วีดีโอ

Should have the indicator on the top or bottom of the hub surface for the direction you were moving the hub. That was not an in and out movement. Or leave it set like you had it and grab the tire on the left and right and do that movement and may have seen more end play.

No, Thank you! 😅

Been awhile since last comment but turning the bolt you push in to adjust gap. That adjustment does both the 1/2 and 1/8 inch gaps??

Very good job 👍

I have a FROF15210C 10speed when I drop from 6th to 5th it grinds. I have pretty much to stop the truck to drop from6th to 5th. Do I need to replace my synchros? Is it hard to do it?

th-cam.com/video/7Xb0Co4hm-0/w-d-xo.html This is my first time working on or even looking inside of any transmission of any kind. It was a real learning experience. I would recommend watching this video before deciding whether you want to bite off a project like this or not. Eaton Fuller Roadranger RT6613 Manual Transmission Rebuild 13 Speed.

Just done 1 today.. All fixed! th-cam.com/video/vXmgb48cvT8/w-d-xo.html

Have you ever had to change the length of the clutch rod under the cab to get the TOB close enough to engage the brake disc in the bell housing ?

There's a little more to it than what they showed, which is only the basics.

Смысл понятен... Thank you!

We call them lay shafts in the UK the counter shafts

So why do a video with all the back ground air wrench noise?

Good Lord.....

So there are 2 countershafts 1 low and 1 high. Thanks for the explanation 👍

Thanks a lot for the video! I like the tool you made!

i really like the homemade tool with 1/2 inch and 1/8 inch all in one. perfect.

If you can step off of ur clutch pedal before u apply ur accelerator, u are using the correct gear to start ur rig moving.. You can go years with out need to adjust the clutch.. Riding or slipping the clutch cause ur in to high a gear will warp the plate between the driven plates and will there after be harder to select a gear while stationary in future..

just use a 1/2 head bolt to check gap

hay...

This Is How All Instructional Videos Should Be... Thorough 👍👍👍

I like!! not to much BLA , BLA ,BLA,BLA .! JUST Like this thanks!

Thanks for the help!