- 5
- 31 879
Buckethead
เข้าร่วมเมื่อ 24 มี.ค. 2012
วีดีโอ
Vinyl soffit corners! Easy!
มุมมอง 18K4 ปีที่แล้ว
This video shows a way to miter your vinyl soffit even with no “H” channel. The contractor we’re doing this job for did not send any, so we had to improvise. Lots more to come, and videos WILL get better! Thanks for watching!!
Thanks for the video. Definity helps those who are learning. Keep up the good work friend.
Best video I've seen so far, I gotta install this, for the first time tomorrow and I got butterflies on how to do the corners. Can I send photos to you to look at? Thanks.
Dude, that huge V-notch is not 'nice', we also don't need closeups of your face
It's like you know your on camera and making rookie mistakes.
Why go down and grab a grinder snips is way faster
Because when it is cold it cracks
He likes the exercise.
First don't even worry bout haters pretty quick and good nail line never 5 nail myself... Don't need that much stagger and don't put your gun down get a tool belt for nails knife hammer. Use nose of the gun for guide next shingle
Hammer is way too big for siding and metal work lol.
Not if you know how to use it.
@@buckethead1928 Didn't you hit and break the j channel?
@@Phoenixrising8313 lol I did hit it but it didn’t break. And I seen that after I replied to your comment 😂
Your joking right?
This is not the way to do that
It'd be a great look with the cutout angle reduced so the final gap was closed up. Loved the concept, the guys.
I like it! I will be doing this on my house. Thanks and be careful on those ladder jacks lol
Thanks for the video 👍
I watch a lot of videos online of people Roofing they must not be from a hot State most of the time the shingles out here get a hundred eighty degrees and if you're not wearing gloves after 40 squares your fingers are going to be gone. Roof however fast you want I choose quality over speed the speed comes with knowledge. Who gives a shit what ppl say most of them dont have a hard job so their opinion is shit!
I agree. I used a thermometer on the bundle I was laying and it was 187 degrees on an 85 and sunny day.
@@buckethead1928 i live in Colorado its been high 90s all summer
Clean! -Will
Helpful video, but you could set a better example for safety. No guard on your grinder, no eye or ear protection.
You’re right, thanks for the comment!
Real men don't need safety
@@vin4301How would you know? Did you ask one?
The safety sqint and selective hearing are a close second to glasses and ear plugs.
Most workers dont put a guard on their grinder. It gets in the way. Professional grinder cutters like me know how to use the grinder safely without guards.
Come on bro u have no chance in hell
I'm not sure if you want it to look that way on a 45 miter. I simply make a 90 degree cut then bend it in on itself so the face of the f (or j-chanel) just has an overlap. (much the same as j-channel on a gable peak). Bonus look would be to take your knife and slice off the inside of the hem for a tighter outside miter. This would be acceptable if the exterior is getting brick as it would be hidden but for a normal outside corner the gap would show.
Don't do a challenge if you drop the nailer you slow af, maybe your quality is good post about that not a challenge you ain't got it
Lol I won the challenge buddy. Got $50 for it. Do your research maybe. Also, I have out roofed everyone I’ve ever worked with and been roofing my whole life. I’ve made a fortune and run a roofing business. I think I got it.
I didn’t make the challenge. I posted my video to the guys channel that made the challenge and won.
Bum doesn’t even use ice and water shield, and he’s 4 nailing some and 6 nailing others. No consistency. You can be as fast as you want if you’re going to do a shit job it won’t matter how fast you got it done.
5 nailing first of all. I hit the one at the end when I come back so I don’t have to reach. Ice and water shield isn’t required. We use it in valleys or around obstructions. Lastly, this is a garage, they didn’t want it. Nice try though! Love you too!
Not shabby at all...gota work on the one hand grab and place technique
It would've been faster and easier just to install that vent as you roof that spot
Not in the slightest.. I’ve done it every way you can do it. There now way it’s faster to cut it in as you’re roofing. Especially if you get paid per square and need to get the shingles laid or if you need to get the house dried in.
Looks like you took longer than was necessary to install that vent at that location. One thing tho , is that type of technique doesn't guarantee water from running off of the flange onto deck underneath the shingles. So it's not even 100 % waterproof
It absolutely doesn’t go under shingles and they’re installed the same as if you cut them in as you went. You’re an idiot.
@6:05- why didn't that one get a nail at the far right?
I nail the ends when i get back to the bottom so I don’t have to reach. Makes it a little faster
All i have to say to that is one square is nothing should be doing a .forty square job with one man then see what you have or a 80 square one man
Lol oooohhhh good one! Sounds like a great plan!! That makes perfect sense, I wish I would’ve thought of such a wonderful idea!!
I shingled for yrs... I like the sound of the gun going off.. Looks great Brotha..
So.... How many times did you have to hit those nails to drive them in? Seriously, I'm glad I'm not working ouside in these cold months anymore... You Youngsters can have at it ... LMAO
Lol I know that was terrible, didn’t want to hit the F again hahahaha
Yeahhhhh may dude! 3:35 pounds down a nail! Good to see! Installation is solid... We all shingle as fast as we can. Dudes just mad out there not posting videos... Lol haters gon' hate!
Nicely done! Can't you just loosely nail around that so you don't have nails to pull though?
Not supposed to nail where bent goes, that’s why I said one of my guys messed up lol supposed to leave nails around vent out until after you put it in.
Good time but you’ve been beaten already best time I seen on a square is 4:00 minutes
Damn that’s killer! Where did you see that?? I wanna watch it. I can do faster than this video, rushing and being on camera slowed me down a little. But I don’t think I could ever do 3 bundles in 4 minutes unless it was a 3 bundle run and everything was laid out. We had to open each bundle on video.
This shit is not rocket science,, give it a rest,,, if you do this for a living , you’ll figure out a way to get quicker,,, this bragging stuff is insane,, who cares
Garbage
Keep doing what you do and screw the haters.
Looks real average, I’m 58 years old and I know for a fact I can shingle faster then that!! Not kidding, why in the world would you put out a challenge like that???
I didn’t create the challenge, but where’s your video doing it faster?
Shingle Master well I have a family, I’ve had my own business for thirty eight years, and I don’t run around bragging about my shingle speed, I have a large Johnson so I don’t feel the need to brag about my shingling, there are guys that work for me that are fast as well, but I do not lose any sleep over it, thanks I’ll be here all week
Ok, boomer
Shingle Master who cares if you post a video ,,, All your showing people is that you like to brag about something as mindless as shingling, there are a hundred other things in life to brag about, other then shingling, I’m sorry that I offended you by saying your speed was average,, if you check out some other guys videos,, They are super fast, but if someone wants to put on their tombstone , I was a fast shingler, that’s your problem
First off , Love that song in the background that started the video. You're a good shingler. Not sure why ppl are mentioning your nail pattern? I thought it was great. I would suggest not sharing this video with the homeowner tho / no ice guard.
On a side like this there is no need for Ice and water shield
Good job 👍🏽 ‼️N FUCK ALL HATERS
Good job! Put that 50 towards some beers for your crew on Friday
I love this s, 80' runs w my ear buds on..time dissipates
Please hold the camera in a horizontal position. You will have videos that are much more enjoyable to watch. Please take note that this is not a complaint or a thumbs down by any means, but just a friendly suggestion that will definitely get more subscribers. Nice video, and yes, I left a thumbs up !!
I appreciate the feedback, I will make sure my guy switches it up. We’re a little new to the video world! Thanks again!
Curious. Why do I keep see vents to in after the side is shingled? Are the vents still at the roof supply? Is it faster? Is it cleaner? I’ve always just put them in and came back to trim the shingle around after it warms up a bit but I’ve never chose to shingle over vent holes. And what if your laborer or something steps there wout knowing or even a homeowner. Idk. Just trying to understand. The final install was very clean loookjng tho. Watertight most likely
Jerry Walker it is much faster and easier to roof over them, and cut them in after. The vent holes are usually small enough that with the paper plus the shingles over them, a quick step wouldn’t go through. We mark them and make everyone aware of where they are at. Also, we normally cut them in same day, and homeowners are advised not to be on roof during process- or at all really. Once we install a roof we warranty it, therefore any traffic after it’s installed should be by us to ensure it doesn’t get damaged. If you use the tricks ive showed and explained, you would likely realize it’s much more effective this way. However, to each their own, just giving options!!
You should take that world's fastest shingler name along wit that 50$An thank God somebody shut that arrogant fuck up! Good job 👍
Nice bro👍👍
Damn you'd think everyone was a roofer if you read the TH-cam comments. Good job bud
Lol and guarantee they’re not! 😂🤘
Good work brother! Roof on! 💪🏻
hahaha dustin you could've told me the hater herd was here! I was gonna warn you but seems like you got it under control. quiet night for me kind of enjoyed it lmao thanks!
first to tour comment whatt!?
😂 I already expected it, doesn’t bother me a bit lol. I appreciate the shoutout big dog! Glad to keep them busy
How can you hate such beautiful work?! Killin it! 💪🏻
For everyone talkin shit, my nails are where they go and i sent Zach a video and pictures lifting the shingles up and showing where the nails are. But most of all... where’s your video? 🤘
Nice man
The thing is we all can sit here and tell him what he is and isn't doing right keep up the good work man hates off to ya
I don't like to hate so..... Bye
Would not wanna be that homeowner.... Shame. Enjoy ur 50$
Lmao man STFU there's nothing wrong with that roof youre a drama queen bud
@@MaizeTheGamer_VR nothing right with it either.
Nail to close to stager.......... nails even in the stager...... wow.
Anyone can bust ass for ten minutes. Keep standing for two decades and see how that works out for ya. Nice and smooth though. Good job on one square.
Ok boomer jr.
Nice job!
That second nail needs to be shot more to the left so its not right at the seam cmon bro