วีดีโอ

aaaaaaaaaaaaaaaaaaghk! i cant get past the music going over and over and over and over .... next

O how fun

O that beginning though...

O my gosh to perfect. 😂😂😂

Very powerful song

Thats always fun to watch.

TIP: when copying macros from github, it's safer to either click the "Copy button" (looks like overlapping squares - maybe it wasn't there 4 years ago) -- or click "RAW" to load only the macro contents, then CTRL-A (select all) and CTRL-C (copy) -- than trying to select the right text with the mouse. Thanks for the video!

**Update** This video was for the 2.5 cm duo seed pixels from YPS. I recently received some 5 cm and the wiring was different. The process in the video still works. Find your data wire and go from there. Translate the tag. Just for reference, the 5 cm I just wired were Wire 1- Data 2, Wire 2(dot)- 12v+, Wire 3-Data1, Wire 4-12v-. The wire with the dot was 12V+.

Awesome video, I just setup my 3020 with a Raspberry Pi 5 running CNClinux with CNCjs added to it for GRBL . Can’t wait to make my first cut after I learn a bit more

Your music is disproportionately loud compared to your voice.

I just bought the x-max 3 qidi tech. I have fusion 360 for my onefinity elite foreman CNC machine. I was thinking of downloading ORCA Slicer. Do you think that would be a good slicer or just stay with qidi ?

Did you know there is a shortcut to center your selection ? just press the F9 key Kind regards Hans by the way thanks for this "tutorial"

First Video I seen that closes the gap in my understanding between the the design and the cut!! I am a complete beginner, and this is an excellent video. Sure I subscribed!!

Do you know if this is still needed with the Shapeoko 5 4x4 ?

THANK YOU! Saving this video to send to others when this comes up in the future!

I was stuck at download!!! so this was so great Thanks

music is super distracting btw!

Wow! What a set up for your machine. That looks awesome. Anybody with that much skill and knowledge to set their machine up like this should not be asked to leave ANY group! They are plainly stupid and ignorant.I would actually like to hear anything you have to say whether I disagree or not. Obviously you have much to contribute in any group that you join! I can relate though. I like to make soap also and the views on soap making are tightly controlled by a few Biatches. Now I'm banned just because I made a naughty or nice Christmas list. Was threatened many times so I made a Christmas list and they didn't like that so much. All of it was plain lies and speculation and was made in good humor and I clearly stated this at the beginning. It was a funny experiment because the ones that made the "nice" list enjoyed what was exaggerated about them and the ones that made the "naughty list" COMPLAINED AND WHINED and wanted to be off the naughty list. My whole thinking was "Who cares about some list" but yet these people whined and cried about it! I thought it was hilarious and crazy that these people were actually upset about a "Santa list"! So, in light of that, I would be glad to be apart of any group your in if it has to do with cnc work. My highest compliments to you sir. And I say that with respect.

Thanks

What feeds and speeds are you using for this?

Used the bit setter with Shapeoko 4. Worked great... Thank you; I couldn't find this info anywhere else!

Thanks! Have wanted to try this…. So now I have confidence to!! Thanks

Know this is 2 years old. I’m new to VCarve and using the shapeoko. My router will do all that is asked until it’s time to carve. It won’t go to the piece to carve Can you help?

When using Easel Im noticing that these cuts with inlays are taking up to 3 hours. What am I doing wrong?

Hi nice tombstones what cnc machine are you using? Thanks. John

Hi I am using shapeoko pro xxl, I tried using the bitzero like normal as per your instructions but the endmill just kept pushing down into the bitzero and wouldn't stop. I used bitsetter first, what am I doing wrong? Thanks in advance!

hey man, thanks for this. Do we still need this when using Vectric Vcarve Pro or has the built in caught up? Thanks!

This was awesome.

i did everything you did but my z-axis continues to cut deep into the wasteboard🤦🏾‍♂️🤦🏾‍♂️😩

Tolong, saya ada masalah di cncjs. Ketika listrik padam cnc diam tapi di cncjs tetap berjalan.

Saya dari Indonesia. Terimakasih vidionya. Saya masih pemula sekali di cnjs. Dan saya ingin belajar. Saya pakai kontroler arduino.

I couldn't agree more about the cnc4newbie users group. I had a newcarve in my shopping and ready to pay. The assholes in that group with their "this has been asked and answered" and their "do some research" comments turned me off so much that I bought another Shapeoko. The fact that that is allowed to continue is just a huge turn off. I do my best to help people because I have been given so much help. Your videos are a great example of what is so great about the majority of the cnc community. I really miss your content and wish you were still making videos. Hope you are doing well!!

Chris I have just watch this video again and I have a question the the first bit you had in the router when you initialize the machine did exactly what.also when you used the touch probe and set your x and y and then went to the middle oh the board to set theZ could you have sipped the probe ang gone to the center of the board and set the XYZ all at the same time using the paper Jeff Peters

Thanks for making this! We bought a used machine that has a BitSetter, but I haven’t been using it this way and I knew there had to be an easier way!

I try to install the TC PP into Aspire and get the error No closing quote on line On line 990 of file ".../..." and it crashes Aspire. Oh well thanks anyways, it was worth a try

Love the video, but the background music makes it difficult for me to follow (Dutch native).

Superb sir, what a help. More please!!

Great video, but I had errors loading those files when Vcarve Pro fired up. Thank you for the time to make this.

Awesome machine. I'm looking at a cnc4newbie machine looks same as it?

We have to use the z probe always or we can just do the tool change???

Thanks a lot tfor the video. I am asking if is there any possibility to include the autolevelling or height map estention to this program . I can not find an easy way to do it ! thanks

Hey bro I need help whit this using grbl

thanks broo, a question i have and arduino, some time the program cncjs send me a server conection probem

hopefully you will see this. I have done your directions but the file isnt showing in the drop down for post processors. I went back in to MyPost directory and it shows there. Thanks for any help you can give.

Chris When I go to the link you provided I do not get a screen to down load the Neils file could it be out dated Jeff

Would you be able to share the v-carve settings or provide the file?

Spray with water then take a heat gun at the low setting and you will get a stone effect

Hi very helpful video mm is more accurate than inches

Hi..nice video. For users that not have shapeoko. Is necesary to have bitsetter? or is possible with something to simulate for example an a second probe plate? thanks

great vid and idea, its been about a year how have they held up so far?