Thats for the video . Not the normal practice. Our roofs always look personal . 90 percent of my work insurance repairs. Not rushed in and out express stuff , I wouldn't waste or have the time to video that kind of work.
How do you get the rivets installed in the middle section ? Video only showed how to install the side rivets that seem pretty "easy" since it's on the outside... but what about the ones in the middle ?
Do you have a video of a total roof install rolled aluminum I'm trying to install rolled aluminum on my fifth wheel 41 ft Hallmark cyclone toy hauler thank you
Thank you Malcolm for the comment. Tools available for this industry seem to be limited. Of course this is based on the tools My colleges, my shop supply and my self have or have had. If you can provide links or company names of these specialty tools , that would greatly appreciated. Not everyone wants to stop make tools for there job . Happy holidays my friend
We made our own. It's called the hole finder. If you don't remove the old rivets and just add new ones, then the top rail is weakened, and it'll look like Swiss cheese.
Not being a troll, but it’s best to put caulk under your roof seems and use buck rivets because a pop rivets doesn’t hold well enough and the roof will eventually work it’s self loose then causing leaks. Also using j mold around your roofs are way faster especially after installing nose rails. Not being a a** hole just giving some advice. Have a great day.
that is unit in my fleet , if it fails . I will be paid to time and labor to redo it . It is a win win for our techs and shop .Customer repairs are as you described. I will not film those repairs as time is more limited.
Removed completely and replaced with new 3 /16 aluminum buck rivets on rails and 3/16 self seal pop rivets in aluminium skin . We use foam tape between the two surfaces around.
I like the tape before the sealant! Great idea for a clean look .
Thats for the video . Not the normal practice. Our roofs always look personal . 90 percent of my work insurance repairs. Not rushed in and out express stuff , I wouldn't waste or have the time to video that kind of work.
That is first class metal work ! I enjoy watching pros that get such great results !
Thank you
More to comes
If you guys need help in central Florida hit me up. Awesome work by the way and stay safe on top of those roofs
F ya , that’s awesome , im doing a lot of fabrication and trailer repair, thank you , absolutely kicks ass
Very nice job sir, experience can not be bought. I deff tried myself
How do you get the rivets installed in the middle section ? Video only showed how to install the side rivets that seem pretty "easy" since it's on the outside... but what about the ones in the middle ?
AFTER THE SEALER ,BRUSH -ON THE TIN COAT SEALER .
Is that seam bucked in or pop rivet or mono bolt
Bucked
where did you get that rivet gun ,
I have the same problem but i dont have those tools, how can i do a quick fix?
Do you have a video of a total roof install rolled aluminum I'm trying to install rolled aluminum on my fifth wheel 41 ft Hallmark cyclone toy hauler thank you
Small roof repair have not edited yet may may not help
@rafdecc how did it go? Where did you get coil?
GREAT VIDEO !!
Get a squeeze rivet gun and get rid of the scissor lift.
Ok
What's the name of this tool
THEY MAKE A TOOL TO FIND THE REVIT HOLES WHEN YOUR REPAIRING THE ROOF .
Thank you Malcolm for the comment. Tools available for this industry seem to be limited. Of course this is based on the tools My colleges, my shop supply and my self have or have had. If you can provide links or company names of these specialty tools , that would greatly appreciated.
Not everyone wants to stop make tools for there job . Happy holidays my friend
We made our own. It's called the hole finder. If you don't remove the old rivets and just add new ones, then the top rail is weakened, and it'll look like Swiss cheese.
what sealant have you used?
th-cam.com/video/12itdzRQf2k/w-d-xo.html
this is the sealant.
How much was the bill
Congratulations nice
what is the hourly rate of such work?
Don't have that info
@@mikeydesilva8197 how much do you get per hour of work
@@romannazar wont share that info with anyone. I wil say experience and skill are a plus.
nice Bucking Bar
fork lift bar
Where did you get your air hammer like a die grinder????
Air srapper
Cool
Your using pop rivits on your roof seems?
Not being a troll, but it’s best to put caulk under your roof seems and use buck rivets because a pop rivets doesn’t hold well enough and the roof will eventually work it’s self loose then causing leaks. Also using j mold around your roofs are way faster especially after installing nose rails. Not being a a** hole just giving some advice. Have a great day.
@@wickedchevy9852 check out my chevy
@@mikeydesilva8197 nice car
@@wickedchevy9852 cheers
that is unit in my fleet , if it fails .
I will be paid to time and labor to redo it . It is a win win for our techs and shop .Customer repairs are as you described. I will not film those repairs as time is more limited.
Can tell me what’s the tool name
Did you go over the old rivets with the sheeting since you are sealing or did you take them out?
Removed completely and replaced with new 3 /16 aluminum buck rivets on rails and 3/16 self seal pop rivets in aluminium skin . We use foam tape between the two surfaces around.
@@mikeydesilva8197 what's the cheapest tool to seal it underneath is that air hammer?
@@coletanner5193 pneumatic scraper 3/8 just use light duty air hammer
And flat piece of steel rivets are soft
Where are you located?
Canada Ontario
Do you repair these for anyone or is there a company you work for?
My company works for anyone and fleets
@@mikeydesilva8197your location address please?
man i really wish i could see these videos sooner. nice work, I needed this. also where do you get air tool for bucking the rivet?
Pneumatic scraper not ment for this job just works and cheers.