How generous you are to share your techniques, bro across time. You just blew the frame off so many locked doors in my mansion. Grateful eternally, most learning I have done in 10 mins in a long time.
People are wanting to buy this from him, which I don't blame you, I want one too. But he would not be able to sell them for an affordable price. He would not even be making a very high profit if he sold this for $500. The editing makes it look like it didn't take long to make, but in reality he must have spent many hours making this amazing tool. Hand making and hand fitting things like this takes a long time. I am curious to know how long it did take to make it.
@@BSIinventor101u say u needed six days. U mean working days, right? So 48 hours! Never! Even if i count like two hours for sawing out the legs, one hour for the two wooden disc's and so on i come only on a maximum of 16 hours. And no one need two hours to saw out two legs of this Format. I don't know how u want get of 48 hours but this amount of time isn't usual. Six days... nice joke!
Well thats clearly a given. Prototypes are always expensive due to the research and trial and error that goes into them. Does that mean that should make the part or tool prohibitively expensive? No, that just means they need to work on the cost of making the part, the ease and simplicity of constructing it. Make jigs, tooling, etc.
In some instances the tool can be used as a thickness guage. But you would have to always have measure @ a fixed point on the tool. It looks like you put some finish on the copper hinge but not the protractor. I'd cover both. I would radius all corners, some more than others. Very good looking & well made tool. T.Y.
@@TheFixer1965 You can use a divider like this to walk around a circle and, well, divide it into as many segments as you want. Then you draw lines from the center to each of those points.
As far as craftmanship, its good. But i cannot understand how it can be used for other jobs. A simple divider/ protractor does the same job. Save the hard work put in to make this tool, using soo many other tools!
Nice craftsmanship. But let me tell , for measuring od of cylinder shapes, if the jaws are not parallel, the more they get open the greater the error will be. But to measure inner diameter it can work some how.
@@BSIinventor101i dont understand. you have an ability to create but feel it necassary to mislead people by showing a planer bit then showing the results of a hole saw. most people can reproduce but dont have the ability to create like you do. so it makes no sense why you would do that when people wont be able to reproduce your ability to create. that is a gift that no one can take from you so it makes no sense why you would try to mislead people, you are obviously capable and creative something that most will never have . I see no reason for you to mislead
I would buy it from you with my eyes closed from the Canary Islands, Spain 🇮🇨🇪🇸🔨
This comment made my day, I'm so glad you liked it, but I don't have any products to sell.
@@BSIinventor101 I want one please. It's very cool 🔨🇮🇨🇪🇸👍
How generous you are to share your techniques, bro across time. You just blew the frame off so many locked doors in my mansion. Grateful eternally, most learning I have done in 10 mins in a long time.
thanks for watching and your positive comment
Just incredible. And so pleasing to watch!
thanks so much for watching and your positive comment
Cool My friend... Cool.😊😊😊
Thanks for the visit
People are wanting to buy this from him, which I don't blame you, I want one too. But he would not be able to sell them for an affordable price. He would not even be making a very high profit if he sold this for $500. The editing makes it look like it didn't take long to make, but in reality he must have spent many hours making this amazing tool. Hand making and hand fitting things like this takes a long time. I am curious to know how long it did take to make it.
Thank you for your positive comment, it is very happy to hear these sentences, yes, you are right, it took almost six days
Such things are made for personal use. To ease his work.
@@BSIinventor101u say u needed six days. U mean working days, right? So 48 hours! Never! Even if i count like two hours for sawing out the legs, one hour for the two wooden disc's and so on i come only on a maximum of 16 hours. And no one need two hours to saw out two legs of this Format. I don't know how u want get of 48 hours but this amount of time isn't usual. Six days... nice joke!
Well thats clearly a given. Prototypes are always expensive due to the research and trial and error that goes into them.
Does that mean that should make the part or tool prohibitively expensive? No, that just means they need to work on the cost of making the part, the ease and simplicity of constructing it. Make jigs, tooling, etc.
A tight spring can also be used to replace the inner nut . That way adjustment will be easy..❤
Great point!
In some instances the tool can be used as a thickness guage. But you would have to always have measure @ a fixed point on the tool. It looks like you put some finish on the copper hinge but not the protractor. I'd cover both. I would radius all corners, some more than others. Very good looking & well made tool. T.Y.
Great point! thanks so much
I like to think that this is how precise tools were made 100s of years ago.
The ancients were very creative
It is.
Yeah, I wonder how they marked the divisions without a plastic protractor, though.
@@TheFixer1965 You can use a divider like this to walk around a circle and, well, divide it into as many segments as you want. Then you draw lines from the center to each of those points.
Very nice precision work. From Liverpool UK
thanks so much
So inspiring. I am in the process of making my own personal tools. Love the precision.
thanks so much
@@BSIinventor101 had to subscribe immediately on vacation binge watching your videos
@@latenightwoodworker3283 it's my pleasure, have a nice vacation and hope you enjoy my channel
Excellent work!👍👍👍
Thank you very much!
با تشکر از شما برای به اشتراک گذاری پروژه خود. از شما برای ساخت یک ویدیوی عالی در مورد آن نیز متشکرم. 😊
خیلی ممنونم از لطف شما
Mesmerizing, amazing video. Hi-class craftsmanship.
thanks so much
As far as craftmanship, its good. But i cannot understand how it can be used for other jobs. A simple divider/ protractor does the same job. Save the hard work put in to make this tool, using soo many other tools!
Lo felicito, su herramienta es una obra de arte, merece una urna, gracias por mostrarla
thanks so much for your positive comment
perfectly done
thanks so much
Very nice.Thanx for sharing.
So nice of you
Beautiful tool!
thanks so much
Using all the glue accelerator seems unnecessary…
I’ve always heard you get far stronger bonds if you let things cure gradually.
thanks for sharing your thoughts
Very nice work ❤❤❤❤❤❤❤❤😊😊😊
Thank you so much
Nice craftsmanship. But let me tell , for measuring od of cylinder shapes, if the jaws are not parallel, the more they get open the greater the error will be. But to measure inner diameter it can work some how.
خیلی ممنونم که نظرتان را به اشتراک گذاشتید
Agreed😊
Beautiful! The only change I would make is to round over the edges.
thanks so much, that change will be great
Отличная работа . Показывает , не боги горшки обжигают .
thanks so much
I like it!
Thank you, that means a lot to me.
Man did a clothespin :)
thanks for watching
Bravo bravo bravo
thanks so much
أنا مشترك جديد✌️🇮🇶✌️
hello, welcome to my channel
@@BSIinventor101 thank you
Браво, Мастер! Но проще купить готовый!
thanks so much
Good job Behnam 👌👌👌
thanks for your support 👍👍
Is it Mr. Mitutoyo?!? Or Starrett?!? Or- OH WAIT!! I GET IT!!
B S I
¡¡ Brown and Sharpe Inventions !!
thanks for watching
I thougt we need a scale in millimeters, not degrees.
thanks for sharing your thoughts
Agreed
Just found your channel…excellent!
thanks so much
как хобби - замечательно, как инструмент - спорно, но работа отличная
thanks so much
для этого очень давно сделан разметочный штангель циркуль, точность деревяшки зависит от влажности воздуха
thanks for sharing your thoughts
Had this whole been made from brass or iron, it would have been long lastinf
❤❤✌✌🧿🧿🦋🦋
thanks so much
Excelentes trabajos amigo pdf sería bueno
thanks so much, im learning solid works and will share when im done 👍
Tool to do WHAT ???
multi purpose tool
Exactly.
To help you scratch your head merely by watching it get used. Of course, you could scratch better if you actually had it in your hand 😜
acting like the hole saw is a big secret
thanks for sharing your thoughts
@@BSIinventor101i dont understand. you have an ability to create but feel it necassary to mislead people by showing a planer bit then showing the results of a hole saw. most people can reproduce but dont have the ability to create like you do. so it makes no sense why you would do that when people wont be able to reproduce your ability to create. that is a gift that no one can take from you so it makes no sense why you would try to mislead people, you are obviously capable and creative something that most will never have . I see no reason for you to mislead
Nicejob
thank you so much
Подскажите, чем вы брызгаете на клей ?
super glue accelerator
Астролябию сделай .
thanks for watching
SARVAMAGALAM
Ye to kloth klip se bhi bana sakta tha
thanks for sharing your thoughts
полезный прибор
thanks so much
How is it 5in1?
please watch till the end
Do you take orders?
i will create a shopping on youtube and start to get orders, i will notify you soon
@@BSIinventor101 I'll be watching
😁👍
👍
What would you call that tool
this is a type of wing divider
❤❤❤🧿🧿💝💝💝
👍👍👍
❤❤👏👏💚💚
thanks so much
Fabulous, I'm going to round up some components and get started .
thanks so much, have a great DIY journey