@@heshammahaba6668 You are welcome I must say that it is an excellent lathe. solid and accurate enough. I had a 2.2kw motor and a frequency converter. great for housework. how much did the lathe cost in what condition is it? add some video when you're working, I'd like to watch it. Hi
@@M870821 i will make sure to send you a video once i fix everything in it, it is in a good condition but the Screw controls are not working properly. I bought it for around 1000 eur I am looking for any manufacturer or representative or expert that can help me fix it, i will try to send you a video
Best engine Toyota ever built in my opinion. My engine has 230.000km and is tuned to 120hp. Same chain same waterpump more power still running. The enginge has no leaks and looks better in terms of sweating oil than any other car with half the km on its clock...
mine has changed from 75 hp to 112 hp and it runs 1.5 bar in charge pressure as it is also raised. and I have driven many kilometers with it. and they pull well with those hp :-)
I haven't coded the egr valve either. as it is so easy to clean whenever you want. I think I spent 20 minutes in the end taking it off and at the same time cleaning the intake nozzle as well
@@JR-pc4cr Toyota's are built differently. Unfortunately the diesel era ended and Toyota started to buy BMW diesel engines and now you only find diesel engines only in pickups or the land cruiser....
the Toyota yaris I also have a 1.4 d4-d, it has driven 442,000 and it has never had its chain changed and it still does not make noise. then changes engine oil and oil filter every 10,000km. so it is good for the chain and the engine
just replaced the clutch it lasted 470,000 as it has been running now. so that coupling has held up ok. then also replaced the water pump as it had also driven those km. and of course now multirem in the same round. Interesting to see how many kilometers the car has now. it still runs as well as it always did :-)
@@just_T4U you have not connected the vaccum control ring that goes to egr and intake?. if it is disconnected it gives the bad pull that you describe. and as for my turbo, it has the original turbo on it now and it is not sooty now. I have cleaned it several times in the past. and self-sensing intake at stop the splash I have also cleaned. also hated once when it switched off at about 3 rpm. there was the clogged fuel filter. they need the difficult change often as they often go bad change mine where 20,000 km approx. where it is 60,000 km on my other cars. but the filter costs quite a bit of money, so it will work :-). I hope you understand what I am writing, I am not good at writing English
Výkresy mám len na ramená a lyžicu , ostatné kovošrot a inzercia. Viac na stránke www.nasetraktory.cz www.nasetraktory.eu/forum/viewtopic.php?f=50&t=95455
th-cam.com/video/asbeuT4k-Ho/w-d-xo.html
Any sound on start up from chain when need replacement? Thanks
Nepomohlo by tam nasadiť poloos?
Určite áno , ide o to že keď diferencial zmontujem tak nejde zaradiť uzávierka, takže v niečom bude problém.
Hello do you have any information about Volman S18? I just bought it and i was looking for the manual or any information about it, thanks
Hi, I'm sorry, but I don't have any information about this lathe. And at the moment I no longer own this lathe. I bought a newer one.
@@M870821 thank you for your reply
@@heshammahaba6668 You are welcome I must say that it is an excellent lathe. solid and accurate enough. I had a 2.2kw motor and a frequency converter. great for housework. how much did the lathe cost in what condition is it? add some video when you're working, I'd like to watch it. Hi
@@M870821 i will make sure to send you a video once i fix everything in it, it is in a good condition but the Screw controls are not working properly. I bought it for around 1000 eur I am looking for any manufacturer or representative or expert that can help me fix it, i will try to send you a video
Best engine Toyota ever built in my opinion. My engine has 230.000km and is tuned to 120hp. Same chain same waterpump more power still running. The enginge has no leaks and looks better in terms of sweating oil than any other car with half the km on its clock...
That's impressive! I am thinking to remap my d4d Yaris too. Did you delete dpf and EGR?
@@cumminsdriver7439 no i checked my egr it was clean as a whistle. I have the Version without dpf.. now at 242.000.
mine has changed from 75 hp to 112 hp and it runs 1.5 bar in charge pressure as it is also raised. and I have driven many kilometers with it. and they pull well with those hp :-)
I haven't coded the egr valve either. as it is so easy to clean whenever you want. I think I spent 20 minutes in the end taking it off and at the same time cleaning the intake nozzle as well
@@JR-pc4cr Toyota's are built differently. Unfortunately the diesel era ended and Toyota started to buy BMW diesel engines and now you only find diesel engines only in pickups or the land cruiser....
the Toyota yaris I also have a 1.4 d4-d, it has driven 442,000 and it has never had its chain changed and it still does not make noise. then changes engine oil and oil filter every 10,000km. so it is good for the chain and the engine
just replaced the clutch it lasted 470,000 as it has been running now. so that coupling has held up ok. then also replaced the water pump as it had also driven those km. and of course now multirem in the same round. Interesting to see how many kilometers the car has now. it still runs as well as it always did :-)
@@just_T4U you have not connected the vaccum control ring that goes to egr and intake?. if it is disconnected it gives the bad pull that you describe. and as for my turbo, it has the original turbo on it now and it is not sooty now. I have cleaned it several times in the past. and self-sensing intake at stop the splash I have also cleaned. also hated once when it switched off at about 3 rpm. there was the clogged fuel filter. they need the difficult change often as they often go bad change mine where 20,000 km approx. where it is 60,000 km on my other cars. but the filter costs quite a bit of money, so it will work :-). I hope you understand what I am writing, I am not good at writing English
Ora marcia ancora ?
On ont the blu 🎸
Dud
Wow Amaizing
how often should it be changed?
Salve Ogni quanti kilometri va sostituita? Grazie
Lui non è italiano
@@matteoronzani6587 grazie lo stesso 👍🏽
I know someone with d4d yaris 450000 km
My brother has done close to that in his d4d yaris, so I decided to buy one as well
Mine has two hundred thousand miles on good engine 👍👍
257 000 kilometer
How much miles or kilometer?
257 000 kilometer
Tenho uma peça dessa aqui no Brasil,te interessa?
me mande fotos desse torno, obrigado mail: none21@azet.sk
Dobrý den. Ten podkop máte tovární výroby?
Zdravím , nie podkop je doma-robený .
@@M870821 je tak to je super a daly by se někde za úplatu sehnat výkresy? Budu stavět domeček a chtěl bych si něco takového vyrobit. Moc pěkný model.
Výkresy mám len na ramená a lyžicu , ostatné kovošrot a inzercia. Viac na stránke www.nasetraktory.cz www.nasetraktory.eu/forum/viewtopic.php?f=50&t=95455
does it need to be changed?
That’s awesome. Very nice build
Thank you very much
Piston hydraulic pump , cca 12L/ min.
What type of hydraulic pump do you use?
Nice work! Looks great.
Vďaka konečne to ide tak ako som si predstavoval.
Ahoj. Pekná orba. Gratulujem.
Ďakujem .. Stále je na ňom čo zlepšovať. :)
pomocníci dohlížej nad prací! :-) ten vyvoravac a traktor vam zavidim fakt dobrej concept a vse co ste na nem pouzili!