วีดีโอ

First of all, thank you very much for your comment!!! Yes, in this case, the sharpening stone attached to the drill performed better. However, the traditional method isn't bad either-it just requires more effort than I demonstrated in the video. Both options work effectively. Thanks for watching!!!

@typhoontim125. First of all, thank you very much for your comment!!! In my opinion, these drills offer excellent value for the price. The smaller one is particularly useful for making more precise holes due to its lower impact power. Each tool fulfills the purpose it's designed for, as I mentioned in the video-everything depends on what you need it for. For DIY projects, hobbies, and personal use, I highly recommend them. If I made a living using them, doing daily heavy-duty work, I might opt for a different brand, but this one strikes a great balance between quality and affordability for its intended use. The issue is that many people expect high-end performance from budget tools, which isn’t realistic. If you found video useful, please consider subscribing to the channel if you haven’t already. Your support really helps and motivates me to keep creating content!

@vjrh6284. First of all, thank you very much for your comment!!! That’s a great option I hadn’t considered, but with a bit of care, it should work perfectly. Thanks for the advice!

@KamranGee-w1t. Unfortunately, newer production models don’t include wiring for the standard versions. To cut costs, wiring harnesses are only provided in the higher-end models.

@KamranGee-w1t. First of all, thank you very much for your comment!!! I understand exactly what you're talking about, and it seems to be an issue specific to newer models that come as standard or basic versions. I have a Skoda Octavia 4, which I bought in February this year, and I’m facing the same issue. Since it’s a base model, it doesn't include wiring for the door lights. There is an option to create a circuit from the fuse box, but since my car is still under warranty, modifying it would void the coverage. In the meantime, I'm considering purchasing door projectors that run on their own batteries. I’ve seen a version that lasts about a month before needing a recharge. While it's not ideal, it’s my best solution for now. However, if you have access to a car electrician, they could help set up a circuit through the fuse box. If you found this information useful, please consider subscribing to the channel if you haven’t already. Your support really helps and motivates me to keep creating content!

@type3666. Salut!! Da, încă un clip cu Damas. Ma bucur mult pentru ca încă ești fan al acestei mașini. Tu ce ai mai reușit sa faci cu ale tale?

@Xeyedjohn. First of all, thank you very much for the comment!!! While it's not a particularly complex process, a video can make it much easier to follow. I truly appreciate your kind words-it’s support from people like you that motivates me to keep creating and sharing new content. If you'd like to see more upgrades or improvements on this car model, be sure to subscribe if you haven’t already. And if you have any suggestions for future videos featuring this car, feel free to share them with me-I'm excited to hear your ideas!

@danielpluckrose8994. First of all, thank you very much for the comment!!! Unfortunately, I didn’t record this particular process, but it’s fairly straightforward. Generally, I slightly loosen the flange to create space for the compressed air gun to fit between the part and the mold, then I blow a significant amount of compressed air. The part usually comes off almost instantly-assuming the wax and polyvinyl alcohol were applied correctly. It’s crucial to consider how many curvature part have; the more there are, the more challenging it can be to release the part. Also, the catalyst percentage must be optimal. If it's too high, it can cause a violent reaction, generating excess heat and forming tension points in the laminate, which can lead to the part sticking, especially in the corners. If you don’t have access to a compressor, you can use a rubber hammer to gently tap the part until it loosens. Then, insert wedges between the flange and the part to help it come off completely. If you found this explanation helpful, feel free to subscribe to my channel-your support motivates me to keep creating valuable content!

@adix076. Thank you very much!

@kyiannos. First of all, thank you very much for your comment!!! This is the item number 100363956, and it costs approximately 20 euros, including shipping. There is a more affordable version available for around 10 euros, but it doesn't include wireless charging. I personally recommend this model, though it's important to note that the charging speed may be slower than with a standard charger. However, I find this charger incredibly useful, especially during extended periods without electricity. With several accumulators providing over 60 amps of capacity, I can keep my phone and other devices charged, even if there's no power for a week. If you found my answer helpful, I’d greatly appreciate it if you subscribed to the channel (if you haven’t already). Your support motivates me and helps me continue creating content!

@horiabass. First of all, thank you very much for your comment!!! Its power is 12 AirWatt, (3,5 kPa). If you found my answer helpful, I’d greatly appreciate it if you subscribed to the channel (if you haven’t already). Your support motivates me and helps me continue creating content!

@JonJon-fu8qz. First of all, thank you very much for the comment!!! I’m aware of that small access cover, but unfortunately, when the wheel arch on my car broke, I rebuilt it using fiber glass, and didn’t include that access hole. Because of this, I couldn’t film that particular version. However, I’ve received many comments explaining this method, and I’m glad people can read about this alternative way to change the light bulb. In the future, I plan to create a new video where I’ll also showcase this approach. If you found this video helpful, I’d love for you to subscribe to the channel if you haven’t already. Your support truly motivates and inspires me to keep creating content!

@nattosocial. First of all, thank you very much for the comment!!! I'm glad I could help you with this . If you found this video helpful, don't hesitate to subscribe to the channel. This helps me and motivates me enormously to continue.

@@PAFixandCrafts ok. I got it 😁

@leonservolino. First of all, thank you very much for the comment!!! While this wasn't presented in the most professional setting, I plan to conduct a much more precise test using a professional test stand soon. The samples are ready, though I haven't had time to prepare them just yet. But rest assured, it will make for a very interesting episode! If you found this video helpful, I'd love for you to subscribe to the channel if you haven't already. Your support truly motivates and helps me continue creating content!

@PierinaGuerra. First of all, thank you very much for the comment!!! I'm so glad you found this video helpful! If you have any questions, feel free to reach out to me anytime-I'm here to help. And if you haven't subscribed to the channel yet, I'd really appreciate it if you did. Your support means a lot and keeps me motivated to continue creating content!

@Alicia48818. First of all, thank you very much for the comment!!! I performed this operation once before, but unfortunately, I didn’t film it at the time since it was before I started uploading videos to TH-cam. I do plan to remove the rear part again soon, as I’m also dealing with a minor issue-a speaker that’s distorting. I’m not sure if there are particles on the membrane or if it needs to be replaced. So, I’ll need to open the back again, but I can’t say for certain when that will happen. But what I can promise you is that I will write to you when I upload this video! If you found my anwer helpful, I’d love for you to subscribe to the channel if you haven’t already. Your support truly motivates and inspires me to keep creating content!

@@PAFixandCrafts Thank you very much for your response! I also need to change the speakers since I think they are broken and they sound like plastic when I play music, I will be attentive!

@TheDonFakir. First of all, thank you very much for the comment!!! Yes, you are absolutely right in all cases. You don't have to press the drill and yes, I'm an amateur, not a professional. I use these tools as a hobby and do not earn my living with them. But we all go through a learning process and now I know how to use these drilling machines correctly.

@MrJokerh61. First of all, thank you very much for the comment!!! I find this tangential impact screwdriver to be exceptional for wooden constructions. It’s incredibly easy on the hands, and with a torque of 150 N/m, it’s more than powerful enough for any woodworking project. If you found this video helpful, I’d love for you to subscribe to the channel if you haven’t already. Your support truly motivates and inspires me to keep creating content!

@rekstok. First of all, thank you very much for the comment!!! Working with fiberglass is a true passion of mine, and I’m proud to bring over 15 years of experience in the field. While I don’t have my own workshop just yet, it’s definitely part of my future plans. I dream of opening a fiberglass workshop one day! If you ever need information or have questions about this craft, please feel free to reach out. I would love to share my knowledge with you. Also, if you haven’t subscribed to the channel yet, I’d greatly appreciate it if you did. Your support truly motivates and inspires me to keep going!

@Alllivesmatterloveeverone. First of all, thank you for your comment!!! It's not as short as it seems. It has a telescopic handle that extends quite a bit. Since it was my first time using it, I wasn't entirely sure how to get the best results. Now that I'm more familiar with this trimmer, I no longer need to bend down, and I find it very helpful. I hope you found my answer helpful! If you enjoyed this content, please consider subscribing to my channel for more tips and reviews. Your support really motivates me to keep creating content. Thank you!

@peterhiggins98. First of all, thank you very much for your comment!!! It's called polyvinyl alcohol, and it creates a water-soluble protective film. While it's not mandatory to apply if the wax has been properly applied beforehand, I prefer to use it as an added safety measure. One major advantage is that it prevents the wax from sticking to the part, resulting in a shiny and clean topcoat. If you found my answer helpful, please consider subscribing to the channel if you haven't already. Your support motivates and encourages me to keep creating content. Thank you!

@panhasambath993. First of all, thank you very much for your comment!!! Unfortunately, these remote controls can only copy active frequencies. If they don't detect a signal, they won't be able to register a new code. However, it’s possible that your remote has an identification code that could help you order a replacement remote control. Alternatively, you might find 433 MHz remote control modules on AliExpress, which you can use to replace the entire module if needed. If you found my answer helpful, I’d really appreciate it if you could subscribe to the channel. Your support greatly motivates and encourages me to keep creating content!

First of all, thank you very much for the comment!!! Don’t worry too much; the light bulb fits securely in place. To remove it, hold the bulb with one hand and gently wiggle the plug and bulb left and right while pulling the plug out. You’ll notice the bulb will start to separate from the plug. Once it’s out, simply insert the new bulb with the base facing up, then reattach the headlight. That’s it! If you found my answer helpful, please consider subscribing to the channel if you haven’t already. Your support truly motivates and inspires me to keep creating more content!

@tommasobolettieri655. First of all, thank you very much for your comment!!! In the future, I'll be making a video to show you how to change the parking light bulb and the high beam bulb, as you requested. Unfortunately, it will take a few weeks because the car is currently on loan to a friend, and I won’t have access to it during this time. If you'd like to stay updated on the new videos, please consider subscribing to the channel. Your support truly motivates me and helps me continue creating content!

@JamesWolf-l6t. First of all, thank you very much for your comment!!! There will be a second part in the future, though not for this particular car. I had to sell it as I didn't have the time to recondition it. However, I plan to post more videos focusing on working with fiberglass car body parts. If you found this video helpful, please consider subscribing to the channel. Your support encourages and motivates me to keep posting new videos!

@bigboy6969100. First of all, thank you very much for your comment!!! I have been working with resins, fiberglass and carbon for more than 15 years and have made many body kits for cars. It is a material that is easy to work with and can be repaired very well. It is light and very resistant. In the future I will try to post new clips with fiberglass body parts. If you found my answer helpful, please consider subscribing to the channel if you haven't already. Your support means a lot and motivates me to keep creating content!

@@PAFixandCraftshi I just sub can I see your body kit am a big fan of body kit

@@PAFixandCrafts do you have videos how to do carbon fiber

@owen_brennan. First of all, thank you very much for your comment!! I'm glad you found my video helpful! If you haven't already, please consider subscribing to the channel. Your support truly means the world to me and inspires me to keep creating content!

@DavidH_1914. First of all, thank you very much for your comment!!! Your feedback means a lot to me, and I will definitely take it into account for my upcoming videos.

@carminedicarlo1978. First of all, thank you very much for your comment!!! Secondly, I apologize for my delayed response. Regarding your question, I placed those blocks to keep the window securely closed; without them, the window would have fallen. Since installing this system, I haven't had any issues with the window regulator. The system is manufactured by Valeo and I ordered it from Autodoc.com. Is made in Germany,and differs slightly from the original by routing the steel breath through some tubes, ensuring it stays in place and doesn't slip off the rollers. If you found my answer helpful, please consider subscribing to the channel if you haven't already. Your support means a lot and motivates me to keep creating content!

@Belle1337. First of all, thank you very much for your comment!!! In this situation, there's no need to push the piston. The piston was pushed back to create enough space for the new, thicker brake pads. The motor is equipped with a stroke limiter that stops it at a certain load. You just need to remove the old motor and install the new one, without having to disassemble the brake caliper. If you found my response helpful, I would greatly appreciate it if you could consider subscribing to the channel if you haven't already. Also, if you have any further questions, please feel free to reach out to me anytime. Your support and engagement mean a lot to me!

@justsebas01. First of all, thank you very much for your comment!!! I'm so glad you found my video helpful! If you haven't already, please consider subscribing to the channel. Your support means a lot to me and motivates me to keep creating more content. Thank you!

Could you tell the weight of the two drills please?

@george-ev1dq. First of all, thank you very much for your comment!!! I believe these two drilling machines offer an excellent price-quality ratio. The smaller one is particularly useful for its impact power of one joule, which allows for precise holes, perfect for tasks like attaching a TV stand to a wall. The larger drill is great for making bigger holes, especially in concrete. I currently use both with 4-amp smart batteries, but I plan to upgrade to 8-amp batteries soon. If you find this information helpful, please consider subscribing to my channel if you haven't already done. Your support means a lot to me and encourages me to keep creating content. Thank you!

@caskwith. First of all, thank you very much for your comment!!! I’m currently away from home and unable to weigh them at the moment. However, I’ll make sure to get back to you with an answer this weekend when I return. Thank you for your patience!

@@PAFixandCrafts that would be greatly appreciated. I think I want to go with the smaller drill as I have a mains powered heavy SDS but if there is not a lot of difference is weight I might go for the big one. Thanks.

@vectorboy7. First of all, thank you very much for your comment!!! To cut that flap, I recommend using a cutter since its blade is thin and sharp. It's a straightforward process: gently run the tip of the blade over the thin part of the flap a few times until it comes off. If you find this information helpful, please consider subscribing to my channel. Your support means a lot to me and encourages me to keep creating content. Thank you!

@fabiomanuel3562. First of all, thank you very much for your comment!!! For my 400 square meter lawn, I rely on two 4-amp smart batteries. Right after fertilizing, the grass grows like crazy, so I occasionally dip into a second set of batteries, though they never fully discharge. I'm planning to upgrade to a set of 8-amp smart batteries to make things even more convenient. If you found this info helpful, please hit the subscribe button if you haven't already. Your support means the world to me and keeps me motivated to bring you more great content!

@hectordanielcarrasco6415. Primero que nada muchas gracias por tu comentario!!! Las llantas son de 14 pulgadas con agujeros X 100. Para ello tuve que hacer bridas adaptadoras porque este tamaño se encuentra más en los modelos europeos que en los coreanos o japoneses, como es el caso de este coche. Los neumáticos son 175 con 55 R14. Las llantas son originales BBS fabricadas en Alemania y provienen de un golf 3. Si mi respuesta te resultó útil, no dudes en suscribirte al canal si aún no lo has hecho. Esto me ayuda y me motiva enormemente a continuar. Y me disculpo por mi español. No es tan bueno!

@evenycalixto1834 First of all, thank you very much for your comment!!! I know many of you had questions about replacing the filament on the Parkside lawn trimmer from my previous video. I wanted to respond sooner, but I thought a step-by-step tutorial would be more helpful. It's actually quite easy and takes no more than two minutes! Check out my latest video to see how it's done. If you find it useful, please give it a thumbs up and subscribe to the channel if you haven't already. Your support motivates me and helps me create more content for you!

How to replace the line

@scorcher_09. Thank you so much for your comment! Changing the filament is a simple process that only takes about two minutes. To help you, I've created a step-by-step video tutorial on my channel (th-cam.com/video/5mCzwL3w0IE/w-d-xo.html). If you find the information helpful, please consider subscribing to my channel. Your support means a lot to me and encourages me to keep creating content. Thank you!

@HammusX. First of all, thank you very much for your comment!!! I know many of you had questions about replacing the filament on the Parkside lawn trimmer from my previous video. I wanted to respond sooner, but I thought a step-by-step tutorial would be more helpful. It's actually quite easy and takes no more than two minutes! Check out my latest video to see how it's done. If you find it useful, please give it a thumbs up and subscribe to the channel if you haven't already. Your support motivates me and helps me create more content for you!

@makarone. First of all, thank you very much for the comment!!! For optimal demolding, typically, a timeframe of approximately two hours it should be enough. In winter, I try to leave them until the next day to be sure that the fiberglass does not deform due to the temperature differences of the surrounding environment. It also depends a lot on the complexity of the piece and the total laminate mass. If I have a very thick part, I remove it after the first 4 layers, put the part back in the mold and apply the following layers with an hour break after every 4-6 layers of glass fiber applied, or until the temperature released by the lamination reaction drops below 30 degrees. In this particular case, after 2 hours the part was ready to be released from the mold. If you found value in this video and explanation, I'd greatly appreciate your subscription to the channel if you haven't done it yet. Your support keeps me inspired and motivated to continue sharing.

@@PAFixandCrafts Thanks for the very detailed reply!

First of all, thank you very much for your comment!!! Unfortunately, I can't figure it out, but for sure it must be a loose screw or a broken guide. I would really like to help you, but without opening the door and looking inside, I can only give my opinion, but that won't help you much. If you are from Bucharest, I could look at the car one day. If you have found the information provided beneficial, I encourage you to consider subscribing to the channel if you haven't done so already. Your support serves as a significant motivation for me to continue creating and sharing valuable content through future videos. Thank you mery much!

@808lukas1. First of all, thank you very much for your comment!!! In this video, I show how I made the mold using the old piece. Basically, I took the old wing from the trailer and made a mold on it, so that the final piece would be poured into it. I don't know if I really understood your question. but if you have other questions, don't hesitate to write to me. If you have found the information provided beneficial, I encourage you to consider subscribing to the channel if you haven't done so already. Your support serves as a significant motivation for me to continue creating and sharing valuable content through future videos. Thank you mery much!

@@PAFixandCraftsI see so you just molded around a preexisting fender flare