Elyse your work is very beautiful, I'd love to try to make a balloon but have had many failed attempts using plaster of paris and also other plaster. can you please tell me what the plaster mix is that you use and the ratio? are your balloons latex or specially coated inside? I'd be so pleased if you could let me know your recipe ;)
I use hydrocal plaster--it has a little more give to it when it sets and is very hard once fully cured. The plaster mix ratio is 45g Water to 100g Plaster. You will have to experiment with scaling the ratio to the size of your balloon mold. My success rate when I began was probably around 10%--it's not easy. Air temp is factor as well. Good luck!
Gracias !!🌹por tu respuesta! Si , debo experimentar soy si artesana y cada día me maravilla más las hermosas técnicas todo quiero hacer !!! Te consulto es solo yeso y agua? No lleva algo más entiendo que solo muestras lo que tú haces y no vas a dar enseñanzas , y lo de adentro que le pones es resina trasparente ? Con color o es otros productos ? Disculpa 🌹🌹🌹🌹🌹mil rosas para ti !!eres Fabulosa!!me encantan
I love your art, so Beautiful and the finishing touch with resin dripping down. I have some questions Do you use white cement? And What type of balloons you use?
Randi Öhman Hi again Elyse i have bought Lightweight Hydrocal plaster and round balloons in latex 48 cm in dia. I read that you use 100g plaster and 45g water to your balloon. In the your movie it looks like you have double the amount. I wood realy like to know how much you have to one balloon? Grateful for answer. Randi
@@randiohman4766 Hi Randi. The ratio is 45g water to 100g plaster, but you will have to scale the ratio to the balloon size you use. This is an experimental process! Helpful tip: I always under inflate the balloon. Good luck!
I enjoy the process of creating too, not knowing the outcome. I work with metal, however lately I have been working with other materials too. Love your work! And Eits is my favourite band to listen to when I work XD
Lol. it is funny to see you doing this process... I "invented" this method for me not knowing what I am doing and not looking for someone else who did it before. I was experimenting how to produce plaster balls. But iI am filling the balloons with air and then use a bottle with liquid plaster to fill the plaster into the balloon. And afterwards i stabilize everything with epoxy. It is so much fun to make the balls (and it is so much mess if the balloon explodes...) Thanks for showing
ehehehehe....In fact this girl thinks that she invented something new, but she did not invent anything at all! I have done this work for over 30 years. Before she was born! I also laughed a lot the way she creates suspanse and this is already very common!
@@mariafaias8078 Hello dear Angelina i am Katerina from Greece and i want to make this but i do not know exactly the ingredients i am reading here about epoxy resin and plaster.If you know details about it and how much is the right amount of the ingredients and you want to share with me it could be very helpfull.Thank you.
@@mariafaias8078 I wish people could post their projects online without the "dissing". She is sharing a process - I didn't gather that she felt she "invented" anything but who really cares?
Dust collectors... I have been making them and buying them my entire life. A lot of the glass pieces I have created at very fragile and serve no function other than to hopefully create a smile. Very beautiful. I bet that a dental drill (or Dremel) could be used to let both light and the internal resin to flow through. Nice work young lady.
@@brianbassett4379 Hello ? Brian if you find this mesage PLEASE PLEASE REPLY ILL WAIT AS I READ ALL MY MESSAGES IN NOTIFICATIONS… You ask this woman artist if she ever used cement in her 🎈 balloon & I need to KNOW WHAT SHE DID USE BUT CANT SEEM TO FIND THE ANSWER HELP PLEASE?!7-11-23
Your video is quite inspirational and the outcome is stunning. I'm about to venture and recreate what you made. Quick question, how many minutes do you keep rotating the plaster and balloon before you set it on the table to have a "base"? And (if you have used colored latex balloons) does it stain the plaster if you leave it too long? I have never worked with these materials and I'm quite nervous. Thanks in advance!
Hi There. I don't time the casting process as heat and humidity are a factor. It is really just something you have to practice and get the feel for. I like using clear balloons (though the color of the latex will not transfer) so I can see if the plaster is running down the sides of the balloon--if so, keep rotating! Good luck and have fun (and expect some failures!)
@@ElyseGraham Thanks! The wild fires aren't helping with my "Prime" deliveries. It's been week now. The whole PacNW is so smoky right now. I'm scared of balloons popping. I will order an overall. lol.
@@allinone1az100me too still waiting for an answer I believe she used plaster of Paris of gypsum in the balloon 🎈 the resin I’m not sure about as it is new to me also …
Can unplz tell me why mine didn't work? Once i filled it with plaster of Paris, i let it set for long time. Once i go & touch the balloon it started cracking on the inside. Smh i did wat these VIDEOS did but theirs hardened mine wasn't hard enough i guess. Wat did i do wrong? 6times too many fails.
I’m almost afraid to ask but ……. please … please … what kind of plaster did you use for the balloon 🎈 was it plaster of Paris ? Gypsum ?? I hope you reply anyone ????? I’ve been needing this answer for 5 MONTHS !!! Please 🙏 reply ???? 7-11-23
So that was it? What was the end result for adding the colors inside? Do you add lighting inside to see the colors she added? Seems like a lot of work adding colors just to have I a tiny bit of it sticking out.
Think about the subtlety that this technique offers. If it were just another colorfully splashed up structure you wouldnt blink an eye. Here the artist gives you just a hint of color (as well as the illusion of dripping up) to draw you to the piece to have a closer look. Simple and clever.
@@renatamuras1058 It still doesn't answer my question. Is it a sculpture? A vase? I wouldn't not see a purpose for this item unless it was a sculpture as it is very large circle with a very small opening except for it being a vase. I'm sorry. I'm not trying to offend or insult the artist's work as she obviously takes pride and time with her work. I'm just wondering what the item is.
@@the12makeit A form, sculptural (background in the arts mostly sculpture). I however ended up almost dead from the class of chemicals she is using (epoxy resins) as even with a mask they are highly toxic (industrial fans to exhaust highly recommended). That said, have you ever been out and about and saw a "hint" of something, that piqued your curiosity. MHO that is what this hint of color does. As another stated - Renata, it spurrs one on to look inside for a burst of what prior was hidden color.
@@katerinanal8059 I guessed you missed the part where I mentioned I ended up almost dead from the epoxy resins. I didn't use them so much but they were at the college I was attending at the time. I was "vegetative" for years and ended up on permanent low SSD (I was in my 40's). Since the class of chemicals or related are found in fragrance products (synthetic which most are, shampoos, perfumes, colognes so on) it leads to sheer isolation. Chemical injury and over 79 million people have this or are dead. Even after they are "cured" (dried) they still off-gas. I had a friend used resins to cast a larger female sculpture. The person who bought it returned it as it caused skin eczemas. They are very beautiful and tempting I know. I am spending some time researching for non-toxic products to create a similar effect. My background included research in medical and legal areas - but I miss the NYC library where one could find older "moulage" books (casting and sculpture) That said the artist would know or one can look this up.
Hola !!te sigo siempre desde Uruguay 🇺🇾 solo una consulta se que es yeso pero como es la técnica del preparar el yeso y cuántos rato dejar dentro del globo?
¡HOLA! Gracias por tu pregunta. Tendrás que experimentar con la proporción de yeso y agua dependiendo del tamaño de tu globo. Cuando sientas que el yeso comienza a espesarse, es hora de dejar el globo. Calculo que son unos 11 minutos. ¡Buena suerte!
I remove the balloon very carefully using a sharp blade once the plaster has set and cooled. This is not an easy process. I have better luck in cooler weather. When the air and water are too warm the plaster tends to set up too quickly and then breaks. Good Luck!
Esse processo exige muita prática. Você deve experimentar a proporção de gesso para o tamanho do balão. Comece pequeno. Não há necessidade de colocar o gesso no sol, ele irá definir por conta própria. Você não quer que fique muito quente. Boa sorte!
J'utilise du plâtre pour couler les ballons puis de la résine à l'intérieur pour les renforcer. Les quantités dépendent de la taille du ballon que vous utilisez. Vous devrez expérimenter! Bonne chance.
Hi Elyse, I run workshops for young carers (children) in the UK would you be able or willing to share what balloons you use? I have tried several types in the past but never found any that appear like the ones you are using. Any advice would be welcome. Thanks in advance for your help. Russell
Hi Russell--I use qualatex balloons. The ones in this video are 36" diameter, but are underinflated so the latex is thicker. Good luck and hope this helps :)
@@ElyseGraham Thanks Elyse, we have used Crystal R plaster for other projects. We are hoping to turn these into large candles with some holes to see the coloured wax through. I will keep you posted. The balloons to date have been an issue but I’ll check them out. Your work is amazing by the way. Especially love your use of resin.
Elyse, wow! Wow! What a beautiful arts & crafts you put into that magnificent bubble vases! Simply amazing!!! Thank you for sharing.
Thank you!
Thank you Elyse for your prompt reply. I will be trying this this summer.
buenisimo
Quanto profissionalismo e perfeição😍, até a gravação é de uma qualidade espetacular 👏👏👏👏
buenisimo
These are absolutely beautiful! I love the addition of resin.
thank you :)
buenisimo
wow absolutely lovely.. creativity is incredible..you are lucky to have this to who you are in life..thank you for this video..so nice !
Big fan of your artistic talent. Thank you for sharing it with us.
Thank you, Kayan.
You are awesome thanks for sharing your mad science experiences. Fantastic.
Thank you! :)
Great work! Which resin did you use? Can you tell me how much resin do you need for one vase and how many layers you put in?
Beautiful short tutorial and easy
Hi I'm from Brazil, it was amazing to see your video, I've just signed up myself, congratulations.
Thank you, Juarez :)
Dear god....I was mesmerized. STUNNING work and video. Gail Plymouth Devon .
buenisimo
Hi..I am from Indonesia
Amazing...its soo creative
I like it,the simple work Tutorial,good for decoration.
Thank you so much!
I love your work its so hard to put the cement in the balloon
your work is so beautiful. what material do you use to give this shine, it looks like glass, I thought it was, I'm amazed
Thank you :) The interior of the vessel is resin.
Elyse your work is very beautiful, I'd love to try to make a balloon but have had many failed attempts using plaster of paris and also other plaster. can you please tell me what the plaster mix is that you use and the ratio? are your balloons latex or specially coated inside? I'd be so pleased if you could let me know your recipe ;)
I use hydrocal plaster--it has a little more give to it when it sets and is very hard once fully cured. The plaster mix ratio is 45g Water to 100g Plaster. You will have to experiment with scaling the ratio to the size of your balloon mold. My success rate when I began was probably around 10%--it's not easy. Air temp is factor as well. Good luck!
@@ElyseGraham thank-you I will endeavour to succeed ;)
buenisimo
@@magentamagenta1274 Were you successful?
Wow this is so cool! Love it!!!
Thank you!
Talented lady stay safe Godbless im your new subcriber
Gracias !!🌹por tu respuesta! Si , debo experimentar soy si artesana y cada día me maravilla más las hermosas técnicas todo quiero hacer !!! Te consulto es solo yeso y agua? No lleva algo más entiendo que solo muestras lo que tú haces y no vas a dar enseñanzas , y lo de adentro que le pones es resina trasparente ? Con color o es otros productos ? Disculpa 🌹🌹🌹🌹🌹mil rosas para ti !!eres Fabulosa!!me encantan
Awesome idea!!
I love your art, so Beautiful and the finishing touch with resin dripping down. I have some questions Do you use white cement? And What type of balloons you use?
Hi Randi--thank you for the kind words. I use hydrocal plaster and latex balloons.
Randi Öhman Hi again Elyse i have bought Lightweight Hydrocal plaster and round balloons in latex 48 cm in dia. I read that you use 100g plaster and 45g water to your balloon. In the your movie it looks like you have double the amount. I wood realy like to know how much you have to one balloon? Grateful for answer. Randi
@@randiohman4766 Hi Randi. The ratio is 45g water to 100g plaster, but you will have to scale the ratio to the balloon size you use. This is an experimental process! Helpful tip: I always under inflate the balloon. Good luck!
You have created an excellent way of casting from baloon.
1.
Was it Plaster of Paris
& also kindly
2.
confirm name as well as purpose of resin used.
Beautiful! How would you ship one? They seem fragile to be able to ship?
beautiful work
Thank you :)
Your art is beautiful thank you for sharing
buenisimo
Beautiful. Are these for sale?
Wat is dit geweldig mooi. Maar mag ik vragen, is het model gips.
Hi .
Love your work !
For an orb that big ,what are the quantities ?
Promise to show you,how i did !
Hello, your vases are beautiful. Are they waterproof? Thank you für answer!
I enjoy the process of creating too, not knowing the outcome. I work with metal, however lately I have been working with other materials too.
Love your work!
And Eits is my favourite band to listen to when I work XD
that's awesome! Thanks for sharing :)
buenisimo
Lol. it is funny to see you doing this process... I "invented" this method for me not knowing what I am doing and not looking for someone else who did it before. I was experimenting how to produce plaster balls. But iI am filling the balloons with air and then use a bottle with liquid plaster to fill the plaster into the balloon. And afterwards i stabilize everything with epoxy. It is so much fun to make the balls (and it is so much mess if the balloon explodes...)
Thanks for showing
ehehehehe....In fact this girl thinks that she invented something new, but she did not invent anything at all! I have done this work for over 30 years. Before she was born!
I also laughed a lot the way she creates suspanse and this is already very common!
Sascha LB a
@@mariafaias8078 Hello dear Angelina i am Katerina from Greece and i want to make this but i do not know exactly the ingredients i am reading here about epoxy resin and plaster.If you know details about it and how much is the right amount of the ingredients and you want to share with me it could be very helpfull.Thank you.
@@mariafaias8078 I wish people could post their projects online without the "dissing". She is sharing a process - I didn't gather that she felt she "invented" anything but who really cares?
@@mariafaias8078 I'd love to see your video
This is fascinating
excelente amiga muy bueno
Beautiful 👏 Does the resin strength the pot so it’s not so fragile and can be decorated?
Yes--the resin bonds with the plaster and makes it MUCH stronger!
Hi there Great video are you using plaster of paris
Hi and thank you. I'm using Hydrocal plaster.
Very interesting. Ti pokreti, lakoca, jednostavna lepota. Hvala💚
thank you :)
Beautiful pots
I love love art I want to be this good, just learn something different 😌 nuce awesome
Wow impressive video.
that is me as well, not sure how it will work out, but I love the process
Is this plaster of Paris or is it plaster with longer open time? Love trying new ideas these are inspiring.
Thank you for reaching out. It's a type of plaster called hydrocal.
Thanks, I have used it in the past and will attempt the balloon idea and cross my fingers.
Can I use plaster of Paris ?
Hi there just wondering were do you buy your balloons from and what size regards David
Very nice! 👍
How many plaster of paris are u usin g and how many water please..thank u for stuning artworks
buenisimo
Was für Material nimmst du zum Gießen?
Por favor, traduce tus trabajos!! Soy latina y no entiendo tu idioma☹️Gracias!!
Lo siento, no creo que pueda hacer eso.
@@ElyseGraham ok
@@ElyseGraham
beautiful ❤️
I am also a vases desinger
th-cam.com/video/eKBZPReOU1w/w-d-xo.html
Συγχαρητηρια στην Δημιουργο Υπεροχα
Ευχαριστώ
Sehr schön!!
Gracias por compartir felicidades Bendiciones
Very good idea u shared thanku u....lot lot Iam from India Belgaum.... Karnataka.
Interesting process but what material was that? No explanations or details.
Very interesting and educational.
Thanks for sharing
buenisimo
Beautiful - thank you so much for sharing
buenisimo
Dust collectors... I have been making them and buying them my entire life. A lot of the glass pieces I have created at very fragile and serve no function other than to hopefully create a smile. Very beautiful. I bet that a dental drill (or Dremel) could be used to let both light and the internal resin to flow through. Nice work young lady.
Thank you for the insight.
@@ElyseGraham I'm sure it's nothing you haven't thought of before. Ever try this with concrete?
@@brianbassett4379
Hello ? Brian if you find this mesage PLEASE PLEASE REPLY ILL WAIT AS I READ ALL MY MESSAGES IN NOTIFICATIONS… You ask this woman artist if she ever used cement in her 🎈 balloon & I need to KNOW WHAT SHE DID USE BUT CANT SEEM TO FIND THE ANSWER HELP PLEASE?!7-11-23
Spectacular ji.. Master Class..
buenisimo
Hermoso!!!!!!!.. Dios bendiga tu talento!
Muchas Gracias
Your video is quite inspirational and the outcome is stunning. I'm about to venture and recreate what you made. Quick question, how many minutes do you keep rotating the plaster and balloon before you set it on the table to have a "base"? And (if you have used colored latex balloons) does it stain the plaster if you leave it too long? I have never worked with these materials and I'm quite nervous. Thanks in advance!
Hi There. I don't time the casting process as heat and humidity are a factor. It is really just something you have to practice and get the feel for. I like using clear balloons (though the color of the latex will not transfer) so I can see if the plaster is running down the sides of the balloon--if so, keep rotating! Good luck and have fun (and expect some failures!)
@@ElyseGraham Thanks! The wild fires aren't helping with my "Prime" deliveries. It's been week now. The whole PacNW is so smoky right now. I'm scared of balloons popping. I will order an overall. lol.
Hi... very nice work...i am interested to try this... what is that solution you used and how to make it
@@allinone1az100me too still waiting for an answer I believe she used plaster of Paris of gypsum in the balloon 🎈 the resin I’m not sure about as it is new to me also …
BEAUTIFUL! What type of resin do you use?
thank you! I use urethane resin
Amei!!!
Vou tentar fazer🤗
marta schott th-cam.com/video/B96n-R5q3mM/w-d-xo.html easy Glass bottle painting. Please subscribe to my channel 🙏
Very Nice 👍
Bellissimeeee... scusa me sono di cemento? E cosa hai messo dentro per renderle resistenti?
I palloncini sono fusi con intonaco e quindi verso resina all'interno per rinforzarli.
@@ElyseGraham grazieeeeee
Шикарные шары. Только я не поняла как их будут использовать.
Спасибо. Это вазы.
would love to see more of your vase process ... would love to share some of my work inspired by you...
buenisimo
Terry Mancini th-cam.com/video/B96n-R5q3mM/w-d-xo.html easy Glass bottle painting. Please subscribe to my channel 🙏
This is amazing
thank you!
Can unplz tell me why mine didn't work?
Once i filled it with plaster of Paris, i let it set for long time.
Once i go & touch the balloon it started cracking on the inside. Smh i did wat these VIDEOS did but theirs hardened mine wasn't hard enough i guess.
Wat did i do wrong? 6times too many fails.
Meditation.... amazing feeling 🙏
buenisimo
very cool! Where can you use these plaster balls?
What kind of ballon and gips you use??
I tried with a balloon, but it explodes on my face¡ what kind of ballons you use?
Bellissimo, si possono avere i sottotitoli in italiano? Grazie
Can we glow it with lights inside?
You can try! The plaster is usually uneven, so the light might not be consistent.
Bonjour c'est très joli,mais combien mettez vous de platre blanc et d eau 😊
What is the brand of the white cement?
Great job👍👍👍👍👀🙌🌹
Hi Elsy can l use epoxy risen out side gesso vase
Can i use white cement only
Lindo trabalho, parabéns!
Boa tarde querida ,que número de bola é está? Vc pode mim dizer agradeço ❤️
Awesome
WHAT ARE THE MATERAILS TO BE USED PLZ?
i learned something thank you
So happy to hear that!
Stunning really! I am just curious about the masks that you wear? Are you using toxic materials? x
Hi! I wear a dust mask for the plaster and an organic vapor mask for the resin. Neither material is toxic, but both are respiratory irritants.
?
Those would make great lamps
What material did u use at first to fill the balloon?
plaster :)
I’m almost afraid to ask but ……. please … please … what kind of plaster did you use for the balloon 🎈 was it plaster of Paris ? Gypsum ?? I hope you reply anyone ????? I’ve been needing this answer for 5 MONTHS !!! Please 🙏 reply ???? 7-11-23
So that was it? What was the end result for adding the colors inside? Do you add lighting inside to see the colors she added? Seems like a lot of work adding colors just to have I a tiny bit of it sticking out.
Think about the subtlety that this technique offers. If it were just another colorfully splashed up structure you wouldnt blink an eye. Here the artist gives you just a hint of color (as well as the illusion of dripping up) to draw you to the piece to have a closer look. Simple and clever.
@@renatamuras1058 It still doesn't answer my question. Is it a sculpture? A vase? I wouldn't not see a purpose for this item unless it was a sculpture as it is very large circle with a very small opening except for it being a vase. I'm sorry. I'm not trying to offend or insult the artist's work as she obviously takes pride and time with her work. I'm just wondering what the item is.
@@the12makeit A form, sculptural (background in the arts mostly sculpture). I however ended up almost dead from the class of chemicals she is using (epoxy resins) as even with a mask they are highly toxic (industrial fans to exhaust highly recommended).
That said, have you ever been out and about and saw a "hint" of something, that piqued your curiosity. MHO that is what this hint of color does. As another stated - Renata, it spurrs one on to look inside for a burst of what prior was hidden color.
@@sazure2 Hi dear do you know how much epoxy resin and how much plaster is using?i want to make it but i do not know the basics.Thank you.
@@katerinanal8059 I guessed you missed the part where I mentioned I ended up almost dead from the epoxy resins. I didn't use them so much but they were at the college I was attending at the time. I was "vegetative" for years and ended up on permanent low SSD (I was in my 40's). Since the class of chemicals or related are found in fragrance products (synthetic which most are, shampoos, perfumes, colognes so on) it leads to sheer isolation. Chemical injury and over 79 million people have this or are dead. Even after they are "cured" (dried) they still off-gas. I had a friend used resins to cast a larger female sculpture. The person who bought it returned it as it caused skin eczemas. They are very beautiful and tempting I know.
I am spending some time researching for non-toxic products to create a similar effect. My background included research in medical and legal areas - but I miss the NYC library where one could find older "moulage" books (casting and sculpture)
That said the artist would know or one can look this up.
Hola !!te sigo siempre desde Uruguay 🇺🇾 solo una consulta se que es yeso pero como es la técnica del preparar el yeso y cuántos rato dejar dentro del globo?
¡HOLA! Gracias por tu pregunta. Tendrás que experimentar con la proporción de yeso y agua dependiendo del tamaño de tu globo. Cuando sientas que el yeso comienza a espesarse, es hora de dejar el globo. Calculo que son unos 11 minutos. ¡Buena suerte!
What type of plaster is this?? 💗
How mutch of everything do you need if I wanna try it at home?
Did cement causes acne on face or taning
Parabéns lindo trabalho 😘😍👏👏👏
buenisimo
How to remove this balloon. I made 10 vases. But burst and broken. Not catch very tightly please good solution. We Sri Lanka
I remove the balloon very carefully using a sharp blade once the plaster has set and cooled. This is not an easy process. I have better luck in cooler weather. When the air and water are too warm the plaster tends to set up too quickly and then breaks. Good Luck!
@@ElyseGraham our country very hot environment. We not have cooling places our house. Not use air condition
Lindo trabalho,,gostaria de saber que tipo de gesso ou marca usar? Tentei gesso rápido marca juntalider não deu certo!😥
buenisimo
O meus vasos deram tudo errado fiquei tao triste ,bexigas estourando cobertura de gesso trincando será que e porque coloquei no sol?
Esse processo exige muita prática. Você deve experimentar a proporção de gesso para o tamanho do balão. Comece pequeno. Não há necessidade de colocar o gesso no sol, ele irá definir por conta própria. Você não quer que fique muito quente. Boa sorte!
tres beau travail ? svp quel est le liquide colore que vous avez fais dans le pot??🌻🌼
Inspiring...👌
Entiendo que fabrica esas bolas con yeso, muy lindo te felicito. Trataré de hacer algo así. Gracias.
,
si y creo que dentro lleva resina epoxi
j'aime ta fassent de travaille ,j'ai commence ce projet aussi mais c'est facile.
Quelle sont les produits que tu utilise. Merci Les quantités?
J'utilise du plâtre pour couler les ballons puis de la résine à l'intérieur pour les renforcer. Les quantités dépendent de la taille du ballon que vous utilisez. Vous devrez expérimenter! Bonne chance.
How much is gypsyn?and water in this size of the ballon? Please
Hi Elyse, I run workshops for young carers (children) in the UK would you be able or willing to share what balloons you use? I have tried several types in the past but never found any that appear like the ones you are using. Any advice would be welcome.
Thanks in advance for your help. Russell
Hi Russell--I use qualatex balloons. The ones in this video are 36" diameter, but are underinflated so the latex is thicker. Good luck and hope this helps :)
@@ElyseGraham Thanks Elyse, we have used Crystal R plaster for other projects. We are hoping to turn these into large candles with some holes to see the coloured wax through. I will keep you posted. The balloons to date have been an issue but I’ll check them out. Your work is amazing by the way. Especially love your use of resin.
@@russturner8980 Sounds great! and thank you for the kind words--best of luck to you!
Me gustó la técnica pero no sé inglés podrían poner subtítulos por favor me gustaría hacerlos pero no entiendo
lo siento
Thanks.