How to Diagnose a Bad CV Axle
ฝัง
- เผยแพร่เมื่อ 26 ก.ย. 2024
- Shop for New Auto Parts at 1AAuto.com 1aau.to/c/84/X/...
In the video, 1A Auto shows how to diagnose or check to see if you need to replace your axle or CV joints
🔧 List of tools used:
• No Tools Needed
Subscribe: / @1aauto
Check out our playlist:
Driveway Diagnostics!: • Driveway Diagnostics!
Tips & Tricks: • Tips & Tricks
For More Info visit us at 1aau.to/h/buP/
⚠ DISCLAIMER:
While 1A Auto strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. 1A Auto is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ *Watch the Video*
√ *Buy The Part at 1A Auto* 1aau.to/m/Visit-1AAuto
√ *Do it Yourself*
√ *Save Money*
Can you make a video on how to attach/connect the old splines to the new axel?
+Unchosen _One We're always cycling through common cars. We'll add this repair to our list! 1aau.to/m/Shop-1AAuto-c
@@1AAuto awesome I'll be watching for it. if you could demonstrate on a 2005 acura tl that would be gnarly😄👍🏻
How can we identify a bent cv axle
I've seen so many videos tell me there will be a 'clicking' sound. That means nothing to me. What would really make this video stellar is to record the clicking sound so we can hear it. Auditory examples teach in moments what language can never convey. What you call 'click' I might call 'thump'.
Vibrations at highway speeds could also be from bad CV axels
Thanks for the comment when I start going above 60mph it vibrates pretty good 👍
That's what I'm getting. Got lots of up and down play too after looking around. Starting to think it's the axles.
@@ChillingwithMalc did you ever replace them
Right... only if the inner joints go bad do you get the clicking noise.. they don't talk about the outer joints or anything else.
But only under load/acceleration once you let the gas pedal off then vibrating stops
1A auto has saved me 4k so far with the best do it yourself videos on the web. Thank you so much. 04 Laramie Ram 1500
Mine is a knocking sound when turning. Perfect, thank you!!
Thank you sir, there’s a loud clunking on my drivers side only when I turn and the guys at big o tires said my sway bar links failed even tho there not even a week old. I was either guessing ball joints or cvs, my boots are torn through so this helps me confirm.
Mine snapped in half after a year of lack of knowledge how to fix it and a garage that promised free labour because they misdiagnosed it and were willing to repair axle free of labour just pay for part.
After it snapped I looked up on TH-cam how to fix it and it's as simple as a 20 minute job. Did and back on the road.
I've been working on a project car and learned a lot. but I was always being told it's a very difficult job by this garage and free sounded better than doing it myself.
I watched an 1Aauto video and they showed exactly how to do it. Good quality videos I'm glad they show how to repair a vast amount of cars, mine was a 2005 sunfire.
+Justice Tysick Thanks for the feedback!
What happen with vibration only when accelerate, but no noise at turning the wheel?
Front driver side vibrates when accelerating. No noise at all. No leaking or damaged boot. No play when pulling on it. No indication the cv on my toyota tacoma is bad. So im startong to think that mabe its the tire but that would mean the car should always shake not just when accelerating, but my car only vibrates when accelerating. So idk how ot can be my cv axel when everything you said was a sign my showes none of those signs. It viberates only accelerating no noise at all. No leaking or cut boot. Doesnt make sence. Cant figure it out but maybe mine is just starting to go out amd isnt worn enough to make noises or give alot of play when pulling on it
Excellent diagnostic assessment. I wish I had y'all where I live at.
I learned the hard way that if one cv axle is failing then its a safe bet that the other one is due for replacement as well.
Thank you! Short, informative and straightforward!
I have some TRQ cv axles for my '98 Town and Country, I'm going to install them as soon as the axle seals arrive. I just put on some of the TRQ rear wheel bearings and they seem to be of great quality. I appreciate your videos.
Correction: the axles are from Detroit Axle, but I have a set of four TRQ struts for a 2003 Lincoln LS that I"m going to install tomorrow! :)
I had bad half shaft no indications at all in turning or anything until you got up to speed limit and then all sudden it was like right brake grabbed and tried pulling it of the road very dangerous ! But never see mentions of that indicator on line anywhere
Magdalen Carpentier my f150 is doing that exact same thing I have cv for the 4x4 which always spin locked in or not. When the trucks cold I can drive fine about 3 miles at 60 but then u hear em grinding and trying to jerk the wheel outta your hands. I'm glad I wasn't alone!
I was hoping to get info on CV axel shaft side play... I heard no mention of it.
CV axle also can cause front end vibration. There is specific test on that.
Yea what's the test I have vibration at highway speeds
Just ordered some new cv axles for my 2007 Honda Pilot from you guys. Price was good for the set. I’m gonna do the work myself since I have all the tools for the job. Seems easy enough so we’ll see.
How did it go? I'm preparing to do the axles on my RAV4, and I have no idea how much time to budget myself.
@@JeremyNyberg I was hoping he responded to your question. Did u order axles from them? If so how r they holding up? I hear mixed reviews on aftermarket axles.
I have 2014 equinox fwd and I only hear the ticking sound when accelerating lightly or normally in a turn but not a full turn and when I’m stopped and I turn my wheel back and forth I hear an occasional metallic tick
What if you are getting a little feed back with a little pop but no clicking?
My car at highway speed rumbles like it is running on rough pavement. However, whenever I make full turns I never hear clicking noises.
Sir my car has a bit of play on the CVT axle. The axle can be push in and outside by approx. 1cm or less and also makes knock sound while moving it. Is this a bad CVT or normal?
Surprisingly, no leaks or damage in CVT boots and no clicking noise when turning or riding the car.
LOVED THIS ONE MINUTE VID THANK YOU!!!!!!!!!!!!
I have a very bad grinding noise on the front end of my 200t Ford expedition an my CV axel has play in it should replace it
john clark no worries just remove it no need to replace
Check your wheel bearing/hub assembly as well. Might be a loose axle nut. The grinding could be from the bearing hub.
When i jack up my car my driver cv axle spins as if it was driving. The passenger is not. It does this even in park. What does it mean
Hi,
Thank you for the informative video!
Have you ever seen excessive movement with the inner CV joint (both up/down and left/right), I think I have bad differential bearings - but not entirely sure as I rebuilt the gearbox 15 months ago
Hi, I don't hear clicking but more like a knobby tire rubbing plastic. Would that be the same as the clicking?
I work at an auto shop and this video helped more then my boss 😒
I'm procrastinating by watching this video because after both boots have been torn for almost a year I'm getting a pretty solid vibration at highway speeds in the steering wheel. Hoping it will wait another 90 days and warmer weather since I alternate cars but who knows.... Don't hear the clicking yet, remember that noise from my 1981 Chevy Citation back in the early 90's, my first FWD vehicle. Eventually it left me stranded and needed to tow it home behind my buddies truck.
Can you make a video on how to connect the old splines to new axels?
I have a problem... I have an 06 H3 Hummer.. I had a clunking noise while turning the steering wheel while sitting .. I didnt know exactly where it was coming from.. then my seal on the passenger side went out...I think my CV axle is bad... do you agree ? or should I investigate more ?
Good to know, thanks for sharing. - take care
Do the rear cv axle go bad I don’t know where the noise is coming from the front or rear.
I love the dave matthews music to inspire me
Could bad cv axle be causing a popping noise when turning at slow speed in drive and reverse?
Yes
Same issue
So I lose torque when accelerating while turning, could this be a cv axle problem or transmission
Well now I learned I may need to replace one of my CV joints soon, but I probably have some time before it's fully gone
Don't wait, better to be safe than sorry. Imagine ur going full speed on the highway and it gives in, and you lose control
thanks for this! what causes it go bad? just because i've had my car for so long?
+AllPink Thanks for watching! The CV axle will go bad over time, as it is a type of ball joint under the boot. If the boot ever gets torn it can speed up the process because dirt and debris will contaminate the joint, causing it to fail. 1aauto.com
Some good sounds to listen too are knocking sounds, and for me my ball joint was bad and I noticed due to a vibrating steering wheel, and it would jerk to the left side (which is where my ball joint and axel went bad.) Hope this helps you a lil!
I don't hear a clicking but my car jerks BAD when I go over the slightest bump on the road. I just had my knuckle bushings replaced and I thought that would solve the issue. I've been told my upper arm control and my CV axles are going out but I can't tell which is causing the handling problem. I drive a 2001 Lexus gs300 RWD. Could anyone shed light on my frustration/situation.
I’m getting a clunk patterned tick while I softly break, when I press the brake harder it stops clunking, please help !!!!
I was told shaking in your steering wheel is another indicator, is that true?
I have an 02 accord and I think its my CV axle but it's more of a thumping clunking sound . wheel doesn't shake but its pretty loud Inside the car . especially if turning to the left . I feel the knock under my feet too . what could this be ? I was told wheel bearing but i think its the axle
+Mal A Thanks for watching! It could be multiple things. If you are unsure we recommend you have your vehicle looked at by a reputable garage to get accurately diagnosed!
Any update on what it was and how u fixed it think my car is having the same problem ?
very very good video
I have something going on with mine. I don't hear a clicking noise. I hear what sounds like a knobby tire rub. THe CV joint boot has no tears or
cracks in it. I jacked it up and tried to shake wheel etc. no movement but when I grab the shaft it moves in an out a bit.
Thoughts?
Does it only happen when moving? When I turn the wheel without moving, I don't hear anything.
moving
Thanks
Thank you!
I have side to side play that clicks in the driver rear. Seems to come only when driving slow and after I’ve been driving for awhile it gets worse. Could that be a bad CV?
Mine when on the jack stand has a lot of play and I also have some play when putting in drive or reverse no clicking on full turn but its got at least a 1and half inch of play when park on the jack and you can hear like the gear just seems worn should I wait to replace???
+Christopher Mendonca We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
If the boots look like they are starting to crack/tear, should they be replaced? Also what about the rubber parts of the lower control arm. If they show signs of cracks is that bad?
+Edwin Castillo If you have rubber dry rotting then it should be replaced. The control arm bushings will make you feel shaking while you drive and the boots for the axles contain the grease inside and you don't want to hear a popping noise when its just metal to metal contact inside of it.
Should you replace both CV's if only 1 is bad
Had cv-axle replaces now it vibrating at 55 miles on a 2013 honda Accor 2.4 engine what is wrong with my car
I have an 04 Madza 6s and have replaced both cv axles and bearings recently. I have a grind at low speeds coming from the passenger front. I thought maybe a bad replacement axlel but when I get the car up and loosen the cv axle nut the hub wobbles a lot but only if the nut is loosened. Have the new bearings already failed in less than 90 days?
+Half Rot Zombie Thanks for watching! It is certainly possible that the bearing has failed, but unlikely within such a short amount of time. There could be other factors that are contributing to this issue. We recommend that you have a trusted garage take a look at the vehicle to get an accurate diagnosis if you are unable to do so yourself! 1aauto.com
i have the exact same car and im getting both cv axles replaced soon also. How much did you pay for labour and parts?
Did you find it what it was?
Guess what? My cv axel seized with ZERO WARNING And I couldn't even push it out the rd it was so seized. On the end where it goes into the tire there is actually a bearing. That thing was seized so bad I HAD to tow it. So noise doesn't always tell and in my case there was absolutely no warning noises.
+@nikkilovetheyardsale-again2608 Thanks for the feedback!
I have a 2004 chevy blazer and when I stop, I hear a clunk. Especially at really slow speeds and when I attempt to back up as well, whether straight and especially if I turn either way. I had an upper control arm replaced over 5 years ago and it popped like this but not as loud and when I took it in to have an O2 sensor replaced a few years ago, the tech said he fixed the pop that I heard. He said something was loose, but cannot remember what he said it was. My bro and myself jack it up a few inches and put a spud bar under wheel and pulled up on it multiple times to check if we could replicate the clunk, but we couldn't. He pulled out on tire, 12 & 6 oclock and then 9 & 3 oclock to see if bearins and I believe tie rods were bad. Maybe it was ball joints. We could not get it to even pop a little. I have been wandering if it could beth cv axle. Someone td me to jack it up, put on jack stand a ace jack.under cotrol arm and lift a little to take tension off of all components and may be eadier to check everything moe closely. This is freaking me out. It has over 220,000 miles, so I shoukd expect things getting worn out. I just dont have the patence to work on anything, but I will have to learn because used vehicleprices are ridiculous and I know this thing probably isn't worth much, but its all we got besides my other truck which has its own problems. Could the clunk I hear sound like anything with the cv axle? I even thought that torsion bar may be to blame or even a broken motor mount. Sometimes when I put it in park from drive, the engine dies. Iwas told that a broken engine mount could cause this and may even be the source of the clunk.Ty.
When you turn the whee all the way or the right like you did in video,
And cracking noise happens, does that indicate a bad left or right cv axle?
i would like too know too
My CV visually looks fine, but I get the clicking when driving, but heres the thing..... it happens when I am going straight, left or right and it happens randomly and unpredictably, sometimes when I turn it does it and sometimes it don't. I know what a bad CV sounds like and it sounds exactly like a bad CV, but I am not convinced yet cuz it doesn't happen consistently or just when I turn. CAN SOMEONE HELP?!?!?! 2008 Toyota RAV4 V6
+BearXBunny We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
what about for a rear wheel drive car? turning the wheel makes no difference?
I took my car to the mechanic in order to stop it from pulling to the left while cruising down the road. Also, the car would clunk when going up a bump and the steering had excessive play. I was told that it was my cv axels. I’ve been using this same mechanic for years and he’s very good, but I’m not so sure that he diagnosed this one correctly. Could it actually be?
Sounds like a bad strut mount? What was the ultimate outcome
this sounds like a combination of faults, checking steering, brakes, suspension & drive line would be my go to response so yes your mechanic could well be correct. why not trust him you say he's good.
So if there is no clicking there good mine make noise when I go straight only sometimes
+2pacnasgame We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
My front end does a squeaking sound when doing a slow hard left turn (like getting out of the driveway) any ideas? thanks
Squeaking can be a ball joint. Did you get this resolved?
is it true.
that when a front hub bearing is going,
and that the side u hear it,
is opposite that needs to be changed
Not always. The best way to test it is to do a quick 1/4 turn while driving at speed. 60km/40mph. The noise will get Louder more often than not, on the side that needs replacing when you do this.
What about a loud pop while in 4x4 and turning? Sounds like someone hit the underside of my truck with a hammer. I can't find anything online about it. Everyone just says clicking if it's the CV.
I had the same issue on my Sierra. I just ignored it and avoided parking in 4x4.
My guess is its the IWE.
What if you turn your steering bearly 1/4 turn and makes noise but when you make 180 turn doesn't make a sound.pls help
Thanks for the video. Yea mine sound bad. Can you do a video on how to replace cv joints in a 92 Silverado or like truck.
whenever I roll over a Curb or parking block.. something blunt and large like a big rock when the wheel is compressed up from making contact I hear metal on metal noise... I tried to take to the dealer several times and showed them with a test run... then when we came back to the dealer and the mechanic that was going to work on the car tried to repeat the problem they tell me they couldnt do it and they didnt see any issues... so I have had this issue for years. and I went to the dealer 3 times under the warranty and never could get them to fix it.. wondering if you have any ideas... I dont hear any clicking sounds on tight turns.. just then the front right wheel hits a sharp bump.. sounds like metal on metal..maybe the strut is compressing and the wheel stop is hitting the chassis ...I dont know... any sugggestions?
+xpez We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
I have the automatic and optional manual transmission. I'm not sure what that's called but they sell an automatic type and manual type, so which one would I need since I have the combi-transmission? 05 Acura tl
You have a automatic.
Cant have both. Sounds like paddle shifters
I have a question. On my FWD car, the boots are not cracked or ripped, but when I turn left on moderate lock under some throttle, I hear clicking from the left CV joint. Probably is the same on the right too. But now I also have a problem of vibrations on the stearing wheel when driving about 120-140 km/h or so. The tyres are ballanced and good, suspenssion is good too (I had it checked by a mechanic), so it can only be the CV joint. I like driving on the fast side, even though my engine only has 75hp (but I work it hard), so I think that caused the wear of the CV joints, even though my car only has 85.000km on the clock.
My question is can I continue to drive it like this? I don't feel like replacing semi-axels that stil "work". How likely is for the CV joint to break off completelly while driving (I know this can make the suspension parts to break as well, and wheel to get semi-detached, which leads to loss of controll of the car). Will I get warning sings when the CV joint becomes that bad, that the risk of breaking off is much higher?
+Ауто камере Србија / Dash cams Serbia Thank you for checking us out. When there is an issue with a part especially something as integral as a CV axle, we would recommend getting this addressed sooner rather than later. Yes it may still drive for now with minor irritations of vibrating but all it would take is a decent sized pothole or turning too quickly as a high speed to have a CV break and cause much more damage than it would cost to have replaced. Ultimately this is your decision and any safety inspection regulators in your area, but we would recommend getting these switched out for new axles for the longevity of the vehicle.
@@1AAuto Thank you. I will probably have them replaced in the next few months then.
+Ауто камере Србија / Dash cams Serbia Thanks for checking us out! 1AAuto.com
Remember when these cv joints lasted about 60k miles? How long to they last now? I think it was the boots that didn't last and then the joint would go dry and then bad?
What about axle has a noticeable wobble in them
My car starts making a metal high pitched squeak when I turn to the left and I can’t turn it the full turn but it only happens in park or when driving only at a stop, since this has been happening I’ve been hearing power steering noise when I turn my wheel at all, any ideas what this could be ?
Might be a strut bearing?
If the noise sounds on the right/passengerside of the vehicle is it the CV joint on the right that needs replacing?
+Bo Jay Could be. it's hard to say for sure without seeing the vehicle in person. It could be the CV joint or any of the surrounding suspension parts in that area. Check them for play
I recently changed my wheel baring on my 09 chevrolet malibu and when I reinstall everything and go to test drive it, it won't move it will go into gears fine but will not move a inch, what could I have possibly done wrong...
+lunar Phantom We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Yes, of course I love you guys... OK so when I recheck my work, I find somehow the break pad was sticking to the rotor to the point it would not move an inch, so once I take loose the caliper pins screws, it released the pressure and I'm back rolling now... Thanks for your channel.
Right front won't turn it gets stuck can you help
I have a question for you.. do you have to have your windows down to hear the clicking sound? What about clicking when you turn the steering wheel wide and the clicking sounds like it's coming from the steering column?
I want to add a bit more info. Noise occurs turning left or right, no noise in reverse, well I dont make hard turns in reverse so I'm not sure if it's there or not. And what kind of feedback do you feel in the steering wheel
+Alexandra Jarrin Thanks for watching! The clicking sound is best heard with the window down, but you can hear it with the window up as well. 1aauto.com
@@1AAuto if you can't hear it outside at all what could make that noise? No one has ever heard it besides people in the car and the windows are always up. It's not really muffled as though traveling from underneath if I made to explain the sound to.me it.sounds like hard plastic that shouldn't overlap, but is overlaping
Was it the same sound when stated turning the wheel to the left at 1:13?
Please answer cuz I have that exact same sound on my car that comes after I drive the care for a while, and doesn't if the car is still cold.
+Edo Ahmad Thanks for watching! The sound at 1:13 does not indicate the CV axle it bad, it is just the sound the steering makes. 1aauto.com
The reason I put thumbs down you didn't say which axel is bad when you turn left or right.
Concise! Thank you
Will that cause the vehicle to “lockup”?
What if my cv axle on the inner side connected to transmission is leaking oil a little been like that for about a year but never replaced it is it bad what could it be?
+Rene Suarez We are unable to diagnose your vehicle online. Please take it to a reputable mechanic to have it diagnosed. Thanks for the comment!
Hello. I hear a squealing noise when my steering is turned all the way (locked all the way). Do you know what might be causing this?
+Roberto We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1aau.to/m/Shop-1AAuto-c
Could be an issue with the power steering. Have your mechanic look at it.
Okay, Car's engine is on and standstill with just the foot brake pressed in 1st gear, when steering all the way, left or right there's a rubbing/screeching sound from behind. What could this possibly be??
+Mrittunjoy Chowdhury We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
Check for a worn, glazed belt or lack of power steering fluid.
Cv joint should not have play, it is supposed to be solid so there will be no vibration when spinning. A little play in the inner cv joint will cause vibration during acceleration.
What if there is no clicking but grinding noise with light steering vibration
Might be a bearing?
Will the cv cause a howling noise?
Wheel bearing
Hi, i have a 99 Nissan Altima. I was testing it on an empty parking lot turning all the way to the right, where I could swear I heard a loud grinding noise. However when taking it to the mechanic, they tell me that it’s the right side cv axle, not left that needed to be replaced. Is this possible? Again, I almost sure I heard the sound coming from the left, however I’m 100% positive the noise comes when I really make those sharp right turns. Thank you for whoever answers.
+Michael Toro We can't accurately diagnose the issue without seeing the vehicle. We would suggest taking it to a few different trustworthy mechanics and see if they all give you the same diagnosis.
mine makes noise when i reverse only, is the still the cv joint?
could be differential or transfer case
How to can we identify a bent cv axle?
On my 98 nissan maxima, my brakes were pulsating really bad. Turned out my axle was bent.
I hear a clicking sound but only when I reverse ?
How do you know what side the problem is on?
+William Hawkins You would need to have your vehicle diagnosed by a professional if you aren't sure which side has failed. Thank you for watching.
I have a question. My CV-Joints were replaced by the mechanic in the service center. However, I still hear the clicking sound when I make a full left turn of the wheel? I brought it back to the shop but they didn't eliminate the clicking sound. I can still hear them when i make the full left turn. Can you give me suggestion for me to say to the mechanic other options or ways to fix the problem of my car? Thanks a lot 1A Auto Parts.
+RL 4JC You may also want to check the wheel bearings to see if they are worn and need to be replaced. Hope this helps you out. 1aauto.com
My doesnt click or leak but it was bad
I have a 2004 nissan bluebird sylphy, the car makes a faint knocking sound from the front passengers side when i reverse. Could cv joints cause this?
+Cairo M Since there could be multiple reasons why you’re experiencing this difficulty with your vehicle, I strongly recommend that you have a reputable mechanic inspect it. They’ll be able to troubleshoot the problem and tell you what part or parts you’ll need for the repair. It is much easier to get a proper diagnosis in person rather than remotely.
Will the clicking noise be in the vehicle or on the outside?
+TLH Thank you for checking us out. While the clicking noise is located outside, you may still hear it while sitting in the vehicle. 1aauto.com
both
You will feel it in the steering wheel and hear it as well.
What about if your only hearing the clicking when you're driving straight
Might be a bearing or brakes need service
Nylon gear hum inside of vehicle going down road what are reasons
2006 buick rendezvous
2006 Buick rendezvous wheel drive
+Ronnie Rohde We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
+Ronnie Rohde We wouldn't be able to diagnose an issue like that here, you may want to have a local mechanic take a look at it. Thanks for checking us out! 1AAuto.com
my sierra stops completely then goes with grinding
what about 02 chevy avalanche when the 4/4 is on it feels rough
i have a 2013 kia sportage, between 35 to 45 mph start like a wheel bearing noise(right side), on highway when change to right line i can hear noise when change to left line no noise. tried to move tire 9 and 3 oclock and 6 and 12 oclock no movement. on kia dealer said its a bad wheel bearing so i decided to replace wheel bearing by myself and the noise still there. what else can be? cv axle?
+Jose Diaz You may want to check the axles and the other steering components. Hope this helps you out. 1aauto.com
Ok so unfortunately as a single mother I can not afford a machinic so I do research I know some things and I have to do them on my own I just need to know if I need a cv axle replacement I have clunking or clicking whatever plus what no one else is describing I also have what sounds like metal grinding with the clicking to me almost sounds like if my brakes were bad or caliber but I just replaced brakes n caliber seems to look ok but back to the other issue I only have 1 vehicle can't afford a mechanic n I need it to go back n forth to work so if anyone can point me to the direction it could be the cv axle that would be great thank you