Yep, limited edition. First car that had the 2.3 MZR DISI Turbo before it went to the Speed 3 and CX-7. I'm loving my Speed 3, but I'm only at a fully bolted, mild upgraded turbo 390/385 @ the wheels running an E25 mix and spraying some methanol for extra cooling, safety, and valve cleaning (because we're direct-injected).
Numinous you comment on everything mazdaspeed 3/6 relevant haha I see you comment everywhere. You have a Instagram or some type of build log that you keep up to date with??
Those are afterfires, not backfires. Big difference. Backfires can be extremely dangerous; afterfires happen (and are much more audible) when you have a spark cut (due to hitting the redline, for instance), then spark resumes with extra fuel in the system that ignites all at once, going out the exhaust and making that sound. Other things can cause afterfires, too.
How have I lived this long without knowing these are the sleeper sleeper. Not even a sleeper. They look like what your mom drives but beats what all the little boys get to feel big.
I'll bet that thing is a blast to drive. All wheel drive with 620hp. Can't compete with the all wheel drive 1200hp Tesla but still a blast. Major sleeper.
I have a 2011 ford fusion 6mt that the mazda speed6 is based off of. The 6mt in my car is actually the same manual that comes in the speed6. Also the fusion awd is the same awd in the speed 6. I want to do a drivetrain swap with the awd and add the 2.3 turbo set up in ththe speed 6 into my 2.5 fusion. I'm going to build the fusion the Ford should've built. I'm calling it project Confusion".
Nope. The motor build alone on the MZR DISI Turbo engine (which is shared with the Mazdaspeed 3 and CX-7) can be built to handle 800+whp for well under $10k. Many 500-600whp engines on this platform can easily be had for $5k. I have a Speed 3 and have researched this extensively. There's even an extremely reputable/successful shop local to me that'll do the whole build, making you a 700whp-capable engine, for $5k, including pulling the motor and re-installing it. Now getting all the supporting mods, the turbo, etc., can put your build into the $10k+ price range., for sure.
Thought at 0:18 that the vipers tire exploded but it seems the Mazda backfired and scared the viper driver. Gotta stay focused and committed in situations like that. But damn was that loud.
Realistically, how much torque can this thing handle before the transfer case is smoked? I've broken CV joints front AND rear with only minor upgrades.
Arthur Serino torque is at 480. Damaging the transfer case or breaking an axle is pretty unlikely from a roll. That can happen at any power level when it comes to hard launches. I've had this car for over 10 years now and it's still on the oem front axles. Only axle to break was the driver side rear and it's been upgraded to a dss axle.
@amggilly305 I love your car, I was inspired to build mine 3 years ago and I myself are at that power level and about 520 torque. I'm also on stock axles and I managed to run 11.1 at 127 on 18s with street tires. I would love to do an event like this I think it would be a blast.
I am planing on buying a MS6, i currently have a 07 mazda 6. I was planning on putting mods on my mazda however i feel it would be appropriate to wait till i purchase the ms6. Any suggestions on what i should do. My budget id say would be like 5k
I'd love to get mine up to these specs, if I could keep it out of the shop longer than a mo. This is a beast, and makes me proud to actually be a Mazda 6 owner. Recent owner of 97 and 02 mustang's. My Mazda is definitely quicker than both of my stangs were. I definitely want to build a sleeper 6.
Long time no speak man! I remember when this was running 12s around 112 haha, she's come a long way. Car is coming along well sir, good to see Nishan still doing work :-)
Driver of the viper thought he was getting shot at and swerved out the way lmao
instantly went to the comments when i saw that haha
@@thinmint6778 hahaha mee tooo. Almost got Snakebit
Hahaaa!! Mazdaspeeds are notorious for a lot of backfiring!! ✌🏼😁
🤣🤣🤣🤣🤣😭😭
Lol😂
Nice save from the Viper
dang loving the Speed6. Such a beast sleeper, nobody even knows what these cars are.
why does that matter? never really figured that out
It means you care more about performance than pruning your feathers like a douchebag peacock
It's not a status symbol.
Yep, limited edition. First car that had the 2.3 MZR DISI Turbo before it went to the Speed 3 and CX-7. I'm loving my Speed 3, but I'm only at a fully bolted, mild upgraded turbo 390/385 @ the wheels running an E25 mix and spraying some methanol for extra cooling, safety, and valve cleaning (because we're direct-injected).
Numinous you comment on everything mazdaspeed 3/6 relevant haha I see you comment everywhere.
You have a Instagram or some type of build log that you keep up to date with??
Man those backfires in between shifts are like music to the ears!
Those are afterfires, not backfires. Big difference. Backfires can be extremely dangerous; afterfires happen (and are much more audible) when you have a spark cut (due to hitting the redline, for instance), then spark resumes with extra fuel in the system that ignites all at once, going out the exhaust and making that sound. Other things can cause afterfires, too.
@@numinous4789 Always that one guy that wants to one up everyone
@Leon Jones hahaha facts
Lmao
Props to the builder of this wonderful machine..I always told myself this is the wild card in the game of import tuning..job well done..
The viper owner had to spend the rest of his tuning money getting the poop out of the drivers seat.
damn! much much respect to the build and owner of this awesome car. good to see a speed6
Satan's MS6. What an awesome build... this thing is mean as fuck.
lol ms6 shot the viper out of control best part of the vid
How have I lived this long without knowing these are the sleeper sleeper. Not even a sleeper. They look like what your mom drives but beats what all the little boys get to feel big.
it'll be at the next event for round 2!
These cars are so underrated, it was able to stay caught up to the Mclaren
Yoooo that mazdaspeed beating the gtr!
I'll bet that thing is a blast to drive. All wheel drive with 620hp. Can't compete with the all wheel drive 1200hp Tesla but still a blast. Major sleeper.
awesome video man! thanks for recording all that. got any footage of the red speed 3 I was with?
Great build! I'd like to know more about your mod list.
check out my page
How do we find your page? I've searched your name on TH-cam and Facebook.. Not finding anything...
click on my name to watch my TH-cam videos. that's what I was referring to
amggilly305
Mazdaspeed was a legend
I have a 2011 ford fusion 6mt that the mazda speed6 is based off of. The 6mt in my car is actually the same manual that comes in the speed6. Also the fusion awd is the same awd in the speed 6. I want to do a drivetrain swap with the awd and add the 2.3 turbo set up in ththe speed 6 into my 2.5 fusion. I'm going to build the fusion the Ford should've built. I'm calling it project Confusion".
Dude that's sick how's the build coming along?
VERY UNDERRATED CAR. nice runs.
Great races, sounded sick AF. And cost a fraction of all those cars. Mazda power.....
i bet you its pretty damn close to most of those cars.. 10s of thousands into the motor most likely, if it was done right
David Huffman you can pick up a fully assembled block good for 600hp for 7000$ American if you care I could find the website
David Huffman here in Canada Aswell you can find these relatively cheap now 3-9k Canadian with 100-300,000kmv
David Huffman here in Canada Aswell you can find these relatively cheap now 3-9k Canadian with 100-300,000km
Nope. The motor build alone on the MZR DISI Turbo engine (which is shared with the Mazdaspeed 3 and CX-7) can be built to handle 800+whp for well under $10k. Many 500-600whp engines on this platform can easily be had for $5k. I have a Speed 3 and have researched this extensively. There's even an extremely reputable/successful shop local to me that'll do the whole build, making you a 700whp-capable engine, for $5k, including pulling the motor and re-installing it.
Now getting all the supporting mods, the turbo, etc., can put your build into the $10k+ price range., for sure.
Beautiful car! Has it been converted to single exit exhaust? Normally they are twin exit from factory.
I think that Mazda and my GT3 RS would be a good match. huge thumbs up for the builder and the driver.
Would definitely like to see that matchup
Awesome video thanks!!
Sick!! How u get the speed 6 to get so much horsepower?? Must be an awesome sleeper😁
Thought at 0:18 that the vipers tire exploded but it seems the Mazda backfired and scared the viper driver. Gotta stay focused and committed in situations like that. But damn was that loud.
Badass MS6 man! What are doing for AUX fueling? SP3's setup or? I need AUX bad for my EFR 7163'd MS6
sp63 pi kit with a jmf manifold
Nice! Stock trans gears or Euro spec?
stock gearing. you need a lot of power to benefit from longer gearing. being able to rev to 7700 helps
is this at Pocono Raceway in PA? Also, where in NJ is this MS6 from?!? Pure savage!!!!
yes pocono!
1:33 shots fired!!!
dam! what u got under that hood of that speed 6??
2.3 turbo lololol
Crazy build... Nice work...
Really wish I had the speed 6, just have 6 s and can’t wait to get it modded out
Could you give me some advice on how to go from rear to front wheel drive?
I wanna see the speeds 6's and 3' taking on corners
damn he was moving in that thing. I had heard it during the day, but never got to see it run
Great car. Awesome video. 👍🏾
1:31 that backfire is literally a gunshot lmao
Sort that suspension out !
Kenny Jonczyk I agree
Looks like it’s on stock so it’s not set up for that kind of power
what work does it have, looking to tune mine
where is this car now?
amazing Mazda 6 MPS
Realistically, how much torque can this thing handle before the transfer case is smoked? I've broken CV joints front AND rear with only minor upgrades.
Arthur Serino torque is at 480. Damaging the transfer case or breaking an axle is pretty unlikely from a roll. That can happen at any power level when it comes to hard launches. I've had this car for over 10 years now and it's still on the oem front axles. Only axle to break was the driver side rear and it's been upgraded to a dss axle.
@amggilly305 I love your car, I was inspired to build mine 3 years ago and I myself are at that power level and about 520 torque. I'm also on stock axles and I managed to run 11.1 at 127 on 18s with street tires. I would love to do an event like this I think it would be a blast.
specs? just got a blown ms6 and got some big plans
Which engine is this ??
Mazda 6 super technology, awesome!!!
MS6 only produced for 2 years! amazing product from Mazda
I am planing on buying a MS6, i currently have a 07 mazda 6. I was planning on putting mods on my mazda however i feel it would be appropriate to wait till i purchase the ms6. Any suggestions on what i should do. My budget id say would be like 5k
Eliezer Cartagena I have a ms6 for sale 69k miles, let me know if your interested
And to think, even with the money it took to make 620hp, its still far far less than most of these cara cost new and stock
True and we should ask them the question why are even so expensive
sounds like a airplane and cannon
It smoked a gtr???
Need some better suspension though jesus
I'd love to get mine up to these specs, if I could keep it out of the shop longer than a mo.
This is a beast, and makes me proud to actually be a Mazda 6 owner. Recent owner of 97 and 02 mustang's. My Mazda is definitely quicker than both of my stangs were. I definitely want to build a sleeper 6.
Me too
were you able to?
Loses to a $150+k car… and still wins…😂😂😂😂❤😂😂
A Viper that wants to kill its driver...
Ha! How unexpected..... NOT. xD
how did you get 600hp?
I wanna modify my Mazda 3 when I get it back 😔
people realize that ms6 only has a 2.3 litre straight four, put things into a better perspective
3.0
@@johnwick-ck8sh not really, 2.3 Turbo awd!
That’s the base vehicle though. This is the speed, but still amazing since the speed is a third of the 600 hp this speed is pulling
Congrats to that owner of the white viper for keeping the car from spinning💯
I want my speed6 to explode when i shift gears like yours does :(
John Madden buy a wot box
impressive
Setup on this?
Info is in the video, built motor / precision 6062 / e85 mix, tuned by nishan
What engine in it???
built motor from speed performance
Setup ?
Info is in the video
Is this thing just rear wheel drive, if so how?
Harry Falla awd
0:44
what a savage sedan
I'll take it..
mazda v gtr mazda wins embarrassing
Jesus!
Ya me gustaría tener es Max
Mazda
Best car
I love the Mazda 6 cuz it almost beat a maclaren
Yep I love the mazdaspeed and Mazda Respect all the mazdas
insane sleeper
((/\)) Andale Roadster Duster Slanted MazdaSpeed6 ((\/))
I miss my speed6. The good old days.
Bruh, I miss my 6, wasnt even a speed but I still loved it.
Raizel Ruvalcaba big difference ms6 are rare
Lmao vipers r true death machines smh
620 WHP and beaten by a stock Mclaren?
over 500 whp in a 31-3200 pound.....research before talking out your ass.
I don't think it is 600 at the wheels!?
Why did I constantly beat one with 600whp in a 3700LB Falcon? 10.3 @ 133, Best the macca would do was 10.7@130
can ran fine against the McClaren. I had a late start and he jumped out instantly. I do make 620 to the wheels in a heavier, less aerodynamic car
Long time no speak man! I remember when this was running 12s around 112 haha, she's come a long way. Car is coming along well sir, good to see Nishan still doing work :-)
Lmfao i was w Nishan last night😂😂😂
من قروب يزيد😂😂😂✌✌
This video is just ❤️❤️❤️
Sounds like a honda lol
zr1 the best !!!
boii I had the first like
الا جاء من سناب يزيد لايك
I'll take the F10 and the IS300 at the end
More videos coming, stay tuned!
مازدت يزيد ارجل منها
so as it leaves early on everything and gets run down... this is very unimpressive
your comment is very unimpressive.
You're a gump, that drives a Nascar edition F150. Shut your maif.
does that have a honda motor? hahaha
1st
Boring. Vs an Integra and the show vids.