วีดีโอ

how do you bleed the water out at start?

Why didn’t you clean out the bottom of the filter?

Hello, great video. Where do I get those parts? Also, I replaced the heater pad and board which fixed it. Now it stopped working again. Before, I couldn’t turn it off. Now I can’t turn it on. Should I get new pads and board again?

I don't like the pump running with not enough water in the basket housing. After i stop the pump, i hurry up and close the valves to the skimmers, main drain, and the filter and that housing stays filled to the top with water. After I reinstall the cap, I'll open all the valves again before startup

Thanks a lot we just had the same issue and my husband could fix it with your video in no time. ❤

And this was the easy way?

I replaced the old with a new one but still nothing.

Or you can use dawn soap and fill it with water.

Thanks! Going to buy the part right now with the knowledge that I can make the swap. Appreciate.

But if you have a sand filter that can only handle 70 GPM why would you run your motor to push 90-105 GPM through your system. On Quicklean the motor runs 3450 RPM and that pushes around 100 GPM through your system That's a good way to tear it up

Get yourself a high pressure wand hose attachment to get inside the crevices

Thanks. Worked like a charm. Saved $ and I feel great.

Do I use quick clean to backwash the pool as well?

Thank you! You are a great teacher.

communication lost issue in my hands....

We are so tire of doing the filter cleaning 2-3 times a year. Wondered if it's worth it to replace the DE filter to a sand filter for less maintenance?

My lid is stuck! How can I pry it off?

So youre only supposed to use a chlorinator. The floaters are only for if you have no way to chlorinate your pool otherwise.

What model # pump do you have? I need a screen for a 011018.

I have this new solar skimmer, do I still need to run pool at full strength, or can I reduce the speed and time running? Many thanks

Thanks for your video. I have a question, my screen is working and showing all info correctly, but no matter what button I press it won’t do anything. Any suggestion on what could be wrong?

Thank you so much for making this video. Now I can take the guess work out of making this repair. Half the battle for me is not knowing what’s underneath the cover that may be spring loaded and you never see where the part shot out to or what it looked like. Please, Keep making more content like this.

The 90s into and out of the pump is definitely a no. There should always be more pipe at the inlet and outlets. 90s add about another 10ft of pipe to a system and air gets trapped at the top of the bend in the 90

It does not make sense you have to run it much longer for the water to cycle atleast 3 times a day. I believe that it basically costs you the same as a normal pump. I thi k the only positive is less wear and tear on the pipes and filters

I took my clients old brass pump and I’m going to refurb it. Things killer and still running strong.

I have always done this, but I do it into a plastic bin, let it settle then pour clear water back via filter. Then I pour the remainder through an old piece of cloth in the corner of garden, when dry put it in rubbish. This method only uses a fraction of the water to clean and is 10 times cleaner..

Would you recommend this cartridge filter? Trying to save some money over the Pentair 420. Thank you!

Pool is green. There doesn't seem to be much pressure coming out of the outlet port in the pool, (not like normal) nor much pressure on the inlet going back to the pump/filter. Could this be a filter problem? Clogged? The pump is less than a month old

Of your gonna do it , do it right , always carry spare parts. Replace the manifold , take grids fully apart, been doing this for 23 years and that my friend is the lazy way.

youtube.com/@gogettamafia8939?si=Ban00EhUy6e4T1Au

Try this link, could save you having to purchase a new display: th-cam.com/video/K95jkQH-nyA/w-d-xo.html

or run it for less hours?

I have same issue. Buddy, you made this replacement easy as a beer on Friday night. Also, need to find a inverter heat pump for the inground spa attached to the pool. I have a Weather King heat pump piece of junk that is way to big and after 4 years is falling apart.. I have pentair intellichlor on a intellicenter with solar water panels so I need to be able to monitor temperature to pool going through solar water panels during the day when sun is full blast in Miami. 20000 gal pool with 2000 gal spa and water fall over to pool. Panels heat pool but need smaller inverter heat pump for spa. Your ideas?? Keep doing your vids. on TH-cam. They are great. Rick

Where can I purchase a keypad replacement for my pentair pump?

Why did you do a sweep off the discharge? Lol 😂

How do I get a new one like that mine did the same things.

Thank you sir.

Hi Tim, I subscribe your channel. I would like to ask: the screen light (yellow background light) of the control display on my pump is always on. Is this normal? How can I turn the light off? Thank you very much :)

lmao..trash that variable speed POS

Hey great video.. how do I use max speed(quick clean) for vacuum suction but not having high expulsion from jets so can see the bottom of pool ? Andrew

I have the same issue currently. thanks for this video! (what I notice the pump only runs for a few minutes then timeouts) Could this be due to the led screen and keypad being faulty?

How do you replace fingers or long tubes in my DE filter

Thank you, great fix

Do i have to use the connectors or just heat shrink cable protection

garden hose go around twice they gone.

How can program the sweep using the higher speed using the pentair app? Nevermind - apparently the default speed on the app for the sweep is really low. Question is why? But I upped the speed to 3100 and it moves along nicely

Hi Tim, hope you can help me out here. I had this pump for just over one year. We had a bad lightning storm one night with almost a direct strike to the house. All the electronics in the house survived, but when I checked on the pump in the morning, the display was blank (back lit only), the power indicator (the little lightning symbol (of all things 🙄) was lit, but none of the keypad buttons worked, and the pump would not run. BTW, the pump was not running during the storm. I can buy a new keypad, but I'm worried the deeper control electronics in the pump may be fried. What are your thoughts?

Is that what it looks primed ?

Nahh I prefer my 1988 single speed duraglass pool pump

Nst tablets have high ph...package says to put it in skimmer