This is a method in converting SURFACES to SOLID 3D. type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
10:21 How do you display the selection tool that shows line, 3d solid etc... And how do you get a solid view of objects ? I mean the top lid created never go as a 3d solid. 06:47 you get the full object selected. I can't achieve that.
For the elliptical DIsh Head, make sure that all all segments are joined before revolving it. You can use join command directly or use Pedit ->click one segment --> select yes to polyline-->click join --> click all the segments.
This video explains the modeling of 3D solid Vertical Pressure vessel using AutoCAD 3D. The tutorial includes the creation of nozzles, flanges, and pipe nipples. For the dimension, pls click this link autocadnetwork.blogspot.com/2019/08/blog-post_17.html
@@olatejutemitayo2849 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
@@AC3DCad I have made them into join, if you noticed that revolve drawing to 360 degree. Thus my drawing will be at 6:36 but not same as 6:40 since the revolve line looked simpler
@@AC3DCad I have that same dilema too. I joined the object then when I revolve, it comes out like 6:36 with the lines crossing outside of the ellipse but not like at 6:41
@@farahanis7685 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
@@chiefcleve1834 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
it would take longer compared to using Cadworx, Autoplant or Autocad plant. To make it easier, create blocks for your pieces of equipment and fittings ahead of time.
Are you using Mechanical Autocad 2018 or just Autocad 2018? I have un-necessary line in 2:1 SE head shown in knuckle at layout space? Do you have any idea how to remove un-necessary line?
This is a method in converting SURFACES to SOLID 3D.
type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
I might do a video on how to convert surface to solid soon
I am learning a lot in AutoCAD 3D. Thanks for your great topics!
Great to hear!
Excellent Tutorial. Thank you!
Thanks for watching and subscribing
i am following the videos on this channel, great explanation and smooth work, thank you very much for helping me learn Autocad faster.
thanks for subscribing
10:21 How do you display the selection tool that shows line, 3d solid etc...
And how do you get a solid view of objects ? I mean the top lid created never go as a 3d solid. 06:47 you get the full object selected. I can't achieve that.
click the "selection cycling " at the status bar located at the bottom of the screen to turn the setting on.
For the elliptical DIsh Head, make sure that all all segments are joined before revolving it. You can use join command directly or use Pedit ->click one segment --> select yes to polyline-->click join --> click all the segments.
This video explains the modeling of 3D solid Vertical Pressure vessel using AutoCAD 3D. The tutorial includes the creation of nozzles, flanges, and pipe nipples. For the dimension, pls click this link autocadnetwork.blogspot.com/2019/08/blog-post_17.html
at 6:37, how did you remove the gridlines from the crown ( there was a bit of skip) and i can seem to do it
@@olatejutemitayo2849 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
I recently discovered your channel and subscribed! You delivered excellent material and presentation! Thank you! Keep going!
Thanks for subscribing
great explanation and give me more helping for make drawing at autocad
Thanks for watching
u r just awesome
Thanks for watching
Helpful for me
Thank you
thanks for watching
Hi, this is really helpful and feel delighted for your sharing. At 6:36 when you revolve the polyline join, how to convert it to 6:40? Thank you.
join first the broken segments by typing join command to make them into one object, then type revolve , enter 360 degrees
@@AC3DCad I have made them into join, if you noticed that revolve drawing to 360 degree. Thus my drawing will be at 6:36 but not same as 6:40 since the revolve line looked simpler
@@AC3DCad I have that same dilema too. I joined the object then when I revolve, it comes out like 6:36 with the lines crossing outside of the ellipse but not like at 6:41
@@farahanis7685 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
@@chiefcleve1834 type PR to check the property of the object, click the dish head, and it would display surfaces or solid. In your case it turned out to be surfaces( which happened when I first did it), meaning the objects were not completely joined. Examine and rejoin before using REVOLVE command. Another option is to use SCULPT command, you can either type sculpt or go to the ribbon, and select the SURFACE TAB and inside the edit panel, select SCULPT command, then window or select the whole head. Now, it would convert the surfaces to one solid object. To check, double click the object, and if you check the property, it will show that it is now solid. This is a method of converting surfaces into 3d solid. I might make a video of this. Pls click the bell button of on youtube , so you can get notified when a new video comes. Thanks for subscribing.
Where i can get the sample pict. For my practice?. Thanks
autocadnetwork.blogspot.com/2019/08/blog-post_17.html
thanks for watching and subscribing
Could you make example how to make repad on shell nozzle?
Good idea. I'll try that.
th-cam.com/video/P2A4Q06lGws/w-d-xo.html
Cood job, can you design a large oil tank by autocad 3d? I need it in my Project but I don't know how to design it
Good day do you have a drawing of this one? thanks in advance and Do you have a tutorial of horzontal pressure vessel?
I could not find my original drawing to produce a PDF file. I'll check again
I have done a horizontal vessel in Cadworx. I'll do one in autocad for you soon
here's the link drive.google.com/file/d/1C-unC1KUj-Q-qG4oP84dCTsacmq7mJZ_/view?usp=sharing
Madam can we make equipment & piping layout in 3D autocad
it would take longer compared to using Cadworx, Autoplant or Autocad plant. To make it easier, create blocks for your pieces of equipment and fittings ahead of time.
Thank you very much ...
thanks for watching
What's the elbow radius?
I made a mistake, for NPS of 3", it is not 120 mm from the center to end but 114.3 mm and same with the radius.
@@AC3DCad thanks mam
@@shanmugarajan3857 u r welcome
Thank you very much for this kind of video
It's my pleasure
Are you using Mechanical Autocad 2018 or just Autocad 2018? I have un-necessary line in 2:1 SE head shown in knuckle at layout space? Do you have any idea how to remove un-necessary line?
just plain autocad. Wait a bit I'll check out what you mean.
Good day Madam.Do you have a pdf file of this drawing thanks in advance
Yes I have, drive.google.com/file/d/1C-unC1KUj-Q-qG4oP84dCTsacmq7mJZ_/view?usp=sharing
But it is solid not hollow . Please let me know how to define thk.
You can apply shell for thickness, I might make another one.
mam can we make animation video in autocad like soloidworks
you can animate in autocad but I think it is very limited
hello very good explained.
You will have the plan in dwg, you could provide it to me, I would greatly appreciate it
Thanks for Your lesson
my pleasure
sister can you give me pdf
i'll take a look. I hope I still have the drawing. Maybe tomorrow.
drive.google.com/file/d/1C-unC1KUj-Q-qG4oP84dCTsacmq7mJZ_/view?usp=sharing
.