can we use this control box for heavy loading actuators like 4000-6000 Newtons? Should we use this control box for only progressive automation products?
Hi Siva! If the current rating of your actuator is less than 15 Amps and has a voltage rating of 12 VDC, you can use the PA-30 control box as is, but we don't recommend using actuators that have a larger current rating than this. Kindly keep in mind that the control box is for parallel control, not synchronized control. If you have any further questions, feel free to give us a call at 1-800-676-6123 or send us an email at sales@progressiveautomations.com. Thanks!
I have read in your article that pa-30 control box is designed for your manufactured linear actuator only. But we can use for outside local linear actuators right, of less than15 A?
@@sivaramireddymatta4566 Hi Siva! This would be due to the plug-and-play of our units and control boxes. If you would like to use a third-party actuator, the connectors to the control boxes may not be the same.
Hi Ricky You can receive movement in the opposite direction by reversing the polarity of the motor wires (swapping them) as the actuators use brushed DC motors. If you have any more questions please contact us at 1-800-676-6123 or sales@progressiveautomations.com. Regards
Hi there! Could you send us an email or give us a call to provide details on your application? You can reach us at sales@progressiveautomations.com or 1-800-676-6123
Hi Doa! Could you send us an email or give us a call to provide details on your application? You can reach us at sales@progressiveautomations.com or 1-800-676-6123
Hi Thanh! Could you send us an email or give us a call to provide details on your application? You can reach us at sales@progressiveautomations.com or 1-800-676-6123
gonna def call you guys... good work
Thank you!
can we use this control box for heavy loading actuators like 4000-6000 Newtons?
Should we use this control box for only progressive automation products?
Hi Siva! If the current rating of your actuator is less than 15 Amps and has a voltage rating of 12 VDC, you can use the PA-30 control box as is, but we don't recommend using actuators that have a larger current rating than this. Kindly keep in mind that the control box is for parallel control, not synchronized control.
If you have any further questions, feel free to give us a call at 1-800-676-6123 or send us an email at sales@progressiveautomations.com. Thanks!
I have read in your article that pa-30 control box is designed for your manufactured linear actuator only. But we can use for outside local linear actuators right, of less than15 A?
@@sivaramireddymatta4566 Hi Siva! This would be due to the plug-and-play of our units and control boxes. If you would like to use a third-party actuator, the connectors to the control boxes may not be the same.
would be rise the same if they have different weight?
The units speed would be affected by the weight it is pushing, thus the more weight it has to move, the slower it will go.
how can I control the pistons as in the video but in the opposite direction? i mean, when one enters the other goes out, thank you
Hi Ricky
You can receive movement in the opposite direction by reversing the polarity of the motor wires (swapping them) as the actuators use brushed DC motors. If you have any more questions please contact us at 1-800-676-6123 or sales@progressiveautomations.com.
Regards
WOULD THE BOX WORK WITH AN ANDROID PHONE?
not sure about that one in the video but their pa-35 model will.
Hi there! Could you send us an email or give us a call to provide details on your application? You can reach us at sales@progressiveautomations.com
or 1-800-676-6123
can i make it with 0.11 mm wire
Hi Doa! Could you send us an email or give us a call to provide details on your application? You can reach us at sales@progressiveautomations.com
or 1-800-676-6123
Shows me how to play in 12 volt
Hi Thanh! Could you send us an email or give us a call to provide details on your application? You can reach us at sales@progressiveautomations.com or 1-800-676-6123