วีดีโอ

I called my local Toyota dealer parts department and they had them in stock. For the limited.

Thanks Brother I appreciate it!👊🏼

Alonso, normally you can click on SETTINGS, GENERAL then the ABOUT SYNC tab. You should find your information there. Let me know if this helped. 👊🏼

I’ll take that into advisement. Thank you. 👍🏼

@LivinWith3M just a FYI that oil isn't something you can just buy off the shelf anywhere, Napa might have 2-3 gallons on hand. It's gotten easier to find, used to have to order it online. Absolutely pain in the ass to find in stock, cheaper than Amsoil almost identical protection and quality. Both are made the same way. Don't be caught thinking Platinum or Euro blend 5w30 is the same, it's not. It will have a black label vs silver of the regular Platinum or Euro blend. First start up, you'll instantly notice the VVTI retains oil pressure after shut down so next start up it's quiet. Prevents chain stretch on the 5.4 Triton motors too, normally a ticking time bomb..

Man that’s valuable information right there. Thank you. 👊🏼

Awesome. Thanks for that tip Jason, I sure appreciate that. Talk to you soon on how you like the prolube. 🤙🏼

You are very welcome. 👌🏼

Awesome! 👊🏼

@LivinWith3M For twice the power and features, check out the GOOLOO GT 4000 battery pack. I just got one for my other car.

Actually, it is possible, but only by changing out your mirror assemblies. Go to a salvage yard or look online for someone selling side mirrors that have factory puddle, lights, and switch out with those. It’s a quite simple swap.

My advice would be if you wanted this bad enough I would find a set of used mirrors with power and puddle lights to replace with. Because if you don’t have puddle lights to begin with, I don’t see how these would benefit.

Thank you. I contacted Mercedes and they said absolutely do not mix blue and pink antifreeze. It could potentially damage your engine.

You’re welcome bro. Please report back and let me know if you tell a difference with the prolube. Also , good deal on the dealer replacing your trans. I hope that’s under warranty?

​@LivinWith3M definitely will report back. Thankfully the warranty picked up the tab

Right here on Amazon. amzn.to/41twaKR

Exactly. Yes it does. My wife and I kept hearing it and thinking it was coming from inside but it’s really the cowl outside. 🤙🏼

Lay up under the front bumper and look up. You will notice there are four locking tabs that you have to push with your hands. Once you push all four of them, come back out to the front and give the tag holder a yank and it will pop right out. 🤙🏼

Yes the Mercedes dealership is going to ransack your wallet for sure. The 2018 c300 part is different than my 2014 c250. Here is the link for your tube. amzn.to/3ZnEZTB

Does anyone know if it's the same thing for 2018?

The only way you can lose power by adding the spring to the wastegate is if the spring is too tight and won’t allow the wastegate to open. If you install the proper tension spring you will have no ill side effects.

My title just tells people how to change from one bulb that’s existing in there to a new bulb. If you’ve got other issues like electrical that are not allowing the bulbs to work properly then I’m sorry I don’t have any answers for that.

I’m so sorry it didn’t work on your escape, if I can get information on how to remove it, I will yell back at you.

Awe man, thank you for the kind words. That’s awesome ! So glad it fixed your rattle. Take care bro. 👊🏼

Good deal. Let me know if it works. 👊🏼

I didn’t have one with mine. Maybe someone can chime in and let us know if they’re supposed to be one there

Great advice. Sort of like a pickle fork. 🤙🏼

@LivinWith3M thank you so much for your video. I was able to replace my cowl with the help of your video!

You are most welcome. Glad I could help. 👊🏼

I agree. Definitely can’t do the 10k mile that some oils suggest. 3-5k would be my advice also.

You are welcome. Glad I could help

Glad you done this yourself and saved. 🤙🏼

I swear. Highway robbery for plastic

Thank you my brother. Same goes for me, every time I tune into MACK I learn everything from truck stuff to cool editing tips. 👊🏼

Hahaha. Hey bro you are most welcome. 🤙🏼Nah don’t feel that way. I thought the same as you did for a while also. 👊🏼

If so please report back. I hope it’s an easy fix for you. 👍🏼

You are most welcome. 👊🏼

Thank you. Awesome, my Son went to college at Montreat a few years ago. Small world. Hope y’all ok up that way? I know it’s been really bad recovering.

I’m really not sure how to answer that. I just unbolted the lower unit and gravity assisted it to slide down.

Thank you for watching. 👍🏼

Thank you Sir. If you ever need me to help with whatever car project diy you got going on just yell. 🤙🏼

Mine does yes. They really help a lot.

@@LivinWith3M my 2020 has dark windows so in the morning I have to roll down my windows to back out of my driveway and water dumps in from the roof I tried the in track type and the windows would roll back down so sent them back

Yeah the in track type are smaller and will let more moisture inside plus they interfere with the roll up sensor. I honestly think you will be happy with the stick on type. 👌🏼

I’m not sure what you are asking. If installing a lift kit on the truck, then yes you will have to lift the front of the vehicle. But the front of the vehicle is entirely a different set up than the rear

To my knowledge that’s all I can use in mine.

@ thank you!

@Thi262 you are welcome. 👍🏼

You are most welcome. Glad I could help.👍🏼

I’ve unplugged my electrical for now but that is my next mod for sure. I’m all about doing replacement parts videos, But these IWEs fail so often it’s not worth the hassle I feel.

@ yup! I replaced stuff and it persisted. So I just capped the lines. Its been thousands of miles and I haven’t noticed any difference and have not had any more problems.

That’s a possibility, but I’ve had mine on for a year now with no tension loss. Worth it to me to change out every so often if they stretched, but so far so good 🤙🏼

I totally agree.

Very good info. Thanks Steve. 👊🏼

How did you resolve the "lock body has a configuration that does not line up with a 20 year old ..." ? Thanks.

Awesome! Glad I could help 👊🏼😉

Thanks bro. 👊🏼

I had a local shop match it. Just be sure it’s a reputable shop that will prep the scoop first and not just paint it. Prep by making any waviness in the surface flat and smooth by sanding correctly. 🤙🏼

@LivinWith3M Cool thanks 🫡

@desperadopharaoh2361 you are most welcome. 👊🏼

🤣you are quite welcome.

I’ve heard a lot of the cam phasers were upgraded in 20 so I think you luckily missed the issue time frame.

You are most welcome. 👍🏼 and Thank you.