- 52
- 197 689
Keith Wendl
เข้าร่วมเมื่อ 10 มี.ค. 2013
Red Rock Canyon, Rocky gap Rd
This is a 4x4 trail from red rock canyon loop to top of ridge via Rocky gap rd. This is just past Bridge mountain trail. A stock 4x4 with low range will make it to the trail head, this is 1/2 mile past trail head and it got really narly. We turned around due to the boulders getting too tall for my stock 2008 Grand Cherokee.
มุมมอง: 256
วีดีโอ
Pontiac G8 steering wheel shake
มุมมอง 4552 ปีที่แล้ว
Adding hub centric rings to solve steering wheel shake. This cured my issue!
Lost my boats key, now what?
มุมมอง 8K2 ปีที่แล้ว
I lost my ignition key, here is a quick fix. Obviously now anyone can start your boat with a screwdriver. I would highly recommend getting a new ignition. Boat is 1996 Four Winns Horizon 220 DLX
Four winns 220 Horizon
มุมมอง 1K2 ปีที่แล้ว
June late afternoon Willow Beach Arizona. First test of my new to me 1996 Four Winns 220 Horizon DLX. Boat needs new U-Joint Bellows, trim gauge, throttle cable is sticky. Propeller seems under sized. It’s a 14x19, book shows 14.5x19 is stock. I want to upgrade to a 4 blade.
California adventure, California Screaming. Kyle's first Ride!
มุมมอง 2638 ปีที่แล้ว
California adventure, California Screaming. Kyle's first Ride!
Martinsville NASCAR Joey Logono Matt kenseth
มุมมอง 7819 ปีที่แล้ว
Martinsville NASCAR Joey Logono Matt kenseth
Danica Patrick Martinsville brake check 2015 NASCAR
มุมมอง 4609 ปีที่แล้ว
Danica Patrick Martinsville brake check 2015 NASCAR
6.2?
Do you need to have a special key after you pop it? Or any key or flathead work?
@@KollynJ I used the glove box key. I think a flat head screwdriver would work also.
Does this exhaust have the resonators? I’m trying to find an exhaust that is moderately loud but can open up to be really loud. A repair order messed me up
@@pontiacmaniac7772 catless straight pipes to the mufflers
Other resources said to put a flathead screwdriver in and tap with a hammer. I didnt tap hard at all and my plastic ignition flew out of the back of my dash. It went into about 20 pieces with tiny springs and balls lying around. Not a good idea. I wish i would have 1st tried your method
whats the exhaust setup?
Kooks LT, X-force mufflers
Now that’s helpful, thank you 🙏
Sounds just like my 4.6 Mustang tbh
I had the same issues with mine. 1) super pro front control arms. 2) ROAD FORCE balance your front wheels. Night and day difference.
Nice howl. That looks like Vegas btw
Yes, Las Vegas 🤘🏼
@@keithwendl8328 nice! I knew that looked familiar
What was your idle set at with this cam during closed loop?
They're in shock this guy is pitting.
It wasn't Alpine's fault the race hasn't ended so why are they on the pit lane
This was so fun when I did it
That looks so fun
Hey man, looks like an awesome fix. I got the same type of prob. Happens only when I’m braking. Did it end up working out for yuh?
Mine was shaking at speed cruising over 50 mph. Might not be the only issue. But you need these rings if your wheels don’t sit on the rotor hub. It definitely helped my shake. It is still there under braking. Probably need to pull my rotors and have them turned.
@@keithwendl8328 thanks man I appreciate it!
get ready for 70+hrs a week
When you're on the throttle the injectors open up more, so you would lose pressure. However there is a pressure regulator, so either something is wrong with that, you have some kind of blockage in the fuel system, or you probably have really old dirty filters
It’s dropping 10-15 psi, I ordered two new fuel pumps. This car has a CTS-V bucket with twin pumps. Hopefully this solves the issue.
@@keithwendl8328 what was it
@@rowiththefloww needed to change to a map based tune. So now the pumps rump up based of reading of the 3 bar map.
What a race! Toto was fired up!
Zoom zoom 😎👍
Top speed?
anthonyk 48-50 on gps
SWEET!!! Cant wait to get back to Work.
Do you know where you can get specs for this motor? Looking to do an oil change and other genre also maintenance on mine. Thanks!
colt medinger I always ran 20-50 Valvoline VR-1 engine oil. Other than that you should look on amazon for a OMC service book.
Is there any drone when the valves are open? Im debating on getting this or corsa
Jonny Ortiz not very much! I love these! So quite when closed!
did this kit come with everything to control the electric cut outs?
RED Yes, control box plugs into cig lighter. Comes with two key chain remotes.
C’mon Lightning!
Is this the exhaust where you can make it loud and quiet?
Jay W Yes, it sounds like stock GT mufflers inside the car when valve is closed.
Keith Wendl I have the same exhaust which is pretty cool now I can mod my car without waking the neighbors😎
Jay W Definitely worth the money!
would love to hear the in cabin noise while driving
I just had mine with the same cam and fbo. From the cabin it sounds badass ! Sadly the motor blew .
Sounds good, I have cut outs so its either Prius mode or noise violation lol but this is a good mix.
That G8 Guy I like that either mode there isn’t any drone!
How do you like the ls9 cam?
Scott Haddock Drives like it is stock. Until you get past 4,000rpm and she really starts to rip. I have an LSA supercharger in E-85 now. It breaks the tires loose in 3rd gear now!😳
Keith Wendl that’s awesome! Would love to do that. Going to do a cam on my PPV soon but keep it a modest build. Would you suggest a LS9 cam for NA?
It is a dog down low NA. I put in a3.45 rear diff. Drove it for two years without the blower.
I gotcha. Well thanks for the feed back on it
@@keithwendl8328 still on an lsa blower e85 setup? How's it holding up
Hello..is that a hull thru exhaust or thru the prop?..i have one im biilding right now and not sure if i should do the hull thru
Kevin Vezina Prop exhaust!
@@keithwendl8328 great tone!!not too loud but just right...i have side mount tips but havent installed yet...i have built the 5.7 up to 335 hp ..I think I may wait on the hull thru after hearing yours..thanks
@Joseph Houser who gives a shit what you think....you can peel 75 hp out of a decent 350 easy..it isnt just a cam bozo..included roller rockers,bump in compression, 4 hole plenum spacer, electronic ignition,rejetting, a K and N filter..,porting with z28 springs on L98 heads with a decent lunati .468/.489 lift voodoo cam and I went down a prop size to get into my powerband along with a 4° chain advance so that i could run a bigger cam without water reversion and drop my power band down at least 200 rpm..yeah,this aint my first build there know it all...
@Joseph Houser oh yeah..and it was simple to bump up compression...I used .015 stainless head shims instead of gaskets...and yes thru hull.. .I took pictures of everything if youd like to see
Stealthy
Do you remember the magnaflow part #
Marvin Dawson I had a shop here in Las Vegas install it. No part number. The key was having them upgrade the Y pipe. It is a choke point.
Any chance you have a base ls9 cam tune laying around? I’m just trying to get my car running after the DoD delete
Did the same went with the ls9 cam. Still give it some hp even tho it’s a stock cam
Rams! Uhh 🤣
Dude like gut that LS9 cam out..... anything is better..... i put one in mine, just pulled it out and put a baby cam 210/218 550" Lift 116LSA ...... ran more power and more torque then the LS9, picked up a whole second virtually 0-100km/h.. and has torque basically everywhere.... better then the stock cam, better then the ls9 cam....... worth the money. Can use the same springs.... Put it this way it picked up like over 100-125nm of torque in the low RPM spots.... runs 550nm up higher on my setup....
Now I have a LSA blower in my garage! That’ll wake up that blower cam! Hope to have installed in the next few months!
A big truck and.... 2WD lol. I think an old toyota or an outback can make the job...
People helping each other is a win in my book
Glad all my trucks are 4x4. Dumb people with a check book.
Toyota pulling dodge truck and boat. Yeah Toyota
' cement / concrete ramp is a not good design
Someone tell me how buying a 2wd truck makes sense.......when you want to tow and especially launch a boat,ready...go
Do you have cats still?
Bill Monroe Yes still have cats.
I see a win not a fail . That's a heavy boat . All he needs is 4 200 pound guys jump in the back . He will have traction then.
If you are pulling a boat up a ramp in 2wd, you deserve TH-cam ridicule.
whats The fail?
Not enough truck for pulling the boat.
F Huber maybe a smaller boat would be the better solution. Fail is a bit of a stretch here, pun intended.
how does it run with this cam? did you ha e to change the pushrods and what springs are you using. I'm looking in throwing this cam in my car.
Did you and did it go OK, I was thinking of doing the same. stock g8 gt 6L so far.
@@robertpreston2352 same here, I need to know
what kind of muffler on that thing? i like it and I'm looking for something to put on my v10.
This is why you dont buy a 2 wheel drive long bed truck. Who the hell buys a truck thats 2wd anyway.
The Traveler Not everybody needs 4WD
UrABoxxyBox u always need 4wd
Right lol.. you paying that much for a 2500 with a Cummins, mind as well get 4WD
Or limited slip diff. One Wheel Peel!!!!
how do you like the camera? looking to buy one for mounting on/in my car. What mount did you use?
Dungey munnnn!!!