วีดีโอ

Faced an issue regarding my Tata Altroz AC, when suddenly it stopped working, in this video I have described the details of the problem & how I had solved it myself. Hope this video may be helpful in such similar condition on road.

This is opensource Digital FPV System known as Ruby. Using raspberry Pi & some Wifi Adapter you can make Digital FPV transmission without spending lots of money. System offers Full HD transmission, MAVLink Telemetry, DVR, Very long range transmission & also supports OpenIPC.

Complete details for making a usb powered aquarium aerator, all the components including pump, regulator etc are inside the bowl cap. Very low cost, low noise & long lasting setup.

Detailed step by step procedure to install original Fog Lamp & DRL in Tata Altroz, I have also showed the detailed procedure to prepare the wiring harness from the market available components. The entire procedure is done by me therefore presented with minute details please follow the procedure carefully this procedure & wireless operation can be applicable to any car regardless of brand. If yo...

I have shared some useful suggestions to save money on your Arducopter build using APM 2.8 without Power Module, GPS stand, bullet connectors & still get good aerial footage using low cost camera setup. You will save some weight also. Though APM is outdated but for a budget build it is sufficient to give you satisfactory result.

This is a 250 size mini Arducopter build procedure using regular APM 2.8 & other low cost components. I have tried to cover all the necessary setup procedure so that you can build your own. I have used the following components Motor- Racerstar BR1806 2280KV Propeller - Gemfan 5125 triblade Esc - Hobbywing Xrotor 10 Amp Frame - 250 size carbon fibre 3mm thk arms Pdb - Matek Flight Controller- AP...

Disassembly of WD Green 240 GB SSD to find out the main components inside. NAND Flash memory & controller all are made by Sandisk. You can see the part number in the video.In May 2016, Western Digital acquired SanDisk.

Modified a battery sprayer into automatic hand sensing hand sanitizer dispenser. I have made a obstacle sensor circuit using LM311 & IR led & photo diode & simply attached to the sprayer. You can check my previous video for the build details of circuit at th-cam.com/video/urQhdnWVwIo/w-d-xo.html This is not a paid promotion of any particular Brand.

The system is based on infrared obstacle sensor circuit using LM311, fitted in normal wash basin tap utilising solenoid valve without any module or arduino. It's very small circuit with minimal component hence constructed by joining the components directly.

A simple low cost set-up using APM 2.8 (outdated) flight controller (powered directly from BEC of the esc without power module) with M8N GPS. The Eken H9R has been mounted without gimbal just using damper to increase flight time. The quad is two years old & have taken multiple crash during initial period, despite being cheap motors it's still going strong. Using it for Agricultural field survey.

This is a 24 Volt 350 Watt brushed motor controller designed to work with the hall sensor throttle , I have utilized LM311 voltage comparator IC with MOSFET & linear voltage regulator. Entire circuit is built simply connecting all components together.You also can built it in Perfboard. Note: * Please ensure good quality heatsink with active airflow * All the power connector cable needs to be of...