วีดีโอ

Why not shoal it cutting foam board?

I've had mine a few years, wish I wouldn't have loaned it out, but that's another thing. I need to find replacement filters for it but HF no longer carries it, so I'll need to figure out a cross reference. One of those cartridge filters would be nicer than the ones it came with...just have to find the right size.

Looks like hell

Measure to center of grip area and then multiply x weight reading.

😅 NO Demonstration! That Sucked!

how much that kind of pump sir

Ugly!!!

Replace power switch see a manual

I have both and they are nice quality

Is that a 3/4 plywood for table

Great channel !!

I used to follow a young mechanically minded man's projects on TH-cam. One day he was showing off his electric chainsaw and told how he saved time by fastening in place some part of the saw which I thought might be a safety mechanism. It wasn't long before the saw started smoking and he threw it down in disgust. If he ever associated fastening that mechanism with the smoke or if they were cause and effect, I don't know.

Thanks for the honest video both it and the comments were informative.

What products did you use for cleaning,derusting, etc? Looks amazing!

I just searched for a minor coolant leak with mine, on my truck. The sunlight was a problem. I shaded the hood and had a good picture. I got it up into tight places. Its a good tool for the money. I couldn't afford one when i was working as a mechanic. I am sure there are better ones, but this does a good job for me.

Thank you man for being straight up

You do realize you did not go over the different directions to use the screwdriver and how to set it. Thumbs down.

These are bees knees. The best socket rails in the market. They’re also same as Koken Z-EAL rails.

I think the push button will stop me from buying it.

If it were easy to set up to unscrew I would say it is great , but IT IS NOT EASY TO SOMEONE THAT NEVER HAD THIS TOOL !! If someone just use it without checking the direction the driver will take that person will end up tightening the screw and bending the metal the screw is affixed to ! None of you show how to properly set it up !!!!

You need show HOW TO MAKE IT UNSCREW A BOLT/SCREW !!! You avoid showing this !!!

It is very confusing when it comes to the instructions. Instructions talks about "adjusting L to R or adjusting L to R" But this tool is not used for "adjusting", but to "loose" bolts / screws. You are not showing how to adjust it one way or another and when I used it all I did was bent my board while no tiene at all happens in regard to the metal screw !

HF DONT SPONSOR THIS FOOL. It blows my mind how peope will "review" things and not even turn the dang thing on.

He should place the strap in the center of the grip area; the end alters the actual force as designed into the tool. Of course, the scale accuracy is also critical.

You shoul let people know that once the Wrench is set and put to.a poundage the click will always happen when the nut gets to that poundage regaudless of hand position. Thenjust cant understand why the foot out is important for calibrating the tool. Short video. th-cam.com/video/mk95F0hHS3U/w-d-xo.htmlsi=vYkcVXIWVyQJsmNr

Why does the plate on the pump show the water going to the left and the pump is turning to the right

I just bought one of these at harbor freight today as it was an open box special. I didn't have any immediate use for it except the price was irresistible at $29!! I WAS relieved at your hesitancy about it's usefulness during a zombie apocalypse which told me it COULD come in handy! If you hadn't hesitated, I'd be worried that I wasted my money. At least that's the excuse I used on my wife......

Nice review. Can I adjust water pressure?

Air pumpers made the pump water only not hazardous materials it would have a chance of blowing up or starting on fire

Thread lock for handles.

Does the camera head go inside a tank with oil in it

If you drop them accidentally, would sockets fall apart from the rails?

Mike I enjoyed your video and your humor. I have the exact same saw and I don't use it a whole lot. I wish I had more time for projects with it and that day will come. I also had an issue with my Blade Guard. My guard shattered at the screw hold down where the spring attaches that makes the guard go up and down as you raise and lower the blade. The part is obsolete and is not available from Chicago Electric. I tried epoxying the assemble but as soon as you use it a few times it blows up. I wonder if you or anyone viewing has any ideas to replace it or repair it. I will continue to use it, but would feel better using it with a functioning guard. Thanks to you or anyone that may have a solution.

Does it hav3 a pressure switch?

I want one to keep under the drivers seat for double duty, handy wrench and a lethal weapon, just in case of a bad encounter on the road.

Use an electric knife to cut the foam then an orbital sander with 80 grit to shape it.

That cheesy plastic depth stop busted the first time I looked at it funny. After it broke into three pieces, I told it a few things about its momma. After a lot of poking around the internet looking at dozens of replacements, NONE of which would fit, I finally found some dude in Texas who makes and sells a machined (or maybe 3D printed) aluminum part for $35. Installed one on mine and it works just fine.

My question is; How is the longevity of this pump? I mean is how long will it last if running 24/7? Can anybody please answers that. I am thinking for Aquaponics and Hydroponics.

For the 12 volt does it matter about the ampage?? 7amp vs 10am?

I bought one too. Instructions suck. It is not clear how to change the direction of the unit. I pushed it against my anvil and turned the collar, and it just kept turning. No stops or ratching, nothing. One review said to start turning pressure before hitting it with a hammer. Maybe that sets the direction, I don't know. And buddy, you need to get a proper hammer! That's a carpenters claw hammer. ;)

Can I restrict the hose to 3/8" or 1/4" hose for watering plants? 12 ft lift. It will be used for 5 minutes for 3 times a day. Would that burn up the motor? I have a rain barrel with a bottom hose bib to water my plants, and a watering timer. I guess I need a pressure switch to shut off power if there is no water??

I have one and need to burn weeds. Is this adaptable to a 16 oz. Coleman Propane tank (I am tiny and not young?

This torch is great especially at this price. Just be prepared for how loud it is when on full open. You will want earplugs, and maybe some for your neighbors as well. I am using this to burn off propane in two 420lb tanks that the previous owner left on my property that were used to heat a pool that was removed when he left.

Do some bunker hill security setups please

I agree!!!

Well... damn i bought the gorilla glue over the 3m because its THE ONLY duct tape to use haha figured it would be stronger but i havent used it yet. Where did you find your vinyl?

I also have a 61969 miter saw. Unfortunately, the saw got dropped at some time and broke a piece under the front of the turn table. I can't find the part because the turn table on the 61969 saw was modified. On your saw the Knob that holds the saw at a desired angle threads into the front of the actual turn table casting and the miter lock lever mounts to the under side of the turn table. On my model 61969 saw there's a plastic piece about 6" long that holds the miter lever and has a steel threaded insert cast into the front of this piece. The entire piece is attached to the bottom front of the turn table with 6 screws. I don't know when these changes were made so I don't know if my saw is a newer model 61969, or an older saw made before the changes. If any of your viewers have a saw that matches the description of a saw like mine and knows what this piece is called PLEASE let me know. Also, I double checked the model number just to be sure it is in fact a model 61969.

Rig a Warrior Ni-Cad battery to a Jupiter inverter so you can watch the Central Machinery drill press run when you throw it at the zombies.

Really good, well explained. Thank you.

What happens when there is no more water source? Does the pump shut off or get into some standby mode until it detects more water to pump out?