วีดีโอ

I would have just drilled the holes a little bigger and used some hex extension adapters.

thanks

Nice build!, but this motor is cogging, it means it doesn’t have enough torque for such weight. And it’s not really smooth when it’s struggling.

Does the prgram card come included ? Or does any from an other fusion work ?

Excellent review of this system. Thanks for your efforts!!

Nice Ripper build! FYI - the furitek motors are waterproof but the PLASTIC cased Lizard is not. It is easy to waterproof the Furitek ESCs by removing the case/shrink wrap and submerge it in a can of Plastidip. Plastidip can be easily removed leaving no residue and can be found at most US hardware stores. Submerging electronics like receivers, ESCs, and servos will completely waterproof them. Although sometimes with servos, some water can still leak in through the exposed servo horn gear. I have every single one of my RC trucks/cars waterproofed with this method. 👍👍

Needs some real good tires, those hyrax knockoffs aren't good enough for this nice build. Maybe try the new aztecs or maybe the trepadors??

The post at the rear is pretty smart idea. Kudos!

Tengo straight axles en mi C10 pero tengo estos de repuesto quiza solo ponga los Portales Frontales para mas claridad en el frente y con overdrive

De CDMX saludos , tengo un deadbolt y estoy armando uno justo como el que muestras

did no one realize that the rock sliders were installed upside down? Oh and I'm pretty sure the rear links backwards. Or was that a choice made in the video which I missed? Or was this already pointed out and I just gotta watch more vids? lol

the C clip on the axle is what holds the pinion depth setting. without it you may get some extra gear wear and drag.

I would recommend flipping the skids to the up position for more clearance. also battery in the front rather than the back is a must for correct CG. I have broken a ball cup both of my first trips out. I have since replaced the ball cups and balls with Axial Capra parts. for the front I used a 40mm X M4 turnbuckle with angled ball cups for the uppers, and 55mm M4 turnbuckle for the lowers, on the rear I used the stock linkage with straight capra ball cups. much more flex in the front suspension now. I am using TRX4 shocks all around with white springs in the front and green in the rear. the body mounts are so loose I couldnt use them. I ended up 3d printing TRX4 body post adapters I found online and they are excellent.

I would have learned something, but I can't understand a single thing you're saying.

Unless your planning to chop the front of the frame off those links are wrong . That is the worst approach angle I've ever seen..

How long does the battery last and are the parts easy to get and thanks the video is very good

An I really like the axles you can make them portals that's what I didn't do I f9 Currie offset portal axles Capra axles and now I have to get me a straight set now they are built great my friend

Use silicone around the cables after u run them in the box

I'm buying one

does the treal axles come with barings and diff gears?

get better shocka.

go treal!!!!

They also make a 2 speed aka overdrive or underdrive version of this correct?

how you think this compares to the eazyrc truck you reviewed??

I have the Trx4 hightrail and both Trx4m the little trucks are equally amazing the Bronco area 51 knockout looking truck the Bronco crawls better less body weight especially back Land rover more tippy but good side hilling up hill Bronco excellent 👌 Traxxas has some great products now waiting 1 6 scale crawler from Traxxas 🎉

Those beadlock wheels look fantastic on that early bronco

hola buenas! el sonido agudo cuando se acelera muy despacio se puede sacar?? seria del motor o de que seria ese sonido??? Gracias! Saludos!

What a great paint job im still a one colour person after 4 years 😂 ❤

Sliders was upside down down

Oh yeah that paint job turned out great my friend good job on your build I have really enjoyed watching you build it thank you for sharing it with all of us

How much wider are they compared to the normal SCX24 axle?

Jellow and Chaulks good build just do not like the red and yellow

Super le chassis , on peut installer des liens et essieux capra 1.9 dessus ?

What length drive shafts did you use

I like the paint job.

Thank you so much for this series. I'm about to go through this same build process after I purchased a used and very very abused SCX10.2 that I'm now rebuilding. Thank you thank you thank you

Very good job on the step by step breakdown. Will be doing this to my high trail when I wake up. Thank you for the content!

Bought one a month ago its a awesome and tough basher worth the price!!

Looks like a knockoff of the vanquish Currie axles

Just started my build using this chasis! Your videos will help me so much! Gracias!

It's just another no name Hyper Go.

Great build with some great parts. Came out really good. Just wanted to point out you have the grill installed upside down the reason why there's that grap between the hood an grill. Also have the roof on backwards, the curved end goes up front. Just giving you a heads up. Like yr channel and great builds!!

I did almost the same thing. I used the furitek cedar motor and a different servo. I put the battery inside the cab behind the transmission, it's a bit fiddly getting it in there but it looks nice not seeing the battery. Oh I also added underdrive in the back and overdrive in the front, it's my favorite small crawler now.

Man that thing is sweet. I got a scx10 chassis coming as well as a 2sp transmission and 1080 esc. I like the receiver box thats a great idea

Great video bro. So nice it has instructions…. Saw u on face book can I get a sub bro I been bashing and just got into the micro crawlers and now I’m hooked.

I found Bezgar has a 3s lipo in the exact same battery case and fits in the same spot.

Can this be used with stock skid and transmission? Ready to pull the trigger and get it. Thanks in advance

,👍👍👍👍👍👍

I love the Truck runs good

love the content brother.