Awesome videos! I have a family member that was working on the construction of Miller Park (not on the cranes) when the Big Blue Crane collapsed due to wind speeds being 25-27mph and the boom on the crane was rated for 20mph. I’ll always remember that incident. No better statement than there is no work more important than the safety of the crew doing the work.
Nicely done the view at the top messes with my perception of what looks good and what is good. Whatever they pay you for your time you are worth it and then some. Have a great week.
I was called to set trusses on a cranberry farm. 90 foot span, 150 foot long building with 20 foot high walls. Brickl Brothers was the contractor. I got set up and picked up the first truss, but the wind was steady at 20 mph, gusting to 35. (they have weather stations all over the marsh) The guy sitting on the side wall was signalling frantically to swing the truss over, but I looked up, and my boom was side loading like crazy, I had to call it off. My boom tip must have been 20 feet ahead of the truss! They sent me home, and hired a bigger crane. The law is still the law, and a bigger crane isn't the answer. I hope no one got hurt.
That looked like fun.....edge of the seat stuff I might say. If the bolt wont go in just hit it with a hammer. Good job on all levels. Found your channel from LetsDig18.
Awesome video I heard about your channel from Logger Wade. Does your seat tip back with the controls? If it doesn't you must have one strong neck!!! I always have been fascinated by cranes. I'll watch them all and look forward to more. Great Job!!!
Ted John, the inside of the cab and the controls do tilt back. I don't use it all that often though. It give me a strange sensation with it leaned back. Almost like I'm tipping over backwards. I suppose if I kept it tilted for a while, I'd get past that.
I used to be a tower hand I used to love it but the company started sending me out of state & my family started missing me & I started missing my family so I changed to HVAC
Duncan MacKenzie, I always try to reply. There are a few comments that slip through the cracks every now and then. But, I do my best to reply to everyone. The way I see it, if a person goes out of their way to write to me about a video, it would be awfully disrespectful for me not to extend the same courtesy.
I really do appreciate that but it might become too much of a burden as your channel grows. I certainly could understand that and anybody with any common sense would understand that too. Say you've got a million people commenting, there just wouldn't be enough time in the day to read and answer them all, just as a for instance. You see where I'm going with this. No need to reply.....lol. Have a great rest of the day.
You're going to have to split these up into more parts. I can't hold my breath for 20 min. without passing out. I would have to have a Valium the size of a football to even think about doing that. After work do you just rip the top off a keg to relax?
72+HourBOB, cell towers are my least favorite jobs so far. There are times when I would like to submerge myself in a barrel of whiskey. However, I have a rule for myself of no drinking on a work night. I don't want even a trace of alcohol in my system while operating. Many thanks for watching! 🙂👍
MrTodd51, I was on the edge of mine too. Some things a person just never gets completely comfortable with. In those times, we just have to trust our machine and our own knowledge.
I am with you Blazer. I remember my first trip to the top of an unsupported 100' ladder and could not believe how much that thing was twisting. I got used to it in years to come. As a rookie we had to climb up one side, over the top, and back down the other side in a 45' Flagpole ladder raise supported by four of your fellow rookies holding the ladder vertical by ropes. Never had to do it other in that rookie training..
Daniel Demag, a few of the house setting crews that we work with don't use spreader bars. They use long 6 inch wide straps. I actually prefer no spreader bars if possible. The house doesn't move around as much and there's less rigging. Also, the crews have padded blocks that they slip in against the eve where the straps sit. That keeps the straps from damaging the house and vice versa. Thanks for watching! 🙂
Lawn Commander, no. We are very well versed in all of the OSHA standards that pertain to our careers. We study that thoroughly during the crane certification process.
Do you know what radios the climbers typically use? There's a new tower near me being constructed and their at this phase. I'd kinda like to listen in on what they're saying. Is it FRS or GRMS?
I have my scanner scanning all the FRS channels. I also have been looking around that frequency range with a SDR (software defined radio) dongle. It was overcast with scattered showers and wind, probably nothing much was done today.
Horsein with a crane is never a good idea especially with three men's lives at stake. Add another piece of jib or get a bigger crane is a much better idea. I've seen guys do stuff like this for years and get away with it, but sooner or later your luck will run out
Awesome videos! I have a family member that was working on the construction of Miller Park (not on the cranes) when the Big Blue Crane collapsed due to wind speeds being 25-27mph and the boom on the crane was rated for 20mph. I’ll always remember that incident. No better statement than there is no work more important than the safety of the crew doing the work.
Nicely done the view at the top messes with my perception of what looks good and what is good. Whatever they pay you for your time you are worth it and then some. Have a great week.
Jeff Pratt, thanks for the kind words. ☺
Starting as a climber building towers in a few weeks, this video is amazing and has me so excited to get started!
How do you get a job like thay
Amazing video. High precision at 240' and protecting the lives of three men at the top.
Chris Rowland thank you sir. The safety of everyone involved is priority #1.
Dam fine job man, I can feel the stress in this video lol.
Lorne H, thank you! It was definitely stressful. Thanks for watching! 🙂👍
Thanks for the insight. Cautious work.
I was called to set trusses on a cranberry farm. 90 foot span, 150 foot long building with 20 foot high walls. Brickl Brothers was the contractor.
I got set up and picked up the first truss, but the wind was steady at 20 mph, gusting to 35. (they have weather stations all over the marsh) The guy sitting on the side wall was signalling frantically to swing the truss over, but I looked up, and my boom was side loading like crazy, I had to call it off. My boom tip must have been 20 feet ahead of the truss!
They sent me home, and hired a bigger crane. The law is still the law, and a bigger crane isn't the answer. I hope no one got hurt.
That gets better every time I watch it. You have to admit there's something wrong with those guy's on that tower.😳😕
What do you mean
@@Sciron there nutz
Geeze Jimmy...pros makin' it look smooth as glass!
eSPeeScotty, thank you for the compliment. 🙂
Nice job! I don't know how you do it, that one had my bp up.
MS Earthworks, mine too. Thanks for the compliment.
CAN I BREATHE NOW ! 😊
Thanks for sharing and take care. 👍 👍
+Ken Gamble, that one was a tad spooky. Lol. Thanks for watching. 🙂
That looked like fun.....edge of the seat stuff I might say. If the bolt wont go in just hit it with a hammer. Good job on all levels. Found your channel from LetsDig18.
chrispy_wa, thank you, and thanks for watching! 🙂👍
Awesome video I heard about your channel from Logger Wade. Does your seat tip back with the controls? If it doesn't you must have one strong neck!!! I always have been fascinated by cranes. I'll watch them all and look forward to more. Great Job!!!
Ted John, the inside of the cab and the controls do tilt back. I don't use it all that often though. It give me a strange sensation with it leaned back. Almost like I'm tipping over backwards. I suppose if I kept it tilted for a while, I'd get past that.
How many Tons of crane you used here?
200 ton capacity crane.
@@ToTheTopCrane Thanks.
I used to be a tower hand I used to love it but the company started sending me out of state & my family started missing me & I started missing my family so I changed to HVAC
This is so cool!!
Crazy Cool 😆 👍🏻
ASE Music, thank you!
Good job sir
You must have a tough neck what with having to be continually looking up. Thanks for the videos.
Duncan MacKenzie, the seat reclines and the inside of the cab tilts backwards. That definitely helps. 😉
I see, that *would* make a hell of a difference. Thanks for the reply.
Duncan MacKenzie, I always try to reply. There are a few comments that slip through the cracks every now and then. But, I do my best to reply to everyone. The way I see it, if a person goes out of their way to write to me about a video, it would be awfully disrespectful for me not to extend the same courtesy.
I really do appreciate that but it might become too much of a burden as your channel grows. I certainly could understand that and anybody with any common sense would understand that too. Say you've got a million people commenting, there just wouldn't be enough time in the day to read and answer them all, just as a for instance. You see where I'm going with this. No need to reply.....lol. Have a great rest of the day.
Did you see the size of jimmys neck it’s makes mike Tyson look small
I always tell the tower & tree guys, "I don't mind heights, as long as I'm looking up at 'em!"
You're going to have to split these up into more parts. I can't hold my breath for 20 min. without passing out. I would have to have a Valium the size of a football to even think about doing that. After work do you just rip the top off a keg to relax?
72+HourBOB, cell towers are my least favorite jobs so far. There are times when I would like to submerge myself in a barrel of whiskey. However, I have a rule for myself of no drinking on a work night. I don't want even a trace of alcohol in my system while operating. Many thanks for watching! 🙂👍
Always wanted to be a crane operator but dont know where to start
Maybe old hat for you but I was on the edge of my chair, ha.
MrTodd51, I was on the edge of mine too. Some things a person just never gets completely comfortable with. In those times, we just have to trust our machine and our own knowledge.
@@ToTheTopCrane You are right, I agree with you !
Love the videos but man does watching them make me hate heights even more then I do a!ready lol
DC8N, don't worry. I don't do heights either. Lol. Thanks for watching! 🙂
I've been up 102 feet on a FD ladder truck. BUT tower work, NOPE not me...
Blazer02LS, I'm not climbing either. Lol
I am with you Blazer. I remember my first trip to the top of an unsupported 100' ladder and could not believe how much that thing was twisting. I got used to it in years to come. As a rookie we had to climb up one side, over the top, and back down the other side in a 45' Flagpole ladder raise supported by four of your fellow rookies holding the ladder vertical by ropes. Never had to do it other in that rookie training..
We did that drill at least once a year using a 50 foot bangor ladder... HEAVY F%^$$ing thing.... Don't miss that at all.
Do they ride the boom to get into position or they climbing ??
hey Jimmy I watched video on you setting house I noticed they didn't use spreader bars
Daniel Demag, a few of the house setting crews that we work with don't use spreader bars. They use long 6 inch wide straps. I actually prefer no spreader bars if possible. The house doesn't move around as much and there's less rigging. Also, the crews have padded blocks that they slip in against the eve where the straps sit. That keeps the straps from damaging the house and vice versa. Thanks for watching! 🙂
Any clue what the tower cost?
In the caption when two block warning is on, can't you winch out or boom up??
Do you have OHAS or other agencies on work sites, who makes the final call as for safety
Lawn Commander, no. We are very well versed in all of the OSHA standards that pertain to our careers. We study that thoroughly during the crane certification process.
I really thought all cranes would have joy stick cams at the top by now, it would take all the guess work out and speed thing up.
That1ufo, the only cameras that are mounted from the factory are pointed at the winches.
Do you know what radios the climbers typically use? There's a new tower near me being constructed and their at this phase. I'd kinda like to listen in on what they're saying. Is it FRS or GRMS?
I'm not sure. Every crew seems to use something different. You may be able to pick them up with a cheap radio that is set to scan mode.
I have my scanner scanning all the FRS channels. I also have been looking around that frequency range with a SDR (software defined radio) dongle. It was overcast with scattered showers and wind, probably nothing much was done today.
Ahhh, the sound of a rigger delicatly adjusting something.
+Shaun Minifie, "delicatly" with a three pound hammer. Lol. Thanks for checking out my channel. 🙂
Horsein with a crane is never a good idea especially with three men's lives at stake. Add another piece of jib or get a bigger crane is a much better idea. I've seen guys do stuff like this for years and get away with it, but sooner or later your luck will run out
I had a little stress. Lol.
02pwrstrk I did too. Lol
just so big brother can spy on us