Arrrgh! I just replaced the antique lever switch in a 1980 TXT and then I saw this setup! I’m making a note of it and your install, it will look amazing when you get it all loom managed in there! Great job!
Good work, a suggestion, write down every step that you would take to perform the work, then put those on the screen and say at the same time like a list. Other than that, keep up the great work!!
So I have followed along with your video but I'm missing where my blue wire from my key switch goes. Originally I had a wire running from the positive battery to the f&r switch, and then the other connection on the f&r switch was the blue wire. In your video you showed you came from the solenoid to the middle of your FNR switch, but then you had another wire coming from the positive of your battery pack and you were going to put a fuse on it. But where did you connect that?
@@kartkrazy Got it! Needed a new wire from the +battery to the blue wire which goes to the key switch. Then from the center of the new F&R switch to the +side of the solenoid like in your video. Thanks!
Hey Jeff I have a 2001 EZGO 36V with the manual F/R shifter that I want to convert to an electric switch. Any guidance you can provide? Step by step install video and parts list?
This video is the best for doing that conversion… is there something else specific I can help you with? As stated in the video, Karl @Ev Drives can get you all the parts
My cart has an orange, blue (keyswitch), and black wire from where the lever style assembly used to be, where do I put my orange, blue, and black wires too?
I would definitely need more information… Like where the wires come from? what year is the cart? It’s kind of like trying to give a haircut over the phone
@@kartkrazy 2000 TXT 48V. the wires im talking about came off of the old FNR assembly. The old assembly had the orange wire leading to a microswitche , the black wire leading to a ground on the assembly, and the blue wire leading to a microswitch as well
Arrrgh! I just replaced the antique lever switch in a 1980 TXT and then I saw this setup!
I’m making a note of it and your install, it will look amazing when you get it all loom managed in there! Great job!
😊
Good work, a suggestion, write down every step that you would take to perform the work, then put those on the screen and say at the same time like a list. Other than that, keep up the great work!!
I appreciate the comment and thanks for watching!!
So I have followed along with your video but I'm missing where my blue wire from my key switch goes. Originally I had a wire running from the positive battery to the f&r switch, and then the other connection on the f&r switch was the blue wire. In your video you showed you came from the solenoid to the middle of your FNR switch, but then you had another wire coming from the positive of your battery pack and you were going to put a fuse on it. But where did you connect that?
It’s not my cart but if I remember correctly that should go to the key switch…
@@kartkrazy Got it! Needed a new wire from the +battery to the blue wire which goes to the key switch. Then from the center of the new F&R switch to the +side of the solenoid like in your video. Thanks!
Hey Jeff I have a 2001 EZGO 36V with the manual F/R shifter that I want to convert to an electric switch. Any guidance you can provide? Step by step install video and parts list?
This video is the best for doing that conversion… is there something else specific I can help you with?
As stated in the video, Karl @Ev Drives can get you all the parts
My cart has an orange, blue (keyswitch), and black wire from where the lever style assembly used to be, where do I put my orange, blue, and black wires too?
I would definitely need more information…
Like where the wires come from?
what year is the cart?
It’s kind of like trying to give a haircut over the phone
@@kartkrazy 2000 TXT 48V. the wires im talking about came off of the old FNR assembly. The old assembly had the orange wire leading to a microswitche , the black wire leading to a ground on the assembly, and the blue wire leading to a microswitch as well
@@Jordan-n2d I would have to pull up a wire diagram for a 48 V… The one in the video is a 36 V
Hey Jeff, can you use this same setup on a 2008 txt with a robins 295 engine?
Negative…electric only
@@kartkrazy ok thanks, love your videos!!,
@@loaderman252 thanks for watching 👍🏻
@loaderman252 thank you for watching!!
How much was this kit? Would you need a new controller if you had the stock controller to switch to this f and r setup?
Will work with stock controller…price varies depending on setup. No more than $400
Get with Karl at www.evdrives.com
Where to buy
@@jeffwatson5117 evdrives.com/
My name Jeff....😂👍
😎