![Fresh Vintage Garage](/img/default-banner.jpg)
- 102
- 266 095
Fresh Vintage Garage
United States
เข้าร่วมเมื่อ 25 ต.ค. 2023
Tools, equipment, lifts, more tools, tire changers, wheel balancers, scan tools, DIY stuff and did we mention tools?
ICON TrueFix Software Exclusively from @harborfreight Tools - Taking Your Repairs to the Next Level!
Today we are checking out the BRAND NEW ICON True Fix Software Exclusively by @harborfreight Tools!
For $299.00 this is very impressible with SO MUCH data at your fingertips including wiring diagrams, removal and re-install procedures, Tech Service Bulletins (TSBs), fluid capacities & specs, torque specs and so much more - you MUST SEE what Harbor Freight has done with this software!
If you have not checked out our ICON T10 and T8 Scan Tool Videos be sure to do so below:
Check out the BRAND NEW ICON T10 Scan Tool video here - th-cam.com/video/vqpJci64Ahs/w-d-xo.html
If you have not seen our ICON T8 Scan Tool video definitely check it out here - th-cam.com/video/PrgS3MONORQ/w-d-xo.html
See the ICON T8 Scan Tool here - www.harborfreight.com/brands/icon/diagnostic-testing-scanning/diagnostics/t8-professional-intelligent-diagnostic-scanner-57740.html
Be sure to check out the T10 & T8 Scan Tools on harborfreight.com and in-store here - www.harborfreight.com/brands/icon/diagnostic-testing-scanning/diagnostics.html
We have had both the ICON T8 and the ICON T10 for a bit now and made a comparison video; want to hear our frank thoughts and what we like and do not like about each unit? Be sure to check out our conversation here - th-cam.com/video/ypDDe3A8Zaw/w-d-xo.html
Get your muscle car, hot rod and more ready with Rapid Dry Towel! UNLOCK SAVINGS at our exclusive Fresh Vintage link here - rapiddrytowels.com/?ref:thefreshestvintage
This game changing wash & dry system can dry an average sized car without having to wring out the towel! After years of searching for a chamois to dry cars without wringing out we came to the conclusion: it did not exist, so the Rapid Dry Towel team invented it!
Thanks for watching!
For $299.00 this is very impressible with SO MUCH data at your fingertips including wiring diagrams, removal and re-install procedures, Tech Service Bulletins (TSBs), fluid capacities & specs, torque specs and so much more - you MUST SEE what Harbor Freight has done with this software!
If you have not checked out our ICON T10 and T8 Scan Tool Videos be sure to do so below:
Check out the BRAND NEW ICON T10 Scan Tool video here - th-cam.com/video/vqpJci64Ahs/w-d-xo.html
If you have not seen our ICON T8 Scan Tool video definitely check it out here - th-cam.com/video/PrgS3MONORQ/w-d-xo.html
See the ICON T8 Scan Tool here - www.harborfreight.com/brands/icon/diagnostic-testing-scanning/diagnostics/t8-professional-intelligent-diagnostic-scanner-57740.html
Be sure to check out the T10 & T8 Scan Tools on harborfreight.com and in-store here - www.harborfreight.com/brands/icon/diagnostic-testing-scanning/diagnostics.html
We have had both the ICON T8 and the ICON T10 for a bit now and made a comparison video; want to hear our frank thoughts and what we like and do not like about each unit? Be sure to check out our conversation here - th-cam.com/video/ypDDe3A8Zaw/w-d-xo.html
Get your muscle car, hot rod and more ready with Rapid Dry Towel! UNLOCK SAVINGS at our exclusive Fresh Vintage link here - rapiddrytowels.com/?ref:thefreshestvintage
This game changing wash & dry system can dry an average sized car without having to wring out the towel! After years of searching for a chamois to dry cars without wringing out we came to the conclusion: it did not exist, so the Rapid Dry Towel team invented it!
Thanks for watching!
มุมมอง: 213
วีดีโอ
The ICON TrueFix Software Exclusively from @harborfreight Tools is INCREDIBLE!
มุมมอง 12Kวันที่ผ่านมา
Today we are checking out the BRAND NEW ICON True Fix Software Exclusively by @harborfreight Tools! For $299.00 this is very impressible with SO MUCH data at your fingertips including wiring diagrams, removal and re-install procedures, Tech Service Bulletins (TSBs), fluid capacities & specs, torque specs and so much more - you MUST SEE what Harbor Freight has done with this software! If you hav...
Which One is Right for You? 🤔 ICON T10 and T8 Scan Tools Comparison by @harborfreight Tools
มุมมอง 2.2Kวันที่ผ่านมา
Which One is Right for You? 🤔 ICON T10 and T8 Scan Tools Comparison by @harborfreight Tools
You Need to See the ICON T10 Scan Tool - Exclusively by @harborfreight Tools!
มุมมอง 57Kวันที่ผ่านมา
You Need to See the ICON T10 Scan Tool - Exclusively by @harborfreight Tools!
BEST Budget Bluetooth Scan Tool? We Find Out! THINKCAR BD6 Test
มุมมอง 14314 วันที่ผ่านมา
BEST Budget Bluetooth Scan Tool? We Find Out! THINKCAR BD6 Test
SEVEN Reset Functions & FCA AutoAuth?! Launch CRP123i Scan Tool Overview
มุมมอง 28621 วันที่ผ่านมา
SEVEN Reset Functions & FCA AutoAuth?! Launch CRP123i Scan Tool Overview
Easy TPMS Fixes! OTOFIX Tire GO 808 TPMS Service Tool Review
มุมมอง 1.3Kหลายเดือนก่อน
Easy TPMS Fixes! OTOFIX Tire GO 808 TPMS Service Tool Review
FASTER Tire Changes with John Bean PRO SPEED Tire Changer? We Find Out! #tires #tirechanger
มุมมอง 79หลายเดือนก่อน
FASTER Tire Changes with John Bean PRO SPEED Tire Changer? We Find Out! #tires #tirechanger
BEST Beta Test We've Tried! TopDon CarPal Scan Tool Beta Test & Overview #obd2
มุมมอง 3862 หลายเดือนก่อน
BEST Beta Test We've Tried! TopDon CarPal Scan Tool Beta Test & Overview #obd2
Turn More Alignments FASTER with CEMB Argos! #shoptools #alignment
มุมมอง 362 หลายเดือนก่อน
Turn More Alignments FASTER with CEMB Argos! #shoptools #alignment
RANGER GoCarts - You NEED THESE in Your Shop! #diy #fixed #portable #shoptools
มุมมอง 292 หลายเดือนก่อน
RANGER GoCarts - You NEED THESE in Your Shop! #diy #fixed #portable #shoptools
YOUR NEXT BBA SCAN TOOL! - LAUNCH X431 Elite BBA Scan Tool Unbox & Review #scantool #obd2
มุมมอง 2833 หลายเดือนก่อน
YOUR NEXT BBA SCAN TOOL! - LAUNCH X431 Elite BBA Scan Tool Unbox & Review #scantool #obd2
YOU NEED THIS Glovebox Code Reader! THINKCAR ThinkOBD 100 Unbox & Review #obd2 #obd2scanners
มุมมอง 6813 หลายเดือนก่อน
YOU NEED THIS Glovebox Code Reader! THINKCAR ThinkOBD 100 Unbox & Review #obd2 #obd2scanners
WE GAVE THESE IMPACTS A WHOOPIN' - Here's How it Went! #impact #diy #shoptools
มุมมอง 8724 หลายเดือนก่อน
WE GAVE THESE IMPACTS A WHOOPIN' - Here's How it Went! #impact #diy #shoptools
BETTER THAN AN AUTEL? 🤔 MS309 Overview #obd2 #checkenginelight
มุมมอง 1.7K4 หลายเดือนก่อน
BETTER THAN AN AUTEL? 🤔 MS309 Overview #obd2 #checkenginelight
WHO ARE THE CELEBRITIES?! 😮 Rotary Booth Walkthrough at SEMASHOW #carlift #rotary
มุมมอง 854 หลายเดือนก่อน
WHO ARE THE CELEBRITIES?! 😮 Rotary Booth Walkthrough at SEMASHOW #carlift #rotary
FASTER DIAGNOSIS with KAiWEETS! Battery Tester & Smart Multimeter #multimeter #batterytest
มุมมอง 1K5 หลายเดือนก่อน
FASTER DIAGNOSIS with KAiWEETS! Battery Tester & Smart Multimeter #multimeter #batterytest
We Gave These Things a WHOOPIN' 😮 Cordless Ratchet Challenge!
มุมมอง 7K5 หลายเดือนก่อน
We Gave These Things a WHOOPIN' 😮 Cordless Ratchet Challenge!
Car Battery Testing via Bluetooth?! 🤔 OTOFIX BT1 Lite Unbox and Overview
มุมมอง 2475 หลายเดือนก่อน
Car Battery Testing via Bluetooth?! 🤔 OTOFIX BT1 Lite Unbox and Overview
The Temu Scan Tools to NOT BUY! (Battery Tester is Solid Though!) Temu Surprise Scan Tool Unboxing
มุมมอง 1.7K6 หลายเดือนก่อน
The Temu Scan Tools to NOT BUY! (Battery Tester is Solid Though!) Temu Surprise Scan Tool Unboxing
WE FOUND SURPRISE INTAKE LEAKS! 😳 Harbor Freight ICON Diagnostic Smoke Machine Unbox & Test
มุมมอง 7K6 หลายเดือนก่อน
WE FOUND SURPRISE INTAKE LEAKS! 😳 Harbor Freight ICON Diagnostic Smoke Machine Unbox & Test
Can the MUCAR CDE900 Cover all Your Scan Tool Needs? We Find Out! Mucar CDE900 Unbox and Overview
มุมมอง 9866 หลายเดือนก่อน
Can the MUCAR CDE900 Cover all Your Scan Tool Needs? We Find Out! Mucar CDE900 Unbox and Overview
If you have a Honda or Acura YOU NEED TO SEE THIS - Launch Creader Elite Scan Tool Unbox & Review
มุมมอง 1.1K7 หลายเดือนก่อน
If you have a Honda or Acura YOU NEED TO SEE THIS - Launch Creader Elite Scan Tool Unbox & Review
If You've Never Heard of Xtool WATCH THIS VIDEO! Anyscan A30M Unbox and Overview
มุมมอง 5K7 หลายเดือนก่อน
If You've Never Heard of Xtool WATCH THIS VIDEO! Anyscan A30M Unbox and Overview
HARBOR FREIGHT Sells Scan Tools Like This?! Check it out with us at #semashow2023
มุมมอง 5K7 หลายเดือนก่อน
HARBOR FREIGHT Sells Scan Tools Like This?! Check it out with us at #semashow2023
NOT YOUR FATHER'S HARBOR FREIGHT! Powerful Icon Series T8 Scan Tool Unbox and Overview
มุมมอง 50K7 หลายเดือนก่อน
NOT YOUR FATHER'S HARBOR FREIGHT! Powerful Icon Series T8 Scan Tool Unbox and Overview
Anyone with a Smartphone has an Instant Scan Tool! TopDon TopScan Pro Unboxing and Overview
มุมมอง 4.8K8 หลายเดือนก่อน
Anyone with a Smartphone has an Instant Scan Tool! TopDon TopScan Pro Unboxing and Overview
Are Either of These Worth Your Hard Earned Money? - Ancel AD310 vs.Motopower MP69033 Scan Tools
มุมมอง 6K8 หลายเดือนก่อน
Are Either of These Worth Your Hard Earned Money? - Ancel AD310 vs.Motopower MP69033 Scan Tools
How is this a BEST SELLER?! We Investigate - Ancel AD310 Scan Tool Unbox and Overview
มุมมอง 2.9K8 หลายเดือนก่อน
How is this a BEST SELLER?! We Investigate - Ancel AD310 Scan Tool Unbox and Overview
Why is this a BEST SELLING Code Reader on Amazon? We Find Out - Motopower MP69033 Unbox & Review
มุมมอง 3.4K9 หลายเดือนก่อน
Why is this a BEST SELLING Code Reader on Amazon? We Find Out - Motopower MP69033 Unbox & Review
Oh boy..I can see a hacker special here! Instead of Start/Stop, it should say On/Off. Looks like you did the update, or at least I don't see the red "2'. Updates should be the first thing you should ALWAYS do! If you watch: South Main Auto, he knows how to use the tool, and display schematics!!
I think if this is the only software a professional will have, then it would need to have labor times.
Can it read Dodge Ram vehicles? I used Autel Ultra 1 and it doesn’t work on newer Ram trucks
The software is launch x431 same
$1600.00 from harbor? I will trust my Autel for $1600.00 before Harbor gets my money!
they said "forgive the joke" but.. it really needs to be said haha I can already see someone trying to charge the battery with these.
Yep for sure 😁 😂 Thanks for watching and Subscribing we do appreciate it!
Batteries are the Problem, they are no better now than they were in 1920. My saw won't even rip one two by four 8 ft long and is dead halfway through. What a rip off. I paid one dollars for a saw and batteries.
We were surprised at how long these batteries lasted in these cordless ratchets! They will definitely go the distance in a normal day-to-day use (we were just whooping on them to see how they would hold up 😂)
Craftsman gone, only the name remains, pay for what you get
good review!
when do coupons usually come about ?
Thank you for watching and subscribing to Fresh Vintage Garage we do appreciate it! I'm not actually sure if you can use coupons on these?
i would love to have labor hours rolled into my service data, as a mobile mechanic, its hard to train my guys to use 6 different apps to get parts, labor, and soon to be tech data
BE EXTREMELY CAEFFUL BUYING FROM HARBOR FREIGHT. I bought one of the $800 ZR Pro scanners, and had to exchange it. I followed Harbor Freights shipping instructions, including using their Fedex provided label. Someting happened during the shipping process through Fedex, and Harbor Freight said there was nothing they would do. So I'm out an $800 ZR Pro scan tool. BTW the one they shipped me said "STORE DEMO ONLY" which was the reason for the exchange... I will NEVER buy from Harbor Freight again (and have been a customer of theirs for decades).
Topdon Phoenix Plus or above and the Launch Pro3S+ or above are better and way less money. Both ICON scan tools should be half the price they are to be competitive.
These are both just Launch scan tools. There are better scan tools for the money out there.
I have autel,launch and a icon t8 one of my fellow techs has a snap on solus the t8 can go head to head with my smaller launch x431 and both are very similar the graphs on the t8 are a little better than the x431 but not as good as my larger x431 pro to me both launch and the icon blow away the autel I have but the autel does tpms and its used heavily for that in our shop.
Plus it’s china fuck harbor freight tools
Why didn't you wait for the active data to come on line ? It will do this and that and this and that someday ? Really ?
Hi thanks for watching! Which active data are you referring to? If you mean the TrueFix software that wasn't available at the time of the recording of this video, however we have a separate video on the TrueFix software subscription, what all it includes, and an overview of some of the information including wiring diagrams, special tools and more that you can find in there - make sure you go check it out on Fresh Vintage Garage 👍
I NEVER BUY a physical item that requires me to then buy a FREAQUIN SUBSCRIPTION TO PAY ENDLESSLY FOR WHAT I OWN AND HAVE PAID FOR. YOU ARE ONLY RENTING THIS CRAP.
I have and shoot a 6.5-284 and love it. One hole groups are the norm. Inherently accurate cartridge. My 26” barrel loves anything that’s going 2920 fps. Only get there with hand loads.
I bought this obd. It doesn't read IMA in Hondas.i checker with 3 vechiles same problems
I will stick with my xtool d9s.
We've tested X-Tool units and have them on the schedule to launch the videos here soon; X-Tool is a definite up and coming brand that many people do not know of in the United States 💯
You would be hard pressed to find a better scan tool to do immobilizer and PID recovery than the xtool d9s
Seems like another scanner that has all kinds if intended options that may work someday... And then they never get it working and this thing gets stuffed into a corner of the garage and not used. Big disappointment. Tpms doesnt work, truefix doesnt work,, wiring schematic doesn't work, oscilloscope barely works.. im not buying one until it is refined. Until then, it's just a dream. Bi directional? I bet it's really limited. They should have worked these out before releasing it. I have a stack of scan tools that did the same thing to me.
Sounds like you need to stick with the tried and true paper clip method of getting your OBD2 codes my friend 😂 Please watch the full video and then reply to my comment thanks so much for checking out Fresh Vintage Garage 👍
Dose it include connector pinouts, connector locations? Are the diagrams all redrawn, in other words dose it show all connectors in circuits.
Pretty sweet system! Does icon have a unit that would be good for a guy that just needs one here and there for personal vehicles?
They are coming out with a T7 in October. Be on the lookout for our overview video of that unit in a few months! Thanks for watching and subscribing! 👍
@FreshVintageGarage Thank you for your prompt response. I'll definitely keep an eye out for that vid. Have a nice day.
21:48 I think ima hold off the t10 until there able to support toyota
Thank you for watching and for subscribing to Fresh Vintage Garage we do appreciate it! While we didn't get the exact details Harbor Freight did confirm they're working with Toyota (and I'll stand by what I said in a video saying this is probably on Toyota's side and not HF) 👍
I would imagine there is a subscription service you would need to eventually renew just like any other scan tool.
You're exactly right - zero (like none) of the OEM car manufacturers give access to their proprietary software away for free. I'm still blown away everyday by how many people on the internet seem clueless to the fact that the subscription fees on these scan tools are simply just to cover the costs of what the vendor has to pay to gain access to the OEM proprietary software. We thank you for watching and checking out our channel!
looks an awful like autel🤔🤔
So it's a fancy obd2 scanner... what does it actually do, can it be used to tune or adjust programming/update the newer 23' 24' vehicles?
None of the generic scan tools can tune or program. Those are all manufacturer specific
Thanks for watching! This is not a tuning scan tool; like the other commenter here mentioned this is a code reader, data graphing, bi-directional control, and diagnostic scanning tool of the existing settings that are in the vehicle, and no tuning capability 👍
Hello, why is Toyota not included?
Thanks for watching and Subscribing to Fresh Vintage Garage we do appreciate it! It's actually a great question...we are not sure as to the exact answer, but we're going to definitely double-check with Harbor Freight to confirm.
how does this happen...I just bought the T8 last weekend OMG....I mean I love it and all but the T10 looks nice.
Wow! How do you like the T8 so far? Given the TrueFix software is included with the T10 does that help bridge the gap enough for you to consider returning the T8 and buying a T10 to get the Topology and more?
Has to have a subscription to work. That sucks.
You're exactly right - zero (like none) of the OEM car manufacturers give access to their proprietary software away for free. I'm still blown away everyday by how many people on the internet seem clueless to the fact that the subscription fees on these scan tools are simply just to cover the costs of what the vendor has to pay to gain access to the OEM proprietary software. We thank you for watching and checking out our channel!
@@FreshVintageGarage I own an OBDII scanner from Amazon. I can use it on any of my vehicles and have had it for 5 years. Cost $60. NO SUBSCRIPTIONS. Has identified every problem that was not pure mechanical on my Chevy vans and Ford RangeR. Same on wifes Toyota. Clearly this expensive subscription device has some value for commercial users who work on dozens of vehicles daily. But any subscription requirement will push casual users away from the system entirely. IF it were configured with the systems data and you are only charged if you CHOOSE to get an update for newer car models or whatever, it should be entirely optional and should work out of the box and continue to do so for the system as shipped for its functional lifetime. Just like a wrench. F these pirates. I only pay once for something I OWN. THIS IS A RENTAL PROGRAM DISGUISED AS A SALE. Stop paying and YOUR EQUIPMENT won't work. They are acting like a government agency. (KEEP PAYING OR WE TAKE YOUR HOUSE!)
Should include labor
Thanks for letting us know! We are going to gather all of these comments and send them over to Harbor Freight 👍
Uh big question if after the 2 yr subscription is the software bricked? I guarantee it it is and cant function
This will still function as a code reader and give you live data graphing capabilities without the software subscription 👍
Fresh Vintage Garage... Cool video. I would like to have both of them.
Thanks for checking out the ICON series! They are awesome to use and work well ☺️ Stay tuned as we're not sure of the exact timing, but the consumer version ICON T7 scan tool is going to be released here later this year! Please consider Subscribing too we really appreciate your support and patronage 👊
A few questions. Will it do transmission relearns on Subaru's? What about eyesight calibrations on the subaru's? And lastly, will the T10 still work like normal even after the subscription expires and I dont renew the subscription?
Thanks for watching! We'll put all these questions into an email and send them to the ICON team and let you know ☺️
I have to agree with others regarding the need for “Labor Times”. That would really make this a complete package. Did Harbor Freight say Labor Times is something coming in the future?
Thank you for watching! Right now Harbor Freight is focused on the "Fix" side of things from what they told us; if we get a million people demanding the labor times in the comments we will put them into one gigantic email and send them over to HF and see what happens ☺️ Please consider subscribing to Fresh Vintage Garage too we do appreciate it!
The company they are using for the manuals does offer labor times, wouldn’t be surprised they offer it in the future. Tho not very important when they are targeting DIYers and using a low cost subscription
Does the ICON software have CAN BUS drawings? Have you tried troubleshooting CAN BUS?
I like the look so far, but I would also definitely have to have labor times to ditch alldata for this.
Thank you for watching and sharing your thoughts below we do appreciate it! We're going to put all of these into one combined email and send to Harbor Freight here soon 👍
The reality is a scan tool is only a means of communicating with a vehicle. Codes and part numbers are not the same thing.
Can I buy this software without having an icon scan tool?
Thank you for watching and checking out the TrueFix software! I believe so as the requirements show a Harbor Freight account but no actual need for an ICON scan tool. Thanks for Subscribing too! Help us build the best scan tool and shop tools/equipment channel around 😊
@@FreshVintageGarage Yes you can. Go to HFT and look for TrueFix. The T10 is sold with it or you can buy it separate for the T8 or Stand alone.
Will the t10 cover 2023 models
Yes it will - I was looking at 2024 model wiring diagrams in the TrueFix software a few days ago too 👍
There are more Toyotas on the road than any other car, not to be included, no good.
Yeah we are scratching our heads on this one too 🤔 thank you for Subscribing to our channel too!
No Labor times is a deal breaker for me. I'm a mobile mechanic and have to have it
Thanks for letting us know we do appreciate it, and thanks for watching too! Can we ask what are you using now for a scan tool for doing mobile repairs? I'm actually very curious to know what's the sweet spot scan tool wise for you when working mobile?
@@FreshVintageGarage I've been using a autel scan tool and it's getting older and looking to purchase a new scan tool.
What happened to Saturn, not on the list. Bummer!
Thank you for watching! I'm assuming it's under GM, but we can check and let you know 👍
Too bad TrueFix doesn't support Toyota or Lexus models.
Yeah no idea on that part either 🤷♂️ Thanks for watching and Subscribing to Fresh Vintage Garage we do appreciate it 😊
U know what that means when they say to stick around to the very end of the video. When they say that, i just stop right there and watch something else.
Just to be safe you should delete the TH-cam app off your phone so you never have to hear someone say stick around to the very end of the video 👍 But in all seriousness thanks for watching we really appreciate it ☺️
If HF keeps progressing at this rate, they are going to start putting tool trucks out of business (UNLESS they drastically change their profit margins). If they get the Labor Times working well and their scan tools can work with Launch or ThinkCar accessories OR HF offers those accessories under the Icon name, they will be a force to be reckoned with. They HAVE to at least be compatible with an oscilloscope, offer IMMO programming, and a TPMS tool. All of those tools are already on the market, so the hardware is done, it is just a matter of compatible software. With all of that said, the price is too high. That T10 is a $700 tool under other brands. Those brands don’t come with Truefix of course, so add $300 to that $700 and the T10 is a $1000 tool. Unless they offer a $600 off coupon, I’ll be sticking with my Kingbolen K10. It took a lot of research for me to find that the K10 was the best bang for the buck in that price range though. For the guys that don’t want to research the wide world of scan tools, for the best value, the T10 looks like an easy pick. It is much easier to decide between the Icon T8 vs. T10 than it is to figure out the differences between the ridiculously named Launch X431’s.
I checked my Harbor Freight today (08/20/24) and the T7, T8 & T10 are available. I’m going all in on their T10 just as soon as a coupon becomes available (if I can wait). I think I’ll take advantage of their 0% as well.
T7 is launching in October. Thanks for watching and subscribing! 👍
Hello, I think your video Hello, I think your video content is too rich and real and interesting, I think it is really my honor to pay attention to you, I appreciate your explanation very much, I hope you can explain and recommend more and more good products in the future videos, I also used a very good product recently, because my family's car has been used for too long. As a result, last time I took my family on a trip, I was stopped on the halfway road. Fortunately, I always prepared a car smoke detector, found the problem and fixed it immediately, so I didn't waste a lot of time on the road. My family praised me for my great work, and I think my choice of products helped me. The powerscale M3 smoke machine leak detector is very good from amazon ,The key is that the quality is stable, the functions are complete, and the price is also favorable. I also recommend you to try to show the operation of this product. Perhaps your other fans love your interesting explanation and recommendation as much as I do, and have been supporting you
Hello thanks for watching! We've actually reviewed the Harbor Freight made in US smoke machine they sell, but have never heard of Powerscale; Do you happen to work for them?