- 26
- 27 561
Dui ni shuo de dui
เข้าร่วมเมื่อ 21 ก.ย. 2012
CoreXDIY : Large Format CoreXY Printer Test Print
This is a video showing my last printer design.
The print surface is about 350 x 800mm , it uses a Duet2 wifi + Duex5 board , has independant triple Z axis with auto leveling, featuring ballscrews with a custom decoupling system to limit Z wobbling.
The printer is theoretically capable of running at more than 1000mm/s at 10-15K accelerations, but right now I'm limited by the extrusion system (Plastic doesnt melt fast enough to cleanly reach those speeds, even with the volcano head). Printer also features input shaping through the help of an accelerometer sensor.
Print quality is very decent already, but hopefully will be improved in the future with an enclosure around the printer.
The print surface is about 350 x 800mm , it uses a Duet2 wifi + Duex5 board , has independant triple Z axis with auto leveling, featuring ballscrews with a custom decoupling system to limit Z wobbling.
The printer is theoretically capable of running at more than 1000mm/s at 10-15K accelerations, but right now I'm limited by the extrusion system (Plastic doesnt melt fast enough to cleanly reach those speeds, even with the volcano head). Printer also features input shaping through the help of an accelerometer sensor.
Print quality is very decent already, but hopefully will be improved in the future with an enclosure around the printer.
มุมมอง: 3 055
วีดีโอ
Maserati 4200 Coupe GT Cambiocorsa Acceleration POV
มุมมอง 2.9K8 หลายเดือนก่อน
Proper full throttle acceleration with the cambiocorsa robotized transmission. This transmission is a blast, very underrated.
The BOx: Large 3D Printer Fitted With a 0.4mm Nozzle
มุมมอง 3252 ปีที่แล้ว
This is a little tour of my DIY 3D printer while it's doing its thing. It is fitted with a 0.4mm nozzle and is capable of printing with a comparable quality you'd expect from a prusa, creality and whatnot. The build thread is available here for those who want to know more about it: forum.v1engineering.com/t/mpcnc-made-in-china-new-build/19393/507 Cheers!
BOx Giant Printer New Print Head First test
มุมมอง 2562 ปีที่แล้ว
This is the first test of my newly designed swappable print head. This print speed is very slow since it is only a test, the printer can go way faster than that. Check here for the build thread in case you're interested: forum.v1engineering.com/t/mpcnc-made-in-china-new-build
Big CoreXY Printer First Moves
มุมมอง 1.1K2 ปีที่แล้ว
Building a new DIY coreXY printer, all 3030 aluminum extrusions and 3D printed parts. Powered by a Duet2Wifi DueX5 extension board, 3 independant Z axis for active leveling. This test was done at 800mm/s top speed and 20 000mm.s2 accelerations.
Electric Motorbike Controller Problem
มุมมอง 2733 ปีที่แล้ว
Trying to troubleshoot my Kelly KLS72701 Controller, Heavy vibrations at some rpm.
S42B Stuttering Problem
มุมมอง 2303 ปีที่แล้ว
Very high stuttering from the S42B drivers. Still investigating on the cause, but very likely too quick of a step pulse.
S42B Closed loop Stepper Single Motor Test
มุมมอง 1.3K3 ปีที่แล้ว
Test of the S42B Closed loop steppers from Bigtreetech, with only one stepper motor per axis connected.
S42B Closed Loop Steppers Push Test
มุมมอง 3.3K3 ปีที่แล้ว
Testing the torque of one single Bigtreetech stepper motor on my X axis.
S42B Closed Loop Steppers Test on my Large Format Printer
มุมมอง 1.8K3 ปีที่แล้ว
Testing the Bigtreetech S42B v2.0 closed loop stepper motors on my BOx DIY large format printer. Speed is around 500mm/s and acceleration is set at 3000m.s-2 Check my build thread here: forum.v1engineering.com/t/mpcnc-made-in-china-new-build/19393
Electric Roadster: Testing the Motor for the First Time!
มุมมอง 1383 ปีที่แล้ว
This is the first move of the new Electric Motorbike I'm building. To see the build thread, check here: endless-sphere.com/forums/viewtopic.php?f=12&t=109246
BOx DIY Large Format Printer: Test Print
มุมมอง 1753 ปีที่แล้ว
Working on the speeds and acceleration of the printer.
BOx DIY Large Format 3D Printer: Bed Calibration
มุมมอง 1613 ปีที่แล้ว
Testing the homing, bed tilt adjustment and bed autoleveling features of my DIY printer
BOx Large Format DIY 3D Printer High Speed Test
มุมมอง 4703 ปีที่แล้ว
First test of top speed on all axis, in order to see if everything is mechanically fine. Not extruding plastic yet because it's missing a few parts on the extruder, but that'll be the next step!
BOx DIY Giant 3D Printer: X Axis Top Speed and Acceleration Test
มุมมอง 1533 ปีที่แล้ว
A small test of the X axis acceleration and speed in order to see the limits before the printer starts skipping steps. Here the top speed was 300mm/s and 3000mm/s2 of acceleration, the printer still move happily without any step loss! Details of the build here if anyone's interested: forum.v1engineering.com/t/mpcnc-made-in-china-new-build/19393
BOx Large Format DIY 3DPrinter First Print Test
มุมมอง 3093 ปีที่แล้ว
BOx Large Format DIY 3DPrinter First Print Test
Large DIY 3D Printer first X and Z homing
มุมมอง 3393 ปีที่แล้ว
Large DIY 3D Printer first X and Z homing
I plan on repurposing my EMT8 (Anet A8) into a bigger printer via MPCNC Burly.
Are you selling these? ❤
You can build a house with this one.
cool! does this project have a github page? =_)
what hotend? have you looked into the goliath?
With his machine seemingly being only 2WD, I don't know if he'd currently be able to go fast enough to actually take advantage of Goliath volumetric flow yet. 🤔
@@x_jaydn Bigger nozzles
@@UnwrittenGamingftn Fair enough. I guess line width and layer height too~
@@x_jaydn Especially at this size, remember you don't print 0.2 if you are printing 800x350
@@UnwrittenGamingftn agreed, even on smaller machines, I only ever use 0.6mm nozzles at the smallest. I rely on Arachne for finer detail 👍🏻
Nice job, could you share your STL's?
Yeah I'll need to put it on thingiverse, just need to make sure it's reliable first :)
is this all rail 12?
Yes, the reference is MGN12H.
Wow what are the dimensions on that?
The print area is around 350 x 700mm
👍
Why this doesn't have comments... Your work if very good...
Nice
Hello I really like that you got the mpcnc to 3d print can you tell me what firmware your using I have one with a skr pro board that I would like to do 3d printing
Interesting design.
dude if you ever make that thing work you should put a instruction on TH-cam that thing is like pandoras box, no one knows how the switches on it work, I spent a month try to understand and configure it. nothing made sense. the document said something the unit did something else.
nice work!!! Do you have stl file to share? Thank you!
My favorite TH-cam playlist going on the background... ;P
Did you reduced puls width? For klipper and marlin it may help. I heard 150000 pulses in marlin. And in klipper i double or trippled the nano seconds
Hi mate, thanks for the suggestion! Unfortunately yeah I tried that before even shooting this video. Never got these things to work fine, I'm back with regulars steppers now. May give them another chance later if there's a new firmware release someday.
@@duinishuodedui4999 unfortunely, a simple firmware update is not same as 42c model. this 42c get rid of this old alegro drivers. I am struggeling with layer shifts, i have had never before. Lol. Maybe i have to increase motor mA. Some people reported that they have doubled the normal mAh. For example 800mA to 1600mA. Maybe there is a bug or we do not understand why in hell we have to set double the mA. I think revision 42d in future, will be the real release. Would be nice to have the serial communication to mainboard, like spi/uart driver do. The possibility is inbuild. The board supports uart communication. But this is not connected and useless for klipper/marlin. Hopefully next hardware revision can replace a 2209. This salmon skin thing, what users reported, may fixed. A liitle software magic can fix this salmon skin. I think you better sell the 42b, or use it for other motorized projects.
Wow! I just skimmed through part of your thread on the forums... so cool! 1.2mm nozzle, holy smokes! I bet this thing is a blast.
Do you have the models for your hotend to share publicly?
Yes. Look at thingiverse. Search: DOMin8or. Its my creator account.
You can use it, without this connector, if you want.
What’s the bed/print size ? Very cool!
Thanks mate, the print size should be around 400 x 800 mm or a little bit less, it will depend how compact I can make the print head
Man.. your gantry and idlers system looks very practical. Is it your own design? Looking forward for the next uploads.
Thanks ! Yes I started this design from a blank page, tried to make it as easy as possible
That's bonkers
I had a lot of issues with these too. I have 3 S42B 2.0's that I used in a delta that produced horrible motion. As it turns out, all versions have GARBAGE firmware, BTT spent very little time developing these units. Thankfully they are open source, and there is a Github project to fix the issues and make them useable. I'd recommend following this as they will probably have a release soon. github.com/CAP1Sup/Intellistep
Really cool what software and control board you used for this mpcnc printer
Just regular Arduino Mega/Ramps for control board, running Marlin Firmware, DRV8825 motor drivers.
Ohhh, I see what you did there with those linear bearings, that's a great mod U mad scientist ;)
Look at the MPCNC they made the designs
cool
salut il me semble que tu es francais beau scooter meme si la video ne rends pas bien tu es sur endless je crois ? je tai mis un mp
C'est énorme ;)
tu utilise quel logiciel pour la piloté
Et le résultat ?? Dommage de ne pas l'avoir inclus :) Sympa en tout cas !