วีดีโอ

Great result! What media are you using?

How much does a project like this cost? 1100 sf all open floor plan everything 2 bedrooms and living space San Diego area btw, Im just trying to get an idea to see if it’s even doable for me

Looks good. How much did you charge the homeowner to do this? Took 4 hours? Thx..

That turned out really nice. What media are you using to get that finish? And what psi?

Hi, what type of media is good for a project like this?

Terrible filming. Too far away and too dark.

What if you’re dealing with color cement I see it takes off color or is that a stain on top of the cement?

Thx for the video. Can you seal right after sandblasting or do you need to wash first?

How much per sq ft?

What a difference looks great buddy!

Maybe this has be mentioned but. Those that have and those that will. I have a 2014 Mercedes Diesel SUV. And I am the only one that fills the tank I check and recheck before pulling the trigger. I have decided to go to a station that has a dedicated DIESEL PUMP.

This is amazing wish I could learn the art of sandblasting !

Hell ya! Thank you! I did almost the same process but then didn't realize the prime button until your video! Once I pushed that button a bunch... fired up! Thank you!

Out of curiosity what are you charging per square foot to remove paint from a concrete patio ?

I love it!

Had the same problem just 3 days ago 1 Put 15 ltrs of Petrol in my mercedes as soon as I realised I topped the tank with Diesel . Ran the car 12 mles it ran perfect . But I was really worried If I continue running the car I may damage seals or Parts. The car has done 250, 000 miles and I would hate to lose it I prayed for help. I rang a company on line they said their specialised Truck is just 5 minutes from your home .I said "go ahead " he arrived about 15 minutes later the Truck had all the right gear to flush out the contaminated fuel the whole job took about 40 minutes total. cost including Tip and VAT cost. £ 300 including 3 Gallons of Diesel The peace of mind was worth every penny The operator was also a fully Trained Mercedes Mechanic I can only say that was Divine intervention.

Oh yeah !!!

Great work! Really professional 👏👏👏👏 Please, try to always wear the mask 👍👍

great work

Yea definitely polish your pool steps you want them nice and slick😂

A close up shot of the sand blasting would have been cool. Slow no close up would be cool too, but maybe specialty equipment needed.

Gay

Great video! Thanks for sharing your experience and knowledge !

Great job ! I like the way it’s coming out. Do you think it would work on a painted planks , that are flaking pretty bad ?

Hi Thanks for the video. What kind of media did you use for blasting? What kind of wood was on the ceiling pine, cedar? Did the blasting leave a lot of texture on the wood? Thank you.

What a great transformation on the patio!

Paint goes a long way lol

That looks good. Love the natural wood.

are you spraying oxalic asid?

Transmission fluid evaporates in a day. Oil doesn’t and lasts much longer. On the ground a residual of diesel/gasoline evaporates even faster than transmission fluid

Thanks for the video!! My wife just pumped 16 gallons of unleaded fuel last night in to my 2015 duramax Wish me luck im hoping for the best

I love the excuses people use, uhh well I was on the phone that’s why I put the wrong fuel in. 😂

I could not get a 1/2" hose into the tank! How on earth did you get past the anti-siphon block? Answer: cut the end of the hose on a slant and cut a point on the slanted end. It worked, but a clear plastic more stiff hose in my case.

Awesome video! Thanks so much

We put a little gas in diesel in Canada , because it keeps it from gelling. My 2011 HD ran like a champion.

Thanks dude my wife just filled my truck after using it a couple of days. And guess what she put in it ?

Disconnect the feed line to the fuel filter.. put funnal with hose, turn electric on.. cycle electric till pump priming sequence emptys tank. Remove filter, empty it, reinstall. Add 2 gallons desile cycle to flush gas. Reconnect fuel feed line to filter. Add 5 gallon desile. Crank motor a few times, should turn over on 3ed or 4th try. (Should be good to drive to fuel station) Cycle as much diesel through system as you can. Replace fuel filter and fuel water separator filter within the next couple days. Congratulations you just cleaned your desil (oil) system with gasoline (solvent)

Ashamed to say I did the same thing but with E85 (flex fuel) I'd never seem it and it was a new station to me. Drove 5 miles and it stated to run rough and in pulled over and figured it out. Towed it home and drained tank, all lines and new filters. It was about a 50-50 mix with diesel and I always use Lucas Tues treatment. Got lucky...

Step one don't be a moron.

Did it have any issues after it did this?

I mixed half a tank of gas into my diesel. I wonder if just adding some 20W50 to the tank will help. It's been running fine and it's a 40 year old diesel toyota.

Same thing here: over 1Million mile OTR with 18 wheeler truck and today 08-28-20 10:20 pm i put gas into my 2019 ram 3500 cummins engine after i send my 8 years old son to ER room. What the fucking day.

Hey guys just had this happen to me the station had a bad holding tank and unleaded was getting in to the diesel tanks so I siphoned off all the diesel/unleaded fuel my question is there an application for this mix that I can use lawnmower weed Wacker etc etc? It was about 15 gallons of diesel then 32 gallons of the contaminated stuff

Hey wanted to check in to see if this vehicle is still running? Had this issue with my VW Passat recently and I really appreciate this car. I know its replaceable but.... so it was done the same as your video so far but when the car starts the engine doesn't catch usually till the second time. I am aware that might be a fuel injector issue. Any thoughts or ideas are immensely appreciated! Grace on us! Laurie🙏😊

Thanks for video.

Wondering, with gas being a solvent fuel and diesel an oil fuel; knowing 2 cycle engines use oil added to the gas solvent fuel to make it lubricate: so would per chance adding oil immediately to the fuel if you added gas by accident make it ok enough to run well enough until you can add more diesel a few gal at a time? (of course if a way could be found to mix it in the tank perhaps and aerator tube to cause the whole to mix with the 2 cycle oil so that it "approximates" the diesel fuel as a whole, that would be nice ) . You said it ran about 1 mile as it was : so with the 2 cycle oil inside perhaps going perhaps 10mph then hit the brakes, repeat 10 x , would mix it in the tank well "enough". save alot of effort "IF" it did work. The oil mix: is on the 2cycle oil can .

How much gas will do damage?

Thanks for the video!! Saved us $250!!!

I did this too to my 2015 Silverado 3500HD. I’ve been stressed and busy and didn’t pay attention to what nozzle I grabbed. I put $60.00 in an almost empty tank. Drove it maybe a 1/2 mile and she died. Had her towed. The shop drained the fuel, replaced the fuel filter and out about $50.00 of diesel in her. I got the call that the truck started, they drove it and it was good to go. Got to the shop,the engine cranked like what’s in the video. Finally got it started and started the drive home. Maybe a block away from the repair shop it felt like I put on the brake, the truck bucked and then got power back. Then about a mile down the road did the same thing. This time Engine Power Reduced came up on the display, then Furl Filter Requires Replacing. I so heartbroken that I killed my truck. So after spending $650.00 I have to get it towed to another shop to get checked out. I just hope I haven’t done serious damage to my big beautiful truck. 😭