Do you know what I like to do after I’m done mounting sanding and cleaning my tires I like to put the warmers on them get them up to temperature and then put the sauce on them and put them in the bag see that sauce suck right into that tire
Wintergreen and xylene for conditioner, 50/50 mix. Pine rosin and 99% iso alcohol, it's called "Treed". 4:1 alcohol to rosin to start for dirty surfaces, higher concentration of rosin for cleaner surfaces. Tire prep is the key
Damn, I'd hate to see your glue budget, lol! (this video is old so, maybe you revised your application?). The white residue or 'frosting' is caused by the excess glue reacting with moisture in the air. Use a proper applicator and you'll dramatically reduce the amount of glue you use AND you will actually get a stronger, neater application that will reduce the 'frosting'. Also, be careful applying cleaner/conditioner/prep on the sidewalls, they will debond the tire glue. 👍
Naptha! Only thing to use if you’re using prep in my opinion. Let it totally dry then heat tires for 4-5 minutes and then put prep on. Let prep dry or flash and then send it!
No sir! The Proline glue is very thin and the first pass I am putting pressure on the rubber and it gets down in there. Second pass I am doing a full pass for the wheel portion. I’ve been running the same wheel/Tire combo on my car for quite a while now and zero issues. Car is running consistent 2.14-2.200 on GNSS @70-73mph
Asome Video when i butt a Normal Reaktion tire on a Wide showtime wheel Work this goog i streched the dire out Work this or is better A normal Reaktion on a Normal Drag Wheel how nows that one nice day good luck
I really appreciate the video. Thanks. You don’t talk to much either.
Excellent video thanks a lot
I heard using cherry bomb by putting some on then bagging every week before race day helps alot and makes it even softer
Good vid bro your supposed to talk LOL 🤙🏻🤙🏻
Hey question, do you put vent holes in the wheels? I’m running reactions with foams on showtime wides. Thanks. Love the vids
The showtime Plus wheels already have vent holes. So you won’t need to add any
@@gravityracergt awesome thank you!
💪🏾💯
I'd buy that for a dollar!
Do you know what I like to do after I’m done mounting sanding and cleaning my tires I like to put the warmers on them get them up to temperature and then put the sauce on them and put them in the bag see that sauce suck right into that tire
That's the way to do it🤙🏼💯🏁
Wintergreen and xylene for conditioner, 50/50 mix. Pine rosin and 99% iso alcohol, it's called "Treed". 4:1 alcohol to rosin to start for dirty surfaces, higher concentration of rosin for cleaner surfaces. Tire prep is the key
Where can the normal person buy this stuff?
We are coming out with a prep. I’ll be making a video on it soon. It’s a game changer 💪🏻
Is there anything else mixed in or just as you stated?
Stupid question time. You said bag them I assumed ziplock but next video you had them saran wrapped. What do you consider bagging them?
Ziplock or wrapping. Personal preference honestly
is there a no prep, no prep?
like need to open bag 2 minutes before run?
No but I would be down haha. I know a good process for making tires work right out of the bag as well.
will this tire glue work for gluing drag wheels J Concepts 2043T Advanced Formulated Tire Glue -Thin,
I don’t see why not. My go to has always been the Proline Glue it’s Never let me down
@@gravityracergt ok thx
do i wait a week for the front to dry, then wait another week for backs to dry?
If you use the proline glue you can do the opposite side in about 30 minutes.
What are you using to hold tire in drill?
www.michaelsrchobbies.com/gravity-rc-llc-tire-break-in-bit.html
does using sand paper on the rims help getting the tires on
It makes the edge have a little texture and helps the glue hold better
@@gravityracergt what grade sand paper to sand rims would you suggest? Thank you
@@marksmola2025 Doesn’t have to be anything crazy. Just enough to scuff them and give them a good texture for the glue to grab onto. I use 80grit
Damn, I'd hate to see your glue budget, lol! (this video is old so, maybe you revised your application?). The white residue or 'frosting' is caused by the excess glue reacting with moisture in the air. Use a proper applicator and you'll dramatically reduce the amount of glue you use AND you will actually get a stronger, neater application that will reduce the 'frosting'. Also, be careful applying cleaner/conditioner/prep on the sidewalls, they will debond the tire glue. 👍
What's in the spray bottle as a cleaner
OMS
What foams are you using
Proline Blue Foams
What do you use as a cleaner between runs?
Naptha! Only thing to use if you’re using prep in my opinion. Let it totally dry then heat tires for 4-5 minutes and then put prep on. Let prep dry or flash and then send it!
No glue straw and getting glue into wheel grooves???
No sir! The Proline glue is very thin and the first pass I am putting pressure on the rubber and it gets down in there. Second pass I am doing a full pass for the wheel portion. I’ve been running the same wheel/Tire combo on my car for quite a while now and zero issues. Car is running consistent 2.14-2.200 on GNSS @70-73mph
What kind of car is that?
Team associated SC6.2 chassis with B6.1 Arms. No Prep Drag car
Asome Video when i butt a Normal Reaktion tire on a Wide showtime wheel Work this goog i streched the dire out Work this or is better A normal Reaktion on a Normal Drag Wheel how nows that one nice day good luck
Normal Reaction on a Showtime Plus wheel
Robo cop
Yep! Haha