Stuffing Tube & Flex Cable Full Install Shrimp Outrigger Rc Boat Build Pt2
ฝัง
- เผยแพร่เมื่อ 24 พ.ค. 2022
- Shrimp Outrigger Build Pt 1 Stuffing Tube & Flex Cable Full Installation
SHRIMP OUTRIGGER
www.ebay.com/itm/333923876704...
52 mm rudder
www.offshoreelectrics.com/pro...
032 MUSIC WIRE
www.ebay.com/itm/373929016427...
CAPILLARY TUBE 1/16 od .08 ID
www.ebay.com/itm/182188423711...
3/32 BRASS TUBE
www.ebay.com/itm/294009836106...
MICRO SERVO
www.ebay.com/itm/234072650713...
Thanks for watching ironclad rc tinker test and tune everything
Personal contact information ironcladedout@gmail.com
![CAMPปลิ้น | EP.76[1/2] โจโฉเปิดป่าโหดรับโอ๊ต-ป๊อบ รอบนี้พี่เอาจริง!](http://i.ytimg.com/vi/pNg5O7Pf-a0/mqdefault.jpg)
I can't wait to see this rip! For mixing epoxy try using an empty soda or beer can. Flip it over and mix it in the concave portion on the bottom side of the can. When you mix it up it will naturally run back to the center and not spread out like if you use cardboard. As a bonus the aluminum can is so thin you can actually feel it heat up so you know when it's about to kick off. Now you just need some empty beer cans 🤣
I've used soda/beer cans works great. 💪
Just ordered a kit for myself. Just getting into the hobby but I’ve already learned a lot from vids. Keep up the great content big b. 🤘🏼
Awesome! Thank you!
Lookin Iron Clad brother, nice job
Really neat drive installation there Big B. The hardware is looking great 👍
Interesting choice of motor and ESC. Made me smile when you were epoxying the stuffing tube and you said you want to keep the boat as light as possible. That motor and ESC certainly aren't light for a featherweight rigger, so will be interesting to see if the power/weight trade off works 😉
I want to keep the BOAT light basically because of the heavy electronics. It will probably sink into the abyss, first run out.
Learning allot from ya man thanks
Going to be AWESOME BIG B
My next Challenge is going to involve motor/prop/ESC/battery selections in a type of cheap and easy to build hull that has been the subject of a lot of experimentation on my part. I quickly discovered it is really easy to put so much power in a hull that it performs more like the Space Shuttle; launching itself many feet into the air at the first blip of the throttle. Use caution when you maiden that thing......
I wanted to run smaller motor & esc
@@IRONCLADRC You can bet I will not be drinking coffee when I watch that video. It's going to be a rocket, one way (vertically) or the other (horizontally). Either way it's going to be "Must See Video".
Space shuttle you say? Now I’m really interested
Yea man it should be extremely competitive
@@norcalrc Big B is definitely building a rocket. As for the Challenge v2.0 boats I've been working on, some of my early power systems did just that: Space Shuttle, followed shortly thereafter by fish swimming underwater, and back to Space Shuttle again. It was actually hilarious. I think Big B's rocket will be more successful, but things will happen really fast at the speeds I expect to see with that setup.
Another great video for us noobs! Thanks Big B.
Thanks brother, how's the build going.
@@IRONCLADRC Great! You will be happy. Check your email!
Im watching your videos as I install the servo and motor right now. This is super fun building boats...way easier than airplanes back in the day.
Can you do video of you hatch build
I'm doing one of these now and I'm really struggling in the UK to find a strut that only has 2 fixing holes. Any help would be appreciated
If I do one of those Mini Riggers,, i'd be putting in a .065 wire drive set up, from like ''Wolts''.
''A lot'' less hassle than the cable drives,, & noticeably smoother & definitely ''lighter,'', plus just fine for small stuff. 😉
Been messing with Hydro's & Riggers ect. for over 30 years...
Don't know why you call that a submerged drive ?? 🤔
When Riggers & Hydros are set up right,, there should be less than 1/2 of the prop in the water ''when on plane'', & pretty much ''none'' of the strut,, which translates to a ''surface drive''.
My 2 cents.
I
Sorry for the miss information, I'm no pro, just like sharing the hobby.
I bought a Rigger boat constructor, collected everything, the first experience. It does not drive well, does not develop speed, how to properly adjust the angle of the propeller? Thank you.
The Strut should be parallel to the ride surface, set the boat on a table top so the sponsons are touching and adjust the strut flat with the table top
I think its going to rip with that motor setup! Are you going to paint it?
Yes sir one I get it rigged out I will disassemble and paint.
Hey bro did you assemble that when you buy on online or she already assembled when you buy that outriggers wood
It's the online shrimp out rigger kit that needs to be assembled fairly straight forward build.
Shits going to rip man bad ass
Hey ironclad how can I contact you to ask you some questions on an boat up grade .I need to explained how I want it to perform.
ironcladedout@gmail.com
👍🏽
Would UV resin work?
Not exactly sure what rv resin is?
Hallo do you have a plan of that boat thank you greetings
It's a shrimp rigger found on ebay and Ali express
The outriggers have been making me curious lately
There fun to mess with but can be a little aggravating at times leaving you scratching your head. Very tight everywhere, when I say everywhere I mean everywhere.
If it's a scratch build it takes alot of preparation and planning.
If I were to recommend a rigger I'd get a kit with everything included! Like zipkits with the hardware package and use recommend electronics.
This rigger and my ironclad rigger was & is a pain in my a&&
@@IRONCLADRCyeah I like the sound of the complete kit. I am an experienced carpenter but the scale part in new to
@@IRONCLADRC gluttons for punishment we are