, the stock 650 I still run the airbox
you didn't have any trouble wiring in the 2019 cab lights? I need new ones and i like the updated look on those! i've got an LBZ just like yours minus the chrome strip on the sides
Hardest part was running the wires, have to drop the headliner, visors and overhead console, run the wires across and down the pillar but just taps in to your light fuse inside the drivers door. Cutting the holes in the roof was very nerve wrecking, just measure a lot and take it slow
First time watching your show, what lake are you on? Good content!!! Maybe lake Minnetonka?
This was on biglake/mitchell lake in biglake MN, but I do hit quite a few lakes in central and northern MN. Minnetonka would probably be definitely too wavy for this little boat
@Mischiefmotorsports I use to have a Yamaha jet boat, I know what you mean Early in the morning, was a lot fun Smooth as Glass I lived on lake Minnetonka, wish you the best for next year Denny from Minnesota
That’s what she said
Did you need a tune
This thing is SICK!
I’m amazed at the number of Duramax trucks that never haul more than a 10 pound bag of cat food. My 2009 3500HD Duramax is a ranch work truck. 205,000 miles, everything still within factory specs. Still original brakes. Nothing but AMSOIL products. 24mpg at highway speeds after the delete. Change oil once a year with lab analysis of the oil. Never an issue. Everything bone stock except the delete. Two other diesels… 1984 K2500 6.2 with 258,000 miles on it. Bought new… now my livestock water hauler. Used good oil… dual filtration system… never put in gear until engine warmed up… Power Service in every tank of fuel. 2007 Grand Cherokee with Mercedes 3.0 diesel. Perfect in every way.
What point are you trying to get at here? The truck in this video I haul a 36 foot gooseneck quite frequently and also a 28 and 20 foot bumper pull equipment trailers at least once a week, just because it has wheels on it doesn’t mean it isn’t worked
Nice lbz bro, how much does it usually cost to get the trans built
Fully built trans with triple disc converter, billet shafts, and then having the shop do the T case and new U joints while they were there ran me just a little under 10k. Little overkill of a drivetrain but should definitely hold up well for more power in the future
@@Mischiefmotorsports sounds good, thanks for the info
sick build brother woukd love to see more if jt
Thank you! Hoping to have 1 or 2 more videos made before it goes away for winter
079 Thiel Shoal
Moore Amy Wilson John Thomas Amy
Damn that's a gorgeous LBZ man, I'm an OBS Ford guy and a 1st and 2nd Gen Cummins guy myself, but I respect any great diesel pickup build.
Same here! Thank you I really appreciate it
Seat belt dick.
Yo i got question how much does a truck like that run in price
To build it to this caliber or buy one already done?
@Mischiefmotorsports id like to jump in on this and also ask if you could do a price build breakdown.
nice rig man
Thank you I appreciate it!
Shit that’s a wicked truck man
Thank you!!
Nice truck man. how did the headers fit in there, guys have told me only shortys will go in without having to remove a bunch of shit on the drivers side. I have a 94 Silverado Ive been restoring.I started with the frame and done a lot to it since but is that back sliding rear window stock. Mine got busted out somehow even with a headache rack on it but I cant remember if it has 1 or 2 pains that slid in there, you have 1 in yours I see. Damn nice truck.
What size was the tunnel before you did the tunnel cut
153”
Think I can run the setup with no lift and some cutting?😂😅
Great video!🎉
Yeah! Would love to see more of the boat and stinger!
I’m actually in the process of making another video with it right now
I have a 70 Impala 350 how much would it run me to put a cam kit
i prime my lifters also!🤔😟
Thats actualy so sick
You got an update on cooling?
I do, rode the sled last weekend and only had to take the trail 15 minutes to and from our spot but with scratchers down the sled stayed cool right at normal operating temp!!
Thanks for the update, probably going to do the same thing with my sled this weekend. I’ve heard you don’t need a kit but you’re right I havet seen a single video of anybody doing it. What did you end up doing with your excess wires underneath? And did you notice a difference riding with the tunnel cut?
Only thing I’d advise different is maybe leave that rear 2 inch piece out, I landed off a jump and a paddle from the track broke my tail light, but I added 30 psi to the rear shock and it didn’t happen again, so just watch out for that, don’t want to have any lugs catch and rip off. For the tail light excess wire I just cut a few inches out and then soldered and taped it. I also did notice a difference riding, sidehiling there’s definitely less drag in the snow, and right away I wheelied over backwards😂
Thanks for letting me know about the tail light I’ll make sure to put it up top. I’ll let you know how it turns out for me. Thanks for the help!
Cmon man you left out every detail and showed us only one step of MANY
Useless ass video
Has base model truck, complains about it not having features
The best money can buy 👌
So true
Have you thought about putting on the hi beam mod so that the low beam stay on when you turn on hi beam
Nice just don’t include most of the stuff you did in the video where we all tryna figure out wtf to do 👍
Too much face too little truck!
Cool obs
I’m debating in putting this size on my 85 long bed
Funny, I just seen this truck for sale on Facebook
my 95' has squishy brakes, and i think a total of 3 cup holders
get a 22'' chopper, block off a couple intake passages and jack the motor up in 1/2'' increments until you find the sweet spot. that crappy aluminum prop isnt doing you any favors. also, never rev it up on the hose like that great way to snap a reed or 3. if you do, use the throttle neutral detent so you give it some timing, not just fuel. cheers.
Wow I have seen this advice posted on FB groups for months now, only now did I realize why they say this. You are keeping idle timing but getting higher revs that way, thats why it might blow. Thanks for the information mate!
Love it man! I just put my '78 Stinger 75 on my 1432 sea-nymph... flatbottom jon... lol 😄 it screams!
What’s the size on the rims and tires
Nice truck and rims, we're you buy the rims and how much please
Were U get the head light what the name and part number
My 14' Imperial is only seeing 30-33mph with the johnson 75 short shaft. What kind of speed are you getting?
all in the prop and setup
Hood scoop real or fake
Did you put a leveling kit on your truck front suspension? What did you use?
It’s easier to remove the whole dome light assembly. Remove the 2 screws from the light in the middle. Pull the assembly out. You can easily remove and install the map lights. Don’t forget to put the ground wire back when reinstalling.
Got my 91 k1500 about 3 months ago and I’ve done some mods just stumbled upon your channel and love the content with the OBS appreciate the content
Nice. My Cam or lifter is shot #3 intake I need to do this same job on my C1500 nice to see it clears the front.
What size and offset are those rims