- 5
- 23 627
Shed Gym ZFP
เข้าร่วมเมื่อ 29 ส.ค. 2020
Yet Another Wooden American Flag Video
Nothing original here, but still a fun project. Used the same technique that everyone seems to use on TH-cam.
Only variables were:
-Used 1x6 lumber ripped down to 13 - 1.5”x37” strips
-Stained with General Finishes Red and Blue Dye Stains and a tintable white water-based stain from Varathane (with no tint.) 2 coats each
-Used pocket holes instead of glue and brad nails
-Finished with 4 coats of Minwax spray Polycrylic (Satin) with sanding in between each coat.
-Burned the wood both before and a little bit after. Probably wouldn’t do the after burning if I did it again. Might burn the before a little more aggressively.
Music: Grivooga - Slalom
Only variables were:
-Used 1x6 lumber ripped down to 13 - 1.5”x37” strips
-Stained with General Finishes Red and Blue Dye Stains and a tintable white water-based stain from Varathane (with no tint.) 2 coats each
-Used pocket holes instead of glue and brad nails
-Finished with 4 coats of Minwax spray Polycrylic (Satin) with sanding in between each coat.
-Burned the wood both before and a little bit after. Probably wouldn’t do the after burning if I did it again. Might burn the before a little more aggressively.
Music: Grivooga - Slalom
มุมมอง: 94
วีดีโอ
Shou Sugi Ban Wall Art
มุมมอง 1.6K4 ปีที่แล้ว
Stumbled on the Inspire Woodcraft series on Shou Sugi Ban inspired finishing. Thought it looked awesome and wanted to give it a try. Saw a google image of a project I wanted to try and recreate for my office. Seems like that was made by an Italian furniture maker called La Capanna Della Sam. So here is my attempt. I put a few of my own twists on it. Here is a link to the Inspire Woodcraft page....
ZERO FOOTPRINT -DIY Cable System Demo (Lat Pull - Low Row - Belt Squat)
มุมมอง 9K4 ปีที่แล้ว
I only have about 80 square feet in my shed for my gym, so I have made everything to fold up, roll, and be put away. This cable system is built into joist and recessed into the floor. It is a - Tricep Press down - Lat pull down (with leg holddown) - Low Row (with foot pad) - Belt Squat (Loaded from standing)
DIY Vertical Plate Storage
มุมมอง 6K4 ปีที่แล้ว
Strong vertical plate storage. Safe for weights. Easy slide. Tools: Mitre Saw or circular saw Drill Press or Hole Saw (1.5 inch bit) Drill/Impact Driver Materials: 2x4 s4s 1.5 inch Dowel 1.5 Inch furniture grade PVC pipe Structural screws Wood Glue
DIY Loading Pin
มุมมอง 7K4 ปีที่แล้ว
This is the best solution I found for a loading pin. It’s easy to load, protects your plates, and can be made to custom lengths. Tools needed: Drill Pliers Mitre saw or hack saw Dremel sanding bit or file Materials: 1 inch black pipe 1 inch pipe cap 1 inch pipe flange 3/8 x 2.5 inch eye bolt 3/8 nut 3/8 lock washer 3/8 washer Electrical tape Loctite thread locker 1.5 pvc (preferably furniture g...