That was the simplest, quickest, most straightforward and effortless instructional video compared to the previous 3 I tried to watch and couldn’t follow. Thank you🙏🏼
this video was so helpful!! i had already gotten my oil change and couldn’t figure out how to reset this myself with any other instructions. i’m saving this video for future times of resetting. thank you 🙌
Dude. Great simple video. This worked FIRST TRY after watching countless videos and growing frustration on other Prius years and models. I did this first try on a 2017 Prius C, I just followed your instructions. Set the trip to Odometer, not trip A or trip B. Turned it off. Let screen go black. Note: I do not have a power button, I just turned the key to on, pressed trip 3 times and held it down on the third press, and voila! It did the countdown thing and reset. I did nothing with the brake pedal as some comments below said was required. I rarely leave comments or likes, but you get both. Why Toyota forces people to stare at MAINTENENCE REQUIRED (I know why, money to be made by their service dept.) is beyond annoying, just because I decided to get an oil change somewhere other than the "Dealership." Thanks! 👍👍👍
Thank you! My mechanic couldn’t even figure it out. The manual doesn’t tell you to wait for the screen to go black before turning it back on. Very important step!
I find that many of these procedures on TH-cam tend to leave out important information or steps to the process. Here is the complete process that I find works: 1: Power on fully with foot on brake. 2: Scroll Trip through ODO, Trip A and Trip B to get to ODO mileage. You must stop this scrolling when ODO shows. 3: Power OFF with foot on brake 4: Wait for screen to go black - this can take up to a minute to happen - just wait for it! If the screen does not go black before you proceed to the next step, the reset WILL fail! 5: Press the Power Button twice WITHOUT foot on brake. 6: While the blue startup screen shows, press the trip button 3 times and HOLD the trip button down on the 3rd press. Do not wait too long after the you press the Power Button the 2nd time - if the blue startup screen disappears before you start step 5, the reset WILL fail! 7: If you have done everything right to this point, you will see a count down from 55555, 44444, to 00000 and then Maintenance will have been reset. 8: If you believe you have done everything right and it still fails, get out the car and give it a few minutes before you try again. I hope this helps!
It's for the immobilizer system (look it up in your manual), and it's normal. The light flashes after the "Power" button has been turned off to indicate that the system is operating. The immobilizer system is designed to prevent the car from starting if a key hasn't been registered with the car's computer.
I find that many of these procedures on TH-cam tend to leave out important information or steps to the process. Here is the complete process that I find works: 1: Power on fully with foot on brake. 2: Scroll Trip through ODO, Trip A and Trip B to get to ODO mileage. You must stop this scrolling when ODO shows. 3: Power OFF with foot on brake 4: Wait for screen to go black - this can take up to a minute to happen - just wait for it! If the screen does not go black before you proceed to the next step, the reset WILL fail! 5: Press the Power Button twice WITHOUT foot on brake. 6: While the blue startup screen shows, press the trip button 3 times and HOLD the trip button down on the 3rd press. Do not wait too long after the you press the Power Button the 2nd time - if the blue startup screen disappears before you start step 5, the reset WILL fail! 7: If you have done everything right to this point, you will see a count down from 55555, 44444, to 00000 and then Maintenance will have been reset. 8: If you believe you have done everything right and it still fails, get out the car and give it a few minutes before you try again. I hope this helps!
Thank you for the step[ by step directions. My screen is fixed! And you're right about TH-cam leaving out important steps of the process. You saved me money and time.
I find that many of these procedures on TH-cam tend to leave out important information or steps to the process. Here is the complete process that I find works: 1: Power on fully with foot on brake. 2: Scroll Trip through ODO, Trip A and Trip B to get to ODO mileage. You must stop this scrolling when ODO shows. 3: Power OFF with foot on brake 4: Wait for screen to go black - this can take up to a minute to happen - just wait for it! If the screen does not go black before you proceed to the next step, the reset WILL fail! 5: Press the Power Button twice WITHOUT foot on brake. 6: While the blue startup screen shows, press the trip button 3 times and HOLD the trip button down on the 3rd press. Do not wait too long after the you press the Power Button the 2nd time - if the blue startup screen disappears before you start step 5, the reset WILL fail! 7: If you have done everything right to this point, you will see a count down from 55555, 44444, to 00000 and then Maintenance will have been reset. 8: If you believe you have done everything right and it still fails, get out the car and give it a few minutes before you try again. I hope this helps!
I come back to this video every 5k miles
Same bro😭😂
Me too 😂
How many miles on your guys pruis ? What year and model?
@@nbatalkz6635 I’m about to hit 190000 miles with a 2013 Prius c
@@rileygarner632 thank you for replying.
That was the simplest, quickest, most straightforward and effortless instructional video compared to the previous 3 I tried to watch and couldn’t follow.
Thank you🙏🏼
this video was so helpful!! i had already gotten my oil change and couldn’t figure out how to reset this myself with any other instructions. i’m saving this video for future times of resetting. thank you 🙌
After 20 tries I finally got it. Thank you
Dude. Great simple video. This worked FIRST TRY after watching countless videos and growing frustration on other Prius years and models. I did this first try on a 2017 Prius C, I just followed your instructions. Set the trip to Odometer, not trip A or trip B. Turned it off. Let screen go black. Note: I do not have a power button, I just turned the key to on, pressed trip 3 times and held it down on the third press, and voila! It did the countdown thing and reset. I did nothing with the brake pedal as some comments below said was required. I rarely leave comments or likes, but you get both. Why Toyota forces people to stare at MAINTENENCE REQUIRED (I know why, money to be made by their service dept.) is beyond annoying, just because I decided to get an oil change somewhere other than the "Dealership." Thanks! 👍👍👍
Waiting to get my oil change now and watching this again thanks. Had to remember to put foot on the brake pedal before turning the ignition! It worked
I take my car to Valvoline for oil changes and they could not figure this out! Super helpful! Thank you!
This is the best reset illustration 👌 👏
On point and easy pizzy, you're the best.
Simple steps and it works like a 💎 Gem
Thumbs down if you don’t like it? Are you kidding me!?!? Ofcourse we all like it!!!! you solved a issue these mechanics couldn’t solve
Thank you! My mechanic couldn’t even figure it out. The manual doesn’t tell you to wait for the screen to go black before turning it back on. Very important step!
Toyota mechanics know how to do it.. cars are specific these day, Toyota tech wont know how to do BMW, etc.
Same situation
Nice, thank you for sharing and for taking the time to capture this
Only video that was easy to understand and it worked!
That's a like! This worked on a 2013 C Two, which doesn't have the On push button. I just turned the key to On, and followed the rest of the steps.
Thank you for your reply. My 2015 has a key too.
Thanks. That worked perfectly and you explained it well. I got it reset on the first try.
Can you believe I rewatch this every oil change...
Worked like s champ! Only video that helped me.
Thank you! Saved me a trip back to the mechanic to get this light reset :)
your video was better than the other 3 showing how to do it some how worked when i listened to you
Glad I could help
Thank you so much you saved my life
xRhodie thoughtful comment was better than the video, thanks.
Thanks for making this video!
I find that many of these procedures on TH-cam tend to leave out important information or steps to the process. Here is the complete process that I find works:
1: Power on fully with foot on brake.
2: Scroll Trip through ODO, Trip A and Trip B to get to ODO mileage. You must stop this scrolling when ODO shows.
3: Power OFF with foot on brake
4: Wait for screen to go black - this can take up to a minute to happen - just wait for it! If the screen does not go black before you proceed to the next step, the reset WILL fail!
5: Press the Power Button twice WITHOUT foot on brake.
6: While the blue startup screen shows, press the trip button 3 times and HOLD the trip button down on the 3rd press. Do not wait too long after the you press the Power Button the 2nd time - if the blue startup screen disappears before you start step 5, the reset WILL fail!
7: If you have done everything right to this point, you will see a count down from 55555, 44444, to 00000 and then Maintenance will have been reset.
8: If you believe you have done everything right and it still fails, get out the car and give it a few minutes before you try again.
I hope this helps!
You don't have to wait for the screen to go black if you open the door and close it
You always help me every time I change my fucking oil 😂😂
Perfectly explained/easy
So if I do this, and if there is an issue still, it will return correct?
Nice and simple. Good video.
I’ve been coming back to this video every oil change 😂
Hey Bravo thank you 🤜🤛
Thank you very much guys.
Thank you! I appreciate it.
What did he do?what did it change
How many miles on yours ?
Super helpful. Thank you!
Thank you 🎉
Worked ! Thank you ! 👌
Thank you! Heplfull
Thank you so much!!!!
Hi. Can you please tell me, what that blinking red light means on the right side? Looks like car and lock. I have same problem.
Thank you
It's for the immobilizer system (look it up in your manual), and it's normal. The light flashes after the "Power" button has been turned off to indicate that the system is operating. The immobilizer system is designed to prevent the car from starting if a key hasn't been registered with the car's computer.
Thanks bro!
Appreciate it, thx :)
Excellent 👍
Thanks
*awesome thanks*
Thank you!
Thanks!
This works!
Is there a way to turn that off?
Unfortunately no, just needs to be reset every service.
Looks easy, but directions not totally clear. I guess its a start. Thanks.
Thanks 🙏
الترجمه إلى العربيه رجاء❤️
Just happy to help.
Why are you turning it off? Shouldn't you take care of the problem?
You have to do it fast that was my problem
I DONT RECOMMEND ANYONE WEARING DIRTY GLOVES AND TOUCH KEYS AND INTERIOR
Agree, those are clean gloves by the way.
This did not fix it at all.
Bullshit that doesn't work
I find that many of these procedures on TH-cam tend to leave out important information or steps to the process. Here is the complete process that I find works:
1: Power on fully with foot on brake.
2: Scroll Trip through ODO, Trip A and Trip B to get to ODO mileage. You must stop this scrolling when ODO shows.
3: Power OFF with foot on brake
4: Wait for screen to go black - this can take up to a minute to happen - just wait for it! If the screen does not go black before you proceed to the next step, the reset WILL fail!
5: Press the Power Button twice WITHOUT foot on brake.
6: While the blue startup screen shows, press the trip button 3 times and HOLD the trip button down on the 3rd press. Do not wait too long after the you press the Power Button the 2nd time - if the blue startup screen disappears before you start step 5, the reset WILL fail!
7: If you have done everything right to this point, you will see a count down from 55555, 44444, to 00000 and then Maintenance will have been reset.
8: If you believe you have done everything right and it still fails, get out the car and give it a few minutes before you try again.
I hope this helps!
Thank you for the detailed instructions!!!
Yep because I tried her way and it did NOT work! I will have to try you way in a moment.
Just did it and YOUR way worked!!!
Thank you for the step[ by step directions. My screen is fixed! And you're right about TH-cam leaving out important steps of the process. You saved me money and time.
Thank you
Thank you so much !
Thank you!
Very helpful! Thank you!
Thank you
I find that many of these procedures on TH-cam tend to leave out important information or steps to the process. Here is the complete process that I find works:
1: Power on fully with foot on brake.
2: Scroll Trip through ODO, Trip A and Trip B to get to ODO mileage. You must stop this scrolling when ODO shows.
3: Power OFF with foot on brake
4: Wait for screen to go black - this can take up to a minute to happen - just wait for it! If the screen does not go black before you proceed to the next step, the reset WILL fail!
5: Press the Power Button twice WITHOUT foot on brake.
6: While the blue startup screen shows, press the trip button 3 times and HOLD the trip button down on the 3rd press. Do not wait too long after the you press the Power Button the 2nd time - if the blue startup screen disappears before you start step 5, the reset WILL fail!
7: If you have done everything right to this point, you will see a count down from 55555, 44444, to 00000 and then Maintenance will have been reset.
8: If you believe you have done everything right and it still fails, get out the car and give it a few minutes before you try again.
I hope this helps!
I have a 2019, and this STILL doesn't work.
It did thanks
100% accurate... thanks!
Thank you
Thank you