It pains me to hear you say that. I bought this RX because I only wanted the swingarm. As others have said, who would want an RX with a steel swingarm? But what should I do? I'm going to have a hard time.
Nice, 123 aswel with the adjustable shock and forks. Bike looks good for its age. There any chance you can see if bolt pattern/size is same as SX? The discs are 250mm so I know those wheels won't work on the SX without changing forks but wondering if can use SX discs on those wheels to make them work.
@@PochiRS Yeah changing the insides should be possible. I've seen it done with an Aprilia MX before. For the swing arm change you'll need the shock and linkage from the RX aswel. With the Intake for the bigger carb. HTM Racing sell it but it isn't cheap. Some guy on ebay in Italy for bit cheaper but not sure about postage etc.
I had forgotten HTM Racing existed. I bought an intake manifold for my SX125 from them last year. Unfortunately, I can't use it on my RX125 because the carburetor bore is different. As for replacing the swingarm, there's a whole body, so it's not like I'm missing any parts.
@@PochiRS Yeah they should be able to make a 34mm. Apparently some older KTMs used the same bolt pattern but not sure if it will line fully up with airbox.
Hi Pochi, Do you still have the Honda NSR 250 MC21? I would like to know some measurements of the left exhaust (models like Tyga Excb-0005L or 0006LA, they seem adaptable for 1 cylinder engine), I want to try a nsr250 tyga on a 160 Polini kit engine (revised and worked on the ducts) for Cagiva Mito, and I noticed that some Honda exhausts work perfectly on Cagiva, and I need to know these measurements: internal diameter of the cylinder connection manifold (about 42mm?), final pipe diameter (23mm? before silencer after the exhaust chamber) and central cone diameter (also circumference), and the total length of the exhaust (I estimate around 80cm?) without the final pipe section before the silencer
@@PochiRS I mean you could've just bought a swingarm off ebay or something from a MX125 for a lot less :D I guess the swingarm is going on the SX yeah? Btw you need to swap linkage+shock over as well. Otherwise a direct fit, though the extra tank on the shock might cause fitment issues with the exhaust, it's a bit different in size to the SX standard one.
You say it's cheaper to buy the swing arm alone? Not true, if you install the SX125 swingarm on the RX125 and sell the RX125, you will pay zero for the parts, that's my plan. The RS and SX have different sized wheels, so we will have to see what happens as a result of replacing the swing arm, and if the posture worsens, this plan will be scrapped.
@@PochiRS The size of the wheel is of no concern... The thing is all aprilia 125 enduro/supermoto bikes use the exact same frame geometry since this particular model of RX. MX, SX and RX share the geometry and many key dimensions. So fork swaps, swingarm swaps everything is possible. The aprilia MX uses the exact same swingarm and it has the same rear wheel as the SX... I dunno about you but I wouldn't buy the RX if it had those horrid SX parts put on it instead of the nice original shock+swingarm. And the size difference of SX and the insanely heavy RS wheels is not huge... yeah custom spacers and you need spacers to fit the 17mm axle instead of 20mm..
Are differences in wheel outer diameters unaffected? Thanks for letting me know. I'll check the difference between the swing arm and the linkage, respectively.
I don't agree with this operation. It sounds like to use a Yamashiro period Katana to cut the ham. No way, I disagree.
It pains me to hear you say that.
I bought this RX because I only wanted the swingarm.
As others have said, who would want an RX with a steel swingarm?
But what should I do? I'm going to have a hard time.
@@PochiRS you must search for a spare used swingarm, it's plenty on the net and it is relatively cheap.
Nice, 123 aswel with the adjustable shock and forks. Bike looks good for its age. There any chance you can see if bolt pattern/size is same as SX? The discs are 250mm so I know those wheels won't work on the SX without changing forks but wondering if can use SX discs on those wheels to make them work.
I just got the RS125C two days ago, so I'll have to check it out, but as for the front forks, I'm hoping I can just reassemble what's inside.
@@PochiRS Yeah changing the insides should be possible. I've seen it done with an Aprilia MX before. For the swing arm change you'll need the shock and linkage from the RX aswel. With the Intake for the bigger carb. HTM Racing sell it but it isn't cheap. Some guy on ebay in Italy for bit cheaper but not sure about postage etc.
I had forgotten HTM Racing existed.
I bought an intake manifold for my SX125 from them last year.
Unfortunately, I can't use it on my RX125 because the carburetor bore is different.
As for replacing the swingarm, there's a whole body, so it's not like I'm missing any parts.
@@PochiRS Yeah they should be able to make a 34mm. Apparently some older KTMs used the same bolt pattern but not sure if it will line fully up with airbox.
Hi Pochi, Do you still have the Honda NSR 250 MC21? I would like to know some measurements of the left exhaust (models like Tyga Excb-0005L or 0006LA, they seem adaptable for 1 cylinder engine), I want to try a nsr250 tyga on a 160 Polini kit engine (revised and worked on the ducts) for Cagiva Mito, and I noticed that some Honda exhausts work perfectly on Cagiva, and I need to know these measurements: internal diameter of the cylinder connection manifold (about 42mm?), final pipe diameter (23mm? before silencer after the exhaust chamber) and central cone diameter (also circumference), and the total length of the exhaust (I estimate around 80cm?) without the final pipe section before the silencer
If you are requesting work from me, please offer me a reward.
I can’t wait till this is modified that much you can’t tell what bike it is any more
I hate to say it, but all I wanted was this RX125 swing arm. So I plan to sell it once I remove the parts.
@@PochiRS I mean you could've just bought a swingarm off ebay or something from a MX125 for a lot less :D I guess the swingarm is going on the SX yeah? Btw you need to swap linkage+shock over as well. Otherwise a direct fit, though the extra tank on the shock might cause fitment issues with the exhaust, it's a bit different in size to the SX standard one.
You say it's cheaper to buy the swing arm alone?
Not true, if you install the SX125 swingarm on the RX125 and sell the RX125, you will pay zero for the parts, that's my plan.
The RS and SX have different sized wheels, so we will have to see what happens as a result of replacing the swing arm, and if the posture worsens, this plan will be scrapped.
@@PochiRS The size of the wheel is of no concern... The thing is all aprilia 125 enduro/supermoto bikes use the exact same frame geometry since this particular model of RX. MX, SX and RX share the geometry and many key dimensions. So fork swaps, swingarm swaps everything is possible. The aprilia MX uses the exact same swingarm and it has the same rear wheel as the SX... I dunno about you but I wouldn't buy the RX if it had those horrid SX parts put on it instead of the nice original shock+swingarm. And the size difference of SX and the insanely heavy RS wheels is not huge... yeah custom spacers and you need spacers to fit the 17mm axle instead of 20mm..
Are differences in wheel outer diameters unaffected?
Thanks for letting me know.
I'll check the difference between the swing arm and the linkage, respectively.
if you sell the complete plastics and saddle I'll gladly buy them, do I have an axle if you don't want to ruin this rx?
If you buy it for more than 750 euros including shipping, my loss will be minimal, is that worth considering?
Payment method is Wise.
Will the wheels fit my 2006 mx125
I do not know it.
I don't know much about it at all, but I got the RX.
Hi, where are you from please? I wil take whole aprilia!
From Japan.
There are some parts I need, so I can't sell you the whole thing. Besides, there are size restrictions on carriers.
Vendi la moto intera? Per i pezzi come ti troviamo su ebay?
Avevo intenzione di mettere in vendita i miei oggetti su ebay, ma ora sto avendo problemi a configurare payoneer.
Where we can find you on ebay? What's your name as seller please?
I haven't registered yet.
I'm still learning about ebay.
For reference, what do you want and for how much?
Let me know with part numbers.
How much do you want?
Let me know so I can use it as a reference.
Multiple large parts would make shipping more difficult and expensive
I don't think it's a bad suggestion, but more than half of that would be shipping.
Give me your email address and I'll get back to you.
Sorry.
I didn't know that.
I also created a facebook account, but I don't want to post it here because I don't want it to be too well known.
Vendi la Rx?
Considererei la possibilità di venderli come componenti.
Mi dai un contatto telefonico?
HI can you sell me the saddle and plastics?
I'm trying to learn how to list on ebay right now.