วีดีโอ

Very helpful, thanks.

My car (ho da civic 2005) is jerking at 2nd gear, do I need to change these two parts?

Can I clean it with WD 40 Release Oil?

Just curious the symptoms you were having on that 1-2 2-3 shift. I’ve got inconsistent shifting between those ratios. 1-2 hangs and kinda pulls as it shifts. Feels like a solenoid, but curious if you were having similar issues. Thanks!!

Should i replace the camshaft on the front as well?and do you have video step by step

Please help.... I have a honda accord 7th gen 2.4L automatic i have problem from shifting 1 to 2 , i think it is this solenoid as it only shifts from 1 to 2 if i only let off the throttle but it shifts perfectly when it shifts to 3 4 5... The solenoid is not available as a used part because this car are very few here... So i have a doubt that will the solenoids of 8th gen 2.4 L accord will work as 8th gen accord used spares are available because the 8th gen accord are more here. Can anyone help me by saying whether the 8th gen accord solenoid will work on 7th gen accord 2.4L Note: 8th gen accord automatic has a sports mode with paddle shifters but not the 7th gen accord also the part numbers of 8th gen and 7th accord Solenoids are different but they appear the same (Sorry for my bad english)

I appreciate this video. Informal, to the point and explanatory. Thanks

I have crv 2014, recently i start nothing the car jumps forward when i stop on red light and this is happening once in a week. Do you think this related to solenoid shifting A?

hello my dear friend, I have a honda cr v 2002, d flashes when switching from 3 to 4 gear, but there are no errors, I checked the solenoid the sound is good, what could it be? thanks

What I needed to know

😅the one thing I needed to see which was rewiring it hec skipped

Will i have to drain the transmission fluid before changing this or is it above the reservoir level? is it high enough up that i can remove it without making a mess if i don't drain the fluid?

What about the reverse

I was actually looking for the way to do it.This video really didn't tell me much but thank you

What a useless video. Doesn't rebuild himself or say who did and how much.

Where this located in 2003 Honda Accord 2.4 please. The one for 1st thru 4th gear. ( bigger one )

I'm working on the same thing right now. There's one more very important solenoid. It's on the front drivers side of the transmission on my 05 odyssey. I believe it's the tc lockout solenoid. When you remove it, there's a bowl shaped screen that will likely be full of metal shavings and particulates, clean it and if you ca find one, replace the gasket. It's a rubber direct fit gasket that drops into groves all around the solenoid mating surface. Also, clean all of the old debris and grime off of the Trans mating surface or you chance transmission fluid seepage from one orifice to another, effectively defeati the purpose of cleaning it out at all.

Thanks for this information. I just purchased a Honda CRV that needs a couple things before it’s drivable. I took it for its first drive today, first gear was fine, but when it shifted to second, it fell into what felt like neutral, and eventually made its way into second gear After a complete stop. I drained the transmission fluid, definitely looked like it needed changing, but not horrible. I’ll start by pulling the solenoids and giving them a once over.

If this account is still active whatd it feel like when they were first going out? My 04 CRV will only downshift from 2nd to 1st if i start accelerating again which cause for a jolt and really bothers me. Never slips and feels strong but I (with my limited experience) swear it’s not right.

This is very helpful and I appreciate you sharing your knowledge 😊

Please but can day work on it?

My echo cs440 will wok and power (replace OEM carb.) but will not turn off until I pull choke out. Any suggestions. Thanks and God Bless

Definitely worth a like! If the solenoids test good, can they still not be working 100% properly?

B.S correct that you need to remove aluminum

What about on 2015 Honda pilots? I've got vibration only on acceleration and a little hard shift on certain gears, but the gears changed after the dealer just did an update on it. They think it needs a new transmission, but I'm thinking not. It has been serviced regularly every 30k miles and had this issue when I bought it last year with only 90k miles on it

My first to second is going bad 2005 Element especially when cold bangs into second.

Not really helpful at all. Thanks though.

My Element is a manual, but my 04 Accord 2.4 auto trans is starting to delay, shifting from 1st to 2nd. I suspect your diagnosis is the problem I am having. Would this fix apply to the Accord automatic transmission too? BTW, my brother-in-law just bought an 05 Element auto w/313K miles. It’s runs quiet and shifts perfectly.

Hey I have a 2001 honda accord cf3 I have a shifting problem we're when it warms up it slipps first gear and goes into second irratically and when I scan it scan tool show me a p1750 code clutch pressure failure what u think could be the problem a change 2 transmission and its the same issue with the second one

My 2009 honda crv transmission shakes going from third to fourth? Will this fix?

The rpms from the 4 gear doesn't respond . I press the the gas but that 4 speed only goes down passing 40 mph. What can be wrong? Thanks

I have a 1983 Honda Accord (barn find) with 45,000 original miles. I changed the valve cover gasket recently, and when I finished, I found that I had (1) high rpm idle and (2) high rpm shifting. The car is a 4-speed automatic. I repaired a cracked vacuum line to the carburetor that fixed the high idle, but I still have a high rpm shifting. The fluid level is fine, and the fluid is red. Do you know if this 1.8-liter engine has a vacuum line from the intake manifold to the transmission? And does it have a modulator valve? Any added info about what could be causing this will be appreciated. Thanks

Awesome info saved me bunch of money to replace my 1999 crv solenoids. Got aome from the junk yard for $2 each for both

Honda Accord changing shifter relay

I put a couple of socks over the filter and taped around the neck. I can floor the throttle now...:) no bog.

"For these bolts here I like to properly torque down these bolts, just a habit of mine.... And when you do your car make sure you look up the proper torque specifications. You can either go online or look in a vehicle manual and it will tell you exactly the uh proper torque of your vehicle, and it's a good thing to make sure that all the bolts are properly even, so the pressure the spaced out amongst the metal evenly." Then proceeds to not tell the torque spec... Anyone know what the torque specs are?!

I pretty much have to get a new bike lane so the the cars can pass then ten sec into take off I'm rolling normal anyone tell me what's wrong

I have a zummer 50cc TaoTao and I put a hypro carb on it and it came with that cone air filter I ripped the stock one off bad boy I was because I have to buy another one now am I able to tell if I need a new clutch it runs good but when I stopped at the light and go to take off well it takes about 10 seconds before it catches and takes off

I think he's just trying to make a dollar out of me

I put the tape on the profornance cone air filter 😮I think that may be it the moped store said I needed a clutch how would I know if I need a new clutch

I'm going to do that now

I have a question..what causes the engine to shut off when drive is selected in a honda r20 a engine 4W. D..

Why didn't he disassemble the chamber it has a spring in correct orientation

Hello sir, what if, after i start my engine then put my gear to D but there is a shift malfunction and the light of the D gear is blinking. The car did not move at all. Is it solenoid problem?

Why don’t you add in the description? Where are you sent it?

Help please need some information, all gears are working properly on 1998 crv except gear 1. My vehicle does not switch to gear 1. Is that a transmisson rebuild issue or can it be a solenoid

I replaced all solenoids and still doing the same not shifting gears

Gears shift and reverse gear not working at all. The car can't move reverse

My 2003 is not get d or r it try to move but nothing

So where's the previous empty cartridge?