วีดีโอ

Thank you for doing a good job with our music in the background and actually explaining things. I hope you have some more current versions of this not so old. Five years is a long time ago and galaxy far far away. Would like to see something on proper placement and where I need to locate it. I only have 70 mm x 70 mm. It's good for starting and learning. Do you have any beginner courses available in your listings of other videos?

Do These instructions apply to any fiber, laser . I have. Genmitsu Z5-1 Fiber Laser can you do something more current years software? Or has software not changed that much. Every time I go to the textbook and type something, it doesn't change it still says the same thing text. how do I change that? I just wanna start with functions and then I'll work my way up. I've been using Lightburn for the last two years, almost 3 with my other three lasers. Fiber lasers brand new just got it yesterday I thought I would start with something simple and not too expensive at first get to know it and then move onto something more powerful later, but I didn't want to spend too much on a limited budget.

perfect tutarials thank you

Any tips on settings for slate ingraving

This island is huge

Can you get to bear island campground with front wheel drive? Wanna take my atv out here?

Is there a reason you used 4hi instead of 4 low? Will be heading out there soon in a ram rebel, trying to see best configuration. Great video, great advice!

Very informative video thank you!

Super helpful! Thanks so much!

Great content... I'm inspired to post similar content for my EZCAD2 UV laser.

What coating is needed to keep the .metal from rusting after the laser burn

ezcad is such a lousy program for importing anything. Not a single SVG (or any other type) has imported correctly. Can't even use the laser my company purchased for doing customer images because no image will import without problems. Letters get broken up and to may things have to be fixed and then nothing hatches in a usable way. It would be nice if I could just search for perfect images off the internet but in reality, in a business setting, you get the file you get and have to work with that. You tell the customer you need an SVG. They send an SVG and it's unusable. Then what?

What kind of engraver is this ? I want to start engraving pistol slides and know nothing about it. What engraver do I start with ?

pew pew pew 😙👉💥

Do you set the timing and delay for each speed?

When I go to remove the fill after selecting my image, the fill option is just a question mark, help would be appreciated thank you, great video has helped me a lot

thankyou bro

Thank you very much for the informations :) However I'm having some problems: the vector file looks very good and doesn't have double vectors but when I hatch it on ezcad nothing happens, any idea on what I can do?

thank you

What if you put your finger in the laser?

Thank you, I have looked at this exact mount and want to see a review before shelling out $800.

Greetings I have F-theta lens 1064nm F=210mm. What size lens is that

What kind of laser are you using? Also, how deep can that laser go. Like say for instance you want to engrave a revolver barrel

About how deep is that final result? I copied all your parameters and ran a job. I told it to do 60x, because you had yours set to 10 and you said you had to do it 5 times. My image was as large as my machine could do - about 145mm wide and 100 high in 4 lines of text. Each pass was about 30 seconds, so the thing ran for something like 2 hours, due to 60x for each of the two pens, plus the cross-hatching. so I realized later it was actually some 240 passes. It was on 3/8" plate. Initially I was concerned it might burn through. I needn't have worried - I was surprised I only got about 1/16" depth, using 80% power with 50w fiber laser. Yours looks more like about 1/8" deep, but maybe not.

What settings are you using? I can't seem to get white marking.

what machines are u using

Will this fix the issue of uneven engraving where some part of the picture is lighter than other areas?

Thank you sir

I have a 50 watt.. mind sharing your settings?

This was awesome, thank you!

30W fiber laser enough to do NFA engraving? Thinking on getting one OMTech 30W Fiber Laser

how much workspace lens?

can you send me that file?

Red light pointer not showing from yesterday....marking is working... Help me to fix this problem

Questions if you’ve a moment. I want to make ammo with custom head stamp. Would it be feasible to take something like a loading block and use a fiber laser to do the custom marking ?

AMAZING!!!!!!!!!!!!!! 1000000 Thumbs up!

Very helpful. Thanks

Thanks a lot! That was a very concise explanation and helped me a lot!

Nice work. What laser system are you using?

Just what I'm looking for...best tutorial I seen...

Please send me your email address.

Know this, if you are in the business of engraving the ,"Firearm," part of a gun, you are supposed to have a gunsmith FFL. If you stipple, repair, or install parts or any modification of what ATF calls the firearm, you can not keep it in your possession overnight. It must be returned to the customer the same day, unless you have an FFL. Said firearm would have to be logged in and out. You also must provide the means to secure it, just like a dealer or other FFL.

This clown stole your video th-cam.com/video/JKsoFQcJeN4/w-d-xo.html

I just bought a 15 Colorado Z71, been looking for a bumper and came across these as well. Im digging the look of them.

Do the 2 red dots have anything to do with the prime focus? My 2 red dots come together at 25mm on my vertical axis and I have a 110mm lens

I need one of these to start my Lasik business

What software do you use? I have one here in Brazil and the software that came with it is bad.

That was great. Been scrolling your channel and you are a great teacher. I bet you could hammer this out within 5 min. Appreciate you

👍👍👍👍

Great videos. Thanks for the explanation! My laser arrives next week. I don’t have AI, so I’ve been using Inkscape. Any chance you know how to do pattern fills that way? For like stippling?