I like Chris’ dry sense of humor.
Everyone should show up and look like dougo one morning and wait for him to come in.
Chris if you see this just know we miss you. Hope you are doing very well back home. But you will be missed for quite some time brother. Love the chicken pot pie shirt. 👕 so wishing you all the best
I like Chris .he's one of the guys you'd give a job .good lad .
Brody is stepping up in farming attire! Nothing wrong with that
Welcome back, Chris, your quiet smile has been missed!
The Chicken Pot Pie shirt is awesome!!!
Chet Dougo Eric Broodie and great to see Chris great explanations on the sprayer and the digger and turffic saving money on pump for digger those heavey duty diggers are looking also like a money saver great job guys
It's always a good video when we get to see Chris
Hello from Switzerland Of Ohio!! That dude ,man,friend,... is straight up awsome !! Do like his speak!! VERY SMART!
Nice to see Chris back, even if just for part of a video. One can see why he is in the friend group.
It's great to see Chris again 👏 👍 😀
I agree with Chris. No training wheels ! Glad to see him again
DO recommend a PULL Type tile plow.
Mounted Frame tile plows put major load on the rear half of the tractor.
Great to see Mr Iowa returning for a Guest Appearance.
Another great video Chet. You guys get the work done. It sure was good to see Chris again. 👍❤️
It was great to see Chris
Chris is a good dude!
Tell him Chris we love his t-shirt. Chicken Pie!😆
Always good seeing Chris. Top notch guy.
Welcome back Chris. Good to see you back in the videos.
Great Person, always willing to do whatever is needed. Nice to see him again.
Git a longsleeved Carhart or a denim shirt and put enough starch into it so that it will stand by itself (extremely stiff ) and then place that by your welding machine, then when you have to weld something slip into that shirt. The starch will allow the welding beads to roll off. It is a whole lot lighter and a whole lot cooler than leather.
We used to weld triangular pieces into the corners of the frame where the breaks appeared.
Never had a problem again.
great to see Chris and the mini- Dougo! so awesome
Great to have Chris back! Thanks guys.
Chet, you, Dougo & BS need to pay Chris a visit after the FPS this year! Great to see Chris & he always has the best shirts!
Chris is one grea friend. The best.
Great to see Chris and.. Brody being mini Dougo is AMAZING
Yes Brodie, need to get you some South African shorts and vellies (leather shoes)
So nice to see Chris back; the more the merrier!
I’m going old-fashioned holy moly he’s back good to see him
That one shot of you 3 relaxing after the welding was done reminded me of, the 3 hillbillies setting on the porch in the summer heat passing the crock shine jug around.
Great to see Chris again.
Just a thought on spare tire mount, weld nuts to digger frame , easier to throw tire up onto area then thread rod down to tighten. Cover with an rv or jeep spare tire cover
Never clicked on a video faster than to find out if Cris is back
You do pretty well for Farmer Welder Chat!!!Welding is absolute!! Invaluable on farm! Great job.!! This is great video.!! AWS!! Yes trying to type while I wath!! Not to bad for 1/2 blind!! Best prayers to youall!!😊
I hope he come more often in the channel, looks like a realy good guy
Glad Chris is doing well. Deere should survey farmers to find out how to reinforce their high priced equipment’s weak spots.
Thanks for another great video Chet and crew. It was interesting and enjoyable to watch.
Really good to see Chris!!!!!! Wish he was full time with you folks but understand he has responsibilities in Iowa. Great to see him and he had time to try out the new Apache sprayer. Believe he really enjoyed the new sprayer and had a different opinion of it after doing a test drive.
Safe journey home to Iowa Chris. Was good to see you again!!!!!!!! Come back soon!!!!!!!
Lots of repair work to the big green digger that Randy normally uses. I am surprised you and Eric were able to bend that heavy steel piece back to original again. Nice work you two. Digger looks good after all the repair items were done. Great idea to mount an extra wheel and tire on the digger for emergencies!!!!!!!!
Great idea guys.
About it I guess. Thanks for everything Larsons!!!
You all take care.
The Iowa farm boy. Steve.
Amazing video guys. thank you
Chris is back 🎉🎉🎉🎉
Great to see Chris back need him full time!!! Chet keep up the great content!!!
1youalls best videos.!! Rite dere with the long back rescue n get de pontoon outta the lake.!! Love youall!! N Thank youall...
Nice to see Chris again.
it was good to see Chris !! its too bad that he cant come back full time he is a good hit for the farm
Great to see ya ,Chris can't wait to see ya next time.
Good to see Chris again
Great content, as always! Nice to see Chris again, too bad he could not stay longer.
It’s good to see Chris back. Great video great content good job chet and the crew.
I hope Your Apache worked better for You!! We became a dealer for Apache and sold 15 to 20 sprayers and oh what a night mare!! 😡 Don’t remember the exact number but we replaced a pile of transmission thankfully under warranty! And that was just the start of the never ending trouble with them!! We finally said enough is enough and stopped selling them. We were busy enough in the shop we didn’t need all this extra work! So I hope things have improved with them and they are more reliable!!
Awesome video Chet and Larson Farms!!
Gotta appreciate the man's shirts too! Always the clever one!
The tip you need for the gas torch is called a pepper pot , and they go through the very fast ,but they can heat large areas very quickly .
You always say you don’t like self propelled sprayers because of their tank size. You should check out Horsch sprayers. They have tank sizes very close to your tow behind sprayers
Good to see Pacar Chris back
That field is reverting back to what it was before 1800
Welcome Back Chris!!
No no no! You have heard the saying “you have a face for radio” right… well Brode has “the legs for long pants”! No cut-offs. 😎😎
Sorry Brode… I couldn’t resist.
Good stuff guys, good to see Chris again 😊😊
There are pumps who can pump ,,dirty water,, ( like fouled with leaves etc). There are even pumps who chop up debris before transfering it.
Would be a nice touch if you put one of those texas crude oil pumps ( we call then yes nodders) there. They will transfer everything because of their simplicity.
Thats the trick. Overbend it a little to much so it veers back straight.
For welding there are also loose sleeves.
Awesome to see Chris Great guy. Great video’s
It's a good thing you have your channel to keep up with the run away repairs on the red and green stuff.
Chet! When layin down "lightning metal" in the summer, put the jacket on backwards to vent the heat. If position allows it.
Great vid guys yep going seeing Chris again !
OMG……Chris’ shirts are epic!
@ 22:11 that pice of metal is off of a sangle tree that is used to hook up a horse to a plow.
Gotta love Chris's shirts😂😂
Great to see him again! Wish he was staying
Thanks 👍
most RVs have covers for spare tires
:)
We ain’t got no hot springs, but we got some cold springs for you Big Swede. Come on down to Florida.
Chris!!! Yay!
Chris and his shirts. 🤣 Chicken Pot Pie 🐥🫖🥧
Millenial had a guy with drone demo that can spread cover crop on land to wet for tractors, also spread chemicals. Interesting video.
Judging by the picture you are using either the light-duty or the medium-duty torch, if you are planning on using a rosebud you need to consider upgrading to the Journeyman350 for what the latest heavy-duty model is called.
Brody looked like the dnr sneaking up on me when I'm fishing the ponds.
The lid Snaps back on easily, I've used coolers like that. 😊
If it's a hollow lid,pop out the plugs and 15:56 fill it with "Low expansion" Spray foam, the ice lasts all day.
Get a Welder's Smock with Long Sleeves and leather shoulder pieces. Go to a welder supply. 25:07
Keep thinking it’s dougo but nah it’s brodo looking sharp Good to see Chris 👍
We want more Chris, we want more Chris! 😊
You ever think of planting wild rice in the flooded field. Great video as always
I am pretty sure you can always find green parts online much cheaper then the dealer. And honestly it’s any parts any color. But that 1” thick plat Steel part that was bent you could have made probably much cheaper then buying it. Any structural steel , any place with a water jet table or plasma table. But I would have had one made while it was off. Then again I have places here where I live to get parts made maybe you don’t have anywhere close to get it done. But anytime you don’t need the parts really quick I would be looking online for parts as much as possible. Every dollar saved is a dollar earned.
CHICKEN POT PIE! Leave it to Chris to have the best shirts on the farm! He has my sense of humor! Jeff -the Gunsafe guy in Brainerd!
love that chicken shirt.
You can get hard surface welding rods and do the sweeps yourself
A mini Dougo, luv it
I wish you guys could get Chris and Jordan full time. I know you could use the help. I know they have their own lives elsewhere, they are good workers and fit in well there.
we owned 3 apache sprayers they are good farmer sprayers i won’t say anything bad about it, but we bought a new john deere 416R with 1600 gallon tank it is on another level the ride and hydro is excellent and i thought the auto booms were a little smoother, apache was nice but it would be very hard to go back after running the new deere
Chris in Shicken pot Pie tee shirt, looking good.
We need a chet, brodey, Eric weld bead contest! I must admit ! Chet has gotten pretty darn good!
As always it was a awesome video guys. It's kool watching you young men working together the way you do when there's so much negativity in the world today. 🚜🚜🚜
Go team Larson !!!
Eric check out Banff hot springs or Radium hot springs in BC
Was that rock tray on the front of the case still full ? Nice of case to return them considering how much you spent !!!
Just a thought. Look at C & C equipment, u-tube, they have a computerized metal plasma? cutter that will handle 4 X 8 metal sheets. That and a metal lathe, you could make your own parts instead of ordering from dealers. ??? You do a great job, like to watch all your jobs :)
Wow all this water. Have you put any thought into Fish Farming 🤔🤷♂️😎
Is Brody brown nosing Dougo? Must want a raise!
Always appreciate a visit from Chris!! 🎉